|
|
|
Intake...
- Air Filters...
- Blow Off Valves
- Piping
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Due to size/weight restrictions,
oversized items cannot be shipped by EMS.
oversized items cannot be shipped by EMS.
Item discontinued. Stock no longer available.
Full Listing
| Categories: | |
Electronic Parts
 | Apex APEXi AVC-R (Boost Controllers) -420-A004 |  ITEM DETAILS |
| Acutator Valve Controller Type-R. | DISCONTINUED |
 | Blitz A/F Box (Boost Controllers) -15063 | ITEM DETAILS |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional Press Sensor Set. | DISCONTINUED |
 | Blitz Dual-SBC Spec R (Boost Controllers) -15059 | ITEM DETAILS |
| High performance Digital boost controller. Twin solenoid (~2.5kg/cm3). | DISCONTINUED |
 | Blitz Dual-SBC Spec S (Boost Controllers) -15058 | ITEM DETAILS |
| High performance Digital boost controller. Single solenoid (~1.2kg/cm3). | DISCONTINUED |
 | Blitz External Voltage Input Harness (Boost Controllers) -15053 | ITEM DETAILS |
| Optional part for use with SBC-iD/SBC i-Color to display one additional ECU signal (0~16V). | DISCONTINUED |
| Blitz Press Sensor Set (Boost Controllers) -19211 | ITEM DETAILS |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional A/F Box. | $ 69.29 |
 | Blitz Remote Switch (Boost Controllers) -15045 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz SBC i-Color Spec R (Boost Controllers) -15082 | ITEM DETAILS |
| Multi Function & Full Colour Display. Twin solenoid valve. | DISCONTINUED |
| Blitz SBC i-Color Spec S (Boost Controllers) -15080 | ITEM DETAILS |
| Multi Function & Full Colour Display. Single solenoid valve. | DISCONTINUED |
 | Blitz SBC i-D Spec R (Boost Controllers) -15078 | ITEM DETAILS |
| Hi-DEF Boost Controller. Twin solenoid valve. | DISCONTINUED |
| Blitz SBC i-D Spec S (Boost Controllers) -15073 | ITEM DETAILS |
| Hi-DEF Boost Controller. Single solenoid valve. | DISCONTINUED |
 | Blitz SBC Type R (Boost Controllers) -15039 | ITEM DETAILS |
| High performance Digital boost controller. Twin solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
 | Blitz SBC Type S (Boost Controllers) -15040 | ITEM DETAILS |
| High performance Digital boost controller. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
 | Blitz SBC Type S PLUS (Boost Controllers) -15044 | ITEM DETAILS |
| High performance boost controller with improved visibility using a new VA liquid crystal display. Maximum 4 boost setting (modes) channels (Low, High, M-1 and M-2), while maintaining the performance of the previous model. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. Real-time boost display, after peak, peak hold, warning, limiter, scramble boost. By connecting the optional Blitz Remote Switch (Sold separately), scramble boost function can be engaged with the hand switch. The Blitz Remote Switch can also be setup to switch boost channels (modes) easily. | DISCONTINUED |
 | Blitz SBC-DC (Boost Controllers) -15060 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz SBC-iD III (Boost Controllers) -15085 | ITEM DETAILS |
| Twin sequential solenoid. | DISCONTINUED |
 | Blitz SI Drive Controller (Boost Controllers) -15099 | ITEM DETAILS |
| Enables more precise control of the SI Drive boost control system. Experience better acceleration or fuel economy as desired. Total of 12 modes. Plug and play installation (Only piping for boost control required). Built in boost meter with warning/peak hold function. | DISCONTINUED |
| Blitz SI Drive Controller Boost Jumper Set (Boost Controllers) -15091 | ITEM DETAILS |
| SI Drive Controller and R-FIT set. Enables more precise control of the SI Drive boost control system. Experience better acceleration or fuel economy as desired. Total of 12 modes. Plug and play installation (Only piping for boost control required). Built in boost meter with warning/peak hold function. | DISCONTINUED |
| Blitz Temp Sensor Set (Boost Controllers) -19210 | ITEM DETAILS |
| Optional part for use with SBC i-Color. One set per SBC i-Color. | $ 69.29 |
 | Blitz Wireless Remote Switch (Boost Controllers) -15042 | ITEM DETAILS |
| Option Part for Blitz SBC Type S/Type R. For scramble or HI/LOW boost channel switching. | DISCONTINUED |
 | HKS EVC (Old) (Boost Controllers) -45003-AK001 | ITEM DETAILS |
| 4th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
 | HKS EVC Black Limited (Boost Controllers) -45003-AK004 | ITEM DETAILS |
| 4th Generation Electronic Valve Controller. Limited Edition. Discontinued. | DISCONTINUED |
| HKS EVC Display Stand (Boost Controllers) -53002-AK001 | ITEM DETAILS |
| For use with display of HKS EVC. | $ 7.56 |
 | HKS EVC Easy Writer (Boost Controllers) -45999-AK026 | ITEM DETAILS |
| Computer connection kit for use with HKS EVC VI/EVC VI IR. Conveniently view and edit maps and settings. Not required for HKS EVC IR 2.4. Software available for download from HKS website. | $ 75.59 |
 | HKS EVC EZ II (Boost Controllers) -45003-AK002 | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | HKS EVC V (Boost Controllers) -45003-AK005 | ITEM DETAILS |
| 5th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
| HKS EVC V and Easy Writer Set (Boost Controllers) -45003-AK006 | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | HKS EVC VI (Boost Controllers) -45003-AK010 | ITEM DETAILS |
| 6th Generation Electronic Valve Controller. Featuring all new display and valve units for new functions. | DISCONTINUED |
| HKS EVC VI and Easy Writer Set (Boost Controllers) -45003-AK010 + 45999-AK026 | ITEM DETAILS |
| DISCONTINUED |
| HKS EVC VI-IR (Boost Controllers) -45003-AK011 | ITEM DETAILS |
| 2.2 inch full colour TFT screen. | DISCONTINUED |
 | HKS EVC VI-IR 2.4 (Boost Controllers) -45003-AK012 | ITEM DETAILS |
| 2.4 inch full colour TFT screen for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting. HKS boost setting tool EasyWriter can be easily connected. Basic performance as a boost controller is the same as EVC6-IR. - Correction map grid point : 10 x 10. - Pressure correction range : -180 - 180. - More precise correction is possible for modern smaller sized turbo. Monitor Navigation System easily leads the user to the correct setting and logging screens. The proven Stepping Motor is utilized as a valve unit. | DISCONTINUED |
 | HKS EVC VII (Boost Controllers) -45003-AK013 | ITEM DETAILS |
| 7th Generation Electronic Valve Controller. Featuring all new "HIPER ENGINE" CPU for even better boost control than previous models. | DISCONTINUED |
 | HKS EVC VII Option Parts (Boost Controllers) -45999-AK029 | ITEM DETAILS |
| Option/Repair parts for use with HKS EVC VII. | $ 22.55 |
 | HKS EVC VII-MR (Boost Controllers) -45003-AK016 | ITEM DETAILS |
| Revamped model of the high-end boost controller EVC VII. While retaining its wide range of functions, it now offers more precise control and improved response at high boost levels. | $ 408.18 |
 | HKS EVC-S (Boost Controllers) -45003-AK009 | ITEM DETAILS |
| DISCONTINUED |
 | HKS EVC-S2 (Boost Controllers) -45003-AK015 | ITEM DETAILS |
| The simple-to-operate boost controller EVC-S has evolved with a color LCD for excellent visibility. The display area is doubled compared to the previous EVC-S. A variety of displays that utilize dot displays enable intuitive operation and improve operability. Displays the function of each button during setup (button information display) and supports modification operations. Boost settings have been expanded from the previous 2 modes to 4 modes (Modes A to D) making it easy to select boost according to the conditions. New features include circuit mode and scramble mode (Controlled by switching between two of the four boost settings) (Scramble mode is switched according to the set time). Added overtime setting to warning function - Warning control will not start unless the warning value has exceeded a set time, so the range of adjustment for warning control has been expanded. The maximum control boost is 250kPa and supports a wide range of boost control. Inheriting the control logic of the EVC-S, which has excellent boost control, and expanding the range of settings by adding a sampling time setting. | $ 250.95 |
 | Power Enterprise Power Boost Controller (PBC) (Boost Controllers) -(GL)ELBCPREPBC-Black | ITEM DETAILS |
| DISCONTINUED |
| TRUST GReddy External Signal Harness (Boost Controllers) -15900544 | ITEM DETAILS |
| For use of Profec E-01. 2 pulse inputs, 2 linear inputs and 1 linear output. Discontinued. | DISCONTINUED |
| TRUST GReddy Pressure Sensor Share Harness (Boost Controllers) -15900543 | ITEM DETAILS |
| For use of Profec E-01 pressure sensor with e-Manage. | $ 10.23 |
 | TRUST GReddy Profec (Boost Controllers) -15500214 | ITEM DETAILS |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 264.96 |
 | TRUST GReddy PRofec B Spec. II (Boost Controllers) -15500209 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy PRofec E-01 (Boost Controllers) -15500207 | ITEM DETAILS |
| Can be used in conjunction with Trust e-Manage. | DISCONTINUED |
 | TRUST GReddy Profec Repair Parts (Boost Controllers) -15900011 | ITEM DETAILS |
| Repair /service part for Profec (OLED screen). | $ 10.25 |
 | TRUST GReddy PRofec TYPE-S (Boost Controllers) -15500211 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Profec White (Boost Controllers) -15500219 | ITEM DETAILS |
| Limited edition model with white display, buttons and dial. OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | DISCONTINUED |
 | TRUST GReddy Remote Switching System (Boost Controllers) -15500351 | ITEM DETAILS |
| For use with Gradis-9000, PRofec boost controllers. | DISCONTINUED |
 | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | ITEM DETAILS |
| Super Air Flow Converter II. | DISCONTINUED |
 | Blitz R-FIT (Engine Management) -15120 | ITEM DETAILS |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
 | HKS Flash Editor (Engine Management) -42015-AF102 | ITEM DETAILS |
| ECU Reflash tool for tuning beginners and professionals. ECU reflash via OBD II connection. Store standard ECU maps and up to three custom maps. Stock data can be read and written. Can save stock ECU data and 3 other custom data files. HKS produced data (Phase 1, Phase 2) is preinstalled. Data can be edited by F-CON dealer with Power Writer. One Flash Editor per vehicle (Not transferrable). | $ 340.15 |
| TRUST GReddy E-01 (Engine Management) -15500208 | ITEM DETAILS |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
 | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
| TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
| TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $ 26.33 |
 | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
| TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $ 26.33 |
| TRUST GReddy e-manage Ultimate Pressure Sensor Type II for Turbo (Engine Management) -16401306 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. -99~3.0kPa. | DISCONTINUED |
| TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. | $ 45.73 |
| TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $ 26.33 |
 | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | ITEM DETAILS |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
 | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | ITEM DETAILS |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $ 350.60 |
 | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | ITEM DETAILS |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $ 166.29 |
 | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | ITEM DETAILS |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
 | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | ITEM DETAILS |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
| Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | ITEM DETAILS |
| DISCONTINUED |
 | Billion VFC II (Other Controllers) -BVTW-03 | ITEM DETAILS |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $ 124.72 |
 | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | ITEM DETAILS |
| Variable Fan Controller PRO DD. | DISCONTINUED |
 | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | ITEM DETAILS |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $ 22.87 |
 | Blitz E-ESC (Other Controllers) -16087 | ITEM DETAILS |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
 | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | ITEM DETAILS |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | DISCONTINUED |
 | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | ITEM DETAILS |
| $ 73.45 |
 | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | ITEM DETAILS |
| $ 115.02 |
 | PIVOT 3-DRIVE BLP More Info (Other Controllers) -3-DRIVE-BLP | ITEM DETAILS |
| Throttle controller with built in manual transmission auto-blipping function. Auto-Blipping removes the need for the conventional heel and toe technique used to raise rpm with the accelerator while braking at the same time in an attempt to prevent slipping and turbulent motion caused by rapid downshifts when sports driving in manual transmission model cars. This allows the driver to concentrate more on braking which in turn results in a more accurate and smoother deceleration. Operation is safe, as the Auto-Blipping function does not operate when accelerating without braking, or when a set speed has not been reached. The controller has three throttle modes to match your driving style and conditions whether driving for sport, driving on slippery roads, or driving with gas efficiency in mind: Normal Mode for regular response, Sports Mode with 7 steps for a quicker response, and ECO Mode with 3 steps for a slower response. The choice is yours. | $ 181.73 |
 | PIVOT 3-DRIVE Brake Harness More Info (Other Controllers) -BR-3 | ITEM DETAILS |
| Option part for use with 3-DRIVE BLP for seamless bolt on installation. | $ 20.33 |
 | PIVOT 3-DRIVE Car Specialized Harness (Other Controllers) -TH-2A | ITEM DETAILS |
| Car specific harness, for bolt on installation of PIVOT 3-DRIVE throttle controllers. | $ 36.72 |
 | PIVOT 3-DRIVE Clutch Harness (Other Controllers) -MTC-8 | ITEM DETAILS |
| Option part for use with 3-DRIVE BLP for seamless bolt on installation. | $ 20.33 |
 | PIVOT 3-DRIVE Compact More Info (Other Controllers) -THC | ITEM DETAILS |
| High performance, low cost, all in a compact body. | DISCONTINUED |
 | PIVOT 3-DRIVE EVO (Other Controllers) -3DE | ITEM DETAILS |
| Throttle controller with no OBD Connection necessary! All-in-One design means most value for your money. Compatible with Collision Mitigation Systems and Euro Cars. Easy Connection to Accelerator Connector - Simplified wiring prevents signal malfunctions caused by decreased voltage due to low-current circuitry. Suitable for use with OBD connected products - With no need for a power connection to the OBD, it is possible to use other OBD connected products without a splitter connection. Compact Controller Provides discrete standard-style installation - The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. 17 Step / 4 Mode Wide-Range Adjustment The four modes include: POWER mode with 7 steps for increasing response across all ranges, RESPONSE mode with 5 steps for increasing response, like a wire throttle, in the lower and middle ranges, ECO mode with 5 steps for suppressing rapid acceleration to help increase gas mileage, and NORMAL mode for regular driving. | $ 128.88 |
 | PIVOT 3-DRIVE Extension Cable (Other Controllers) -THC-EC | ITEM DETAILS |
| 1m extension cable for 3-DRIVE Car Specialized Harnesses. For use with: PIVOT 3-DRIVE EVO, 3-DRIVE LIGHT, 3-DRIVE COMPACT and 3-DRIVE AC. | $ 15.24 |
 | PIVOT 3-DRIVE Flat More Info (Other Controllers) -THF2 | ITEM DETAILS |
| Ultra thin compact throttle controller for a sleek, clean look. | DISCONTINUED |
 | PIVOT 3-DRIVE PRO (Other Controllers) -3DP | ITEM DETAILS |
| Throttle controller with no OBD Connection necessary! Low-Profile Controller allows discrete installation. Compatible with Collision Mitigation Systems and Euro Cars. Easy Connection to Accelerator Connector - Simplified wiring prevents signal malfunctions caused by decreased voltage due to low-current circuitry. Suitable for use with OBD connected products - With no need for a power connection to the OBD, it is possible to use other OBD connected products without a splitter connection. Compact Controller Provides discrete standard-style installation - The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. 17 Step / 4 Mode Wide-Range Adjustment The four modes include: POWER mode with 7 steps for increasing response across all ranges, RESPONSE mode with 5 steps for increasing response, like a wire throttle, in the lower and middle ranges, ECO mode with 5 steps for suppressing rapid acceleration to help increase gas mileage, and NORMAL mode for regular driving. | $ 165.60 |
 | PIVOT 3-DRIVE X More Info (Other Controllers) -3-DRIVE-X | ITEM DETAILS |
| World's first throttle controller with multi monitor for display of engine parameters. | DISCONTINUED |
 | PIVOT Fan Control Gauge (Other Controllers) -FCG | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | PIVOT Super Temp Controller (Other Controllers) -STC | ITEM DETAILS |
| Fan controller with water or oil temperature display. | DISCONTINUED |
 | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | ITEM DETAILS |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $ 176.27 |
 | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Relay Kit (Other Controllers) -15901400 | ITEM DETAILS |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $ 18.68 |
 | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | ITEM DETAILS |
| DISCONTINUED |
| Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | ITEM DETAILS |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
| Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | ITEM DETAILS |
| For use with Okachan Water Temp oC. | DISCONTINUED |
| ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design Meter Stand (Performance Meters) -01-0106X-L | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design MFD (Performance Meters) -01-0003X-00 | ITEM DETAILS |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
 | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz MMD i-Color (Performance Meters) -15062 | ITEM DETAILS |
| Multi Function & Multi Angle Display. | DISCONTINUED |
 | Blitz Power Meter iD III (Performance Meters) -15086 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Touch-B.R.A.I.N. (Performance Meters) -15158 | ITEM DETAILS |
| OBD multi monitor that can display up to 50 items of vehicle information by simply connecting to the failure diagnosis connector (OBD). 3.5 inch touch panel type TFT liquid crystal adoption. It is also excellent in expandability. Simple install - simply connect to OBD part with connector. A variety of beautiful graphics. "Racing" emphasizing visibility, "3D" incorporating near future design - 56 kinds of rich display methods such as "Eco" to support econmical driving. For software version 1.30+, "TOYOTA HYBRID" exclusive communication is available - displays data specific to the hybrid vehicles that would not normally be available. Multi-angle display (left, vertical, right) screen switching. Special holder is included as standard equipment for various mounting positions. microSD card slot and USB port enables data linkage/software update with PC. Option features: - Data logging on USB memory/micro SD card, data analysis via Blitz DATA LOGGING SOFT (Free download). . Real time loggin is available with use of Blitz PC Link Cable - sold separately. By connecting Blitz Sensor Junction Box (sold separately), unit can display additional sensor data (sensors sold separately). Includes Universal Monitor Holder. | DISCONTINUED |
| Blitz Touch-B.R.A.I.N. Option Part (Performance Meters) -15162 | ITEM DETAILS |
| $ 16.63 |
 | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | ITEM DETAILS |
| DISCONTINUED |
 | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | ITEM DETAILS |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | $ 521.56 |
| HKS A/F Sensor (Performance Meters) -44999-AK022 | ITEM DETAILS |
| For use with HKS A/F Knock Amp 2/3. | $ 143.18 |
| HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | ITEM DETAILS |
| For use with HKS A/F Knock Amp 2/3. | $ 53.42 |
 | HKS CAC Cute (Performance Meters) -44007-AK002 | ITEM DETAILS |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | $ 168.94 |
 | HKS CAMP (Performance Meters) -4801-SA001 | ITEM DETAILS |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
 | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | ITEM DETAILS |
| DISCONTINUED |
| HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | ITEM DETAILS |
| $ 66.77 |
 | PIVOT PMC (Performance Meters) -PMC | ITEM DETAILS |
| Power Monitor. Acceleration time measurement (0-40, 0-60, 0-100km/h). Water temperature display. Oil pressure display. OBD 2 vehicles. | $ 82.04 |
 | PIVOT Speed Meter X (Performance Meters) -SML-X | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
| PIVOT Speed Meter Z (Performance Meters) -SML-Z | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | SARD A/F Device (Performance Meters) -67502 | ITEM DETAILS |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $ 611.13 |
| SARD A/F Device A/F Sensor (Performance Meters) -67519 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 311.80 |
| SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 112.25 |
| SARD A/F Device Sensor Fitting (Performance Meters) -67517 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 17.46 |
 | SARD Analyzer-II (Performance Meters) -67515 | ITEM DETAILS |
| DISCONTINUED |
 | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | ITEM DETAILS |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
 | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | ITEM DETAILS |
| For NA and Turbo. | DISCONTINUED |
 | Blitz ASTT-X (Turbo Timers) -14360 | ITEM DETAILS |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
 | Blitz DTT-DCIV (Turbo Timers) -14369 | ITEM DETAILS |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
 | Blitz DTT-X (Turbo Timers) -14362 | ITEM DETAILS |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
 | Blitz FATT Advance + (Turbo Timers) -15043 | ITEM DETAILS |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
 | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | ITEM DETAILS |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
 | Blitz FATT-DCIV (Turbo Timers) -14368 | ITEM DETAILS |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
 | Blitz FATT-X (Turbo Timers) -14361 | ITEM DETAILS |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
 | HKS Turbo Timer Harness Push Start (Turbo Timers) -41003-AF007 | ITEM DETAILS |
| Vehicle specific turbo timer Harness for HKS Turbo Timer Push Start type0. This harness makes connection and installation easy. For use with HKS Turbo Timer Push Start Type 0. | $ 30.74 |
 | HKS Turbo Timer Push Start Type 0 (Turbo Timers) -41001-AK011 | ITEM DETAILS |
| Turbo timer specifically designed for push start engine type vehicles. Timer Function: Manual 1 & 2 Mode (enables to set the after-idling time). Set time: 0～10mins (at the interval of 10 sec). Battery Voltage Indicator: Indication of the battery voltage, peak value, and warning function's ON/OFF status. Automatic Door Lock Function: The door is locked by Turbo Timer since the key-lock does not function during after-idling. This function is optional. Set time: 1~10 sec. (at the interval of 1 sec). The factory security system will not be activated after the after-idling. | DISCONTINUED |
 | HKS Turbo Timer Type 0 (Turbo Timers) -41001-AK009 | ITEM DETAILS |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: Red color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. | DISCONTINUED |
 | HKS Turbo Timer Type 0 (Old) (Turbo Timers) -4101-RA009 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Turbo Timer Type 1 (Turbo Timers) -41001-AK010 | ITEM DETAILS |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: White color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. Also able to display vehicle speed, engine rpm. Also features stopwatch and laptime functions. | DISCONTINUED |
 | HKS Turbo Timer Type 1 (Old) (Turbo Timers) -4101-RA011 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Turbo Timer X (Turbo Timers) -41001-AK012 | ITEM DETAILS |
| 10th generation HKS turbo timer boasts simplicity and high operability. Single button control and red LED numerical display simplify operation and improve visibility. 5 time ranges. Selectable between 1, 3, 5, 10, and 30 minutes (Maximum timer duration is 30 minutes). Accurate time duration can be selected by manual setting. Handbrake detective safety circuit. High capacity relay. Timer operation stops under unstable conditions caused by low voltage of battery, etc. Not suitable for push button start vehicles. | $ 66.01 |
 | PIVOT ATT (Turbo Timers) -ATT | ITEM DETAILS |
| Auto Turbo Timer. | DISCONTINUED |
 | PIVOT Flat-B (Turbo Timers) -ELTTPVGEN002 | ITEM DETAILS |
| Full Auto Turbo Timer. | DISCONTINUED |
 | PIVOT Full Auto Turbo Time e-timer (Turbo Timers) -ETT-B | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT SAT (Turbo Timers) -SAT | ITEM DETAILS |
| Security Auto Timer. | DISCONTINUED |
 | PIVOT Super Baby Timer (Turbo Timers) -ELTTPVGEN001 | ITEM DETAILS |
| Full Auto Turbo Timer. | DISCONTINUED |
 | PIVOT TTX (Turbo Timers) -TTX | ITEM DETAILS |
| Ultra compact design. | DISCONTINUED |
 | TRUST GReddy Full Auto Turbo Timer (Turbo Timers) -15500021 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Full Auto Turbo Timer II (Turbo Timers) -15500022 | ITEM DETAILS |
| Separate type. | DISCONTINUED |
Interior Parts
 | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | FET QRS III (Boss Kits) -FQS005 | ITEM DETAILS |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | $ 177.00 |
 | FET QRS III Steering Plate (Boss Kits) -FQS006 | ITEM DETAILS |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
 | HKS Q-Release WB Rapfix II Keylock Set (Boss Kits) -51007-AK721 | ITEM DETAILS |
| The Works Bell RAPFIX II KEYLOCK SET is now available in an HKS oil color. This set includes the RAPFIX II steering wheel detachment system, which provides the highest level of safety and convenience, born from the pursuit of speed, and the RAPFIX II KEYLOCK SYSTEM, which prevents vehicle theft and has an audible warning function. Comes with a cover for the key lock system to prevent scratches during storage and to prevent the key cylinder number from being read when installed. Steering boss kit to suit vehicle is required for installation (Sold separately). Vehicles with a steering angle sensor connector at 12 o'clock, such as the BNR32, cannot be used. Limited edition item. | $ 573.84 |
 | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | ITEM DETAILS |
| $ 16.38 |
 | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | ITEM DETAILS |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
 | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | ITEM DETAILS |
| For use with regular boss kits (sold separately). | DISCONTINUED |
 | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $ 238.17 |
 | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | ITEM DETAILS |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | $ 32.64 |
 | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $ 203.78 |
 | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $ 44.72 |
 | Works Bell Rapfix Flipper (Boss Kits) -103260 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.79 |
 | Works Bell Rapfix GTC (Boss Kits) -103270 | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $ 245.09 |
 | Works Bell Rapfix GTC-R (Boss Kits) -103282 | ITEM DETAILS |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $ 276.53 |
 | Works Bell Rapfix II (Boss Kits) -103030 | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 203.21 |
 | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | ITEM DETAILS |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | $ 120.31 |
 | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 231.87 |
 | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
 | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $ 157.70 |
 | Works Bell Rapfix Racing (Boss Kits) -103330 | ITEM DETAILS |
| Steering wheel quick release system for competition cars. | $ 208.50 |
 | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $ 309.28 |
 | Works Bell Wiring Plate (Boss Kits) -103284 | ITEM DETAILS |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $ 18.27 |
 | SARD RD-1 (Clusters and Cluster Gauges) -67520 | ITEM DETAILS |
| Racing Display 1. | DISCONTINUED |
 | STACK ST8100 (Clusters and Cluster Gauges) -67000 | ITEM DETAILS |
| DISCONTINUED |
 | STACK ST8130 (Clusters and Cluster Gauges) -67003 | ITEM DETAILS |
| DISCONTINUED |
| STACK ST8130P (Clusters and Cluster Gauges) -67002 | ITEM DETAILS |
| $ 1530.66 |
 | HKS Kansai Floor Mat (Floor Mats) -KYF025 | ITEM DETAILS |
| Thick anti flammability material (FMVSS NO.302 test compliant) cut into shape to suit each specific vehicle type. Equipped with hoook holes and anti slip backing. Right hand drive models only. Made in Japan. | $ 103.56 |
 | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | ITEM DETAILS |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $ 48.09 |
 | Blitz Meter Holder (Gauge Mounts) -19160 | ITEM DETAILS |
| $ 17.13 |
 | Blitz Racing Meter Panel (Gauge Mounts) -19167 | ITEM DETAILS |
| $ 260.78 |
 | Blitz Racing Meter Panel Meter Set (Gauge Mounts) -19169 | ITEM DETAILS |
| $ 555.57 |
 | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | ITEM DETAILS |
| On dash type. | $ 118.74 |
 | Defi Fitting Kit (Gauge Mounts) -DF05301 | ITEM DETAILS |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
 | HKS Display Stand (Gauge Mounts) -53002-AK001 | ITEM DETAILS |
| $ 11.97 |
| HKS Meter Cap (Gauge Mounts) -53002-AK002 | ITEM DETAILS |
| $ 8.00 |
 | HKS Meter Hood (Gauge Mounts) -5404-SA001 | ITEM DETAILS |
| $ 32.44 |
 | HKS Meter Stand (Gauge Mounts) -5404-SA006 | ITEM DETAILS |
| DISCONTINUED |
 | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | ITEM DETAILS |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
 | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | ITEM DETAILS |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
 | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | ITEM DETAILS |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
 | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | ITEM DETAILS |
| Meter not included. Includes double sided tape. | DISCONTINUED |
 | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | ITEM DETAILS |
| $ 95.49 |
 | Zero Sports Dual Meter Hood (Gauge Mounts) -0930021 | ITEM DETAILS |
| Holds 2 x 60mm gauges. | $ 189.91 |
 | Zero Sports Single Meter Hood (Gauge Mounts) -0930015 | ITEM DETAILS |
| Holds 1 x 60mm gauge. | $ 165.98 |
 | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | ITEM DETAILS |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
 | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | ITEM DETAILS |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
 | CUSCO Spin Turn Knob (Hand Brake Accessories) -692 014 AR | ITEM DETAILS |
| Push button to elminate hand brake lock and pull out to lock. Aluminium. | $ 18.39 |
 | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | ITEM DETAILS |
| $ 507.57 |
 | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | ITEM DETAILS |
| DISCONTINUED |
 | Project μ (Mu) Seat Belt Pad (Harnesses) -ACC-SP02 | ITEM DETAILS |
| These seat belt pads feature a zipper closure for easy attachment and reduce the pressure of the seat belt digging into the body. Pair of 2. | $ 48.25 |
 | SARD 4 Point Harness (Harnesses) -80221 | ITEM DETAILS |
| FIA-approved 4-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 233.38 |
 | SARD 6 Point Harness (Harnesses) -80223 | ITEM DETAILS |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 317.15 |
 | SARD GR Aero Stabilizing Shoulder Pad (Harnesses) -76013 | ITEM DETAILS |
| $ 29.61 |
 | SARD GR Racing Harness (6 Point) (Harnesses) -76023 | ITEM DETAILS |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. | $ 478.72 |
 | SPOON SPORTS Racing Harness (Harnesses) -ALL-81450-000 | ITEM DETAILS |
| $ 519.04 |
 | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | ITEM DETAILS |
| $ 110.55 |
 | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | ITEM DETAILS |
| $ 116.22 |
 | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | ITEM DETAILS |
| DISCONTINUED |
 | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 243.30 |
| TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 362.04 |
| TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | ITEM DETAILS |
| Set of 2. | $ 19.27 |
 | TAKATA FORMULA 6 (Harnesses) -73000-0 | ITEM DETAILS |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
 | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | ITEM DETAILS |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
 | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | ITEM DETAILS |
| 4 point harness. FIA Approved. | DISCONTINUED |
 | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | ITEM DETAILS |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
 | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | ITEM DETAILS |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
 | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | ITEM DETAILS |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
 | TAKATA RACE 2x2 (Harnesses) -94005-0 | ITEM DETAILS |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 484.71 |
 | TAKATA RACE 3x2 (Harnesses) -94004-0 | ITEM DETAILS |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 379.83 |
 | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
 | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | ITEM DETAILS |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $ 487.70 |
 | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | ITEM DETAILS |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-2 (Harnesses) -72000-0 | ITEM DETAILS |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | ITEM DETAILS |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-3 (Harnesses) -72004-0 | ITEM DETAILS |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | ITEM DETAILS |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA Shoulder Pads (Harnesses) -SP-301 | ITEM DETAILS |
| Pair. | DISCONTINUED |
 | TAKATA Stress Plate (Harnesses) -STP-01 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Shoulder Pad (Harnesses) -18001988 | ITEM DETAILS |
| Pair. | $ 21.10 |
 | TRUST GReddy Sports Harness (Harnesses) -16500004 | ITEM DETAILS |
| 4 x 4 point harness. | DISCONTINUED |
 | OKUYAMA CARBING Passenger Plate More Info (Other) -420 001 0 | ITEM DETAILS |
| 3mm aluminium. Attatched to floor carpet by velcro tape. | $ 108.15 |
 | STi Push Engine Switch (Other) -ST83031ST041 (Old: ST83031ST040) | ITEM DETAILS |
| Cherry red button, STi logo. | $ 96.69 |
 | STi Room Mirror Shield (Other) -STSG05100230 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO Sports Accel Pedal (Pedals) -965 766 A | ITEM DETAILS |
| $ 27.46 |
 | LAILE Beatrush Driver Foot Rest (Pedals) -S46020DR | ITEM DETAILS |
| In motor sports where intense Gs take place, a firmly, well planted left foot is a necessity. Anodized, drilled aluminium reduces chances of slipping. Pedal: Aluminium. Brackets: Steel. Right hand drive models only. | $ 29.73 |
 | NEOPLOT Accelerator Pedal NEO (Pedals) -NP70111 | ITEM DETAILS |
| $ 113.38 |
 | NEOPLOT Foot Rest Bar NEO (Pedals) -NP71210 | ITEM DETAILS |
| Adjustable foot position. Right hand drive models only. | $ 48.19 |
 | BRIDE FO Type Super Seat Rail (Seat Accessories) -F011FO | ITEM DETAILS |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA seats. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. | $ 101.78 |
 | BRIDE FX Type Super Seat Rail (Seat Accessories) -F011FX | ITEM DETAILS |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. Aluminium side brackets. Fixed type. FIA approved. | $ 146.14 |
 | BRIDE Import Side Stay (Seat Accessories) -A35NPO | ITEM DETAILS |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $ 45.70 |
 | BRIDE MO Type Super Seat Rail (Seat Accessories) -F011MO | ITEM DETAILS |
| For use with BRIDE reclinable seats. EUROSTER series, STREAMS series, DIGO series, ZAOU, edirb 032/054, edirb 110/132, EURO II series, BRIX (Old), ERGO (Old), XAX (Old), REVS. Also suitable for: - SPARCO - Star 2, Torino 2, Milano 2, Monza, Sportivo, Speed, Sprint. | $ 134.04 |
 | BRIDE RO Type Super Seat Rail (Seat Accessories) -F011RO | ITEM DETAILS |
| For use with BRIDE reclinable seats. GIAS series, STRADIA series, deirb 023/033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, PROS. Super Low Position (maximum -30mm). Also suitable for: - RECARO - SR series, L series. - GULL (Love Lark). - D&W. Also suitable for (with BRIDE Import Side Stay - Sold separately): - RECARO - SPG-N. - Sparco - Corsa, Rev II, Pro 2000, Evo. | $ 120.66 |
 | BRIDE Side Stay (Seat Accessories) -A02NPO | ITEM DETAILS |
| $ 32.31 |
 | BRIDE XL Type Super Seat Rail (Seat Accessories) -F011XL | ITEM DETAILS |
| For use with BRIDE ZIEG IV WIDE, ZETA III type-XL seats. Super low position (maximum -30mm). | $ 171.52 |
 | BRIDE XR Type Super Seat Rail (Seat Accessories) -F011XR | ITEM DETAILS |
| For use with BRIDE Stradia II Wide (Stradia II type-XL) seats. | $ 144.75 |
 | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Kansai Low Position Seat Rail (Seat Accessories) -KIF005 | ITEM DETAILS |
| Optimises seating position of standard seats. Compatible with seat lifter and/or other functions of the standard seats. | $ 193.69 |
 | RECARO Base Frame (Seat Accessories) -2086.087.2 | ITEM DETAILS |
| Seat rails. | $ 145.51 |
 | RECARO Offset Side Adapter Set (Seat Accessories) -1700001J | ITEM DETAILS |
| For use with RECARO Base Frame and full bucket seats. | $ 63.62 |
 | RECARO Side Protector (Seat Accessories) -7216966 | ITEM DETAILS |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $ 61.10 |
 | Prodrive Competition Seat (Seats) -55660011 | ITEM DETAILS |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
 | HKS Carbon Shift Knob (Shift Knobs) -51999-AF001 | ITEM DETAILS |
| $ 106.14 |
 | LAILE Beatrush Alumi Shift Knob Type-EBR (Shift Knobs) -A91212AB-EBR | ITEM DETAILS |
| Billet aluminium shift knob, with alumite finish. Approx 138g. | $ 43.27 |
 | LAILE Beatrush Alumi Shift Knob Type-Q50BR (Shift Knobs) -A91212AB-QBR2 | ITEM DETAILS |
| 50mm diameter round type, billet aluminium shift knob, with alumite finish. Approx 153g. | $ 35.90 |
 | LAILE Beatrush Alumi Shift Knob Type-QBR (Shift Knobs) -A91212AB-QBR | ITEM DETAILS |
| 45mm diameter round type, billet aluminium shift knob, with alumite finish. Approx 112g. | $ 36.47 |
 | LAILE Beatrush Duracon Shift Knob Type-QBR (Shift Knobs) -A91212B-QBR | ITEM DETAILS |
| 45mm diameter round type, duracon shift knob. Approx 60g. | $ 34.20 |
 | MOONFACE Super Lap Aluminium Shift Knob Ver I (Shift Knobs) -ONA03O | ITEM DETAILS |
| DISCONTINUED |
 | MOONFACE Super Lap Aluminium Shift Knob Ver II (Shift Knobs) -ONA03B | ITEM DETAILS |
| DISCONTINUED |
 | MOONFACE Super Lap Titanium Shift Knob Ver I (Shift Knobs) -ONT03O | ITEM DETAILS |
| DISCONTINUED |
 | MOONFACE Super Lap Titanium Shift Knob Ver I (Polish) (Shift Knobs) -ONT03PO | ITEM DETAILS |
| $ 163.21 |
 | MOONFACE Super Lap Titanium Shift Knob Ver II (Shift Knobs) -ONT03B | ITEM DETAILS |
| DISCONTINUED |
 | STi Shift Knob (Aluminum and Leather) (Shift Knobs) -ST35022ST130 | ITEM DETAILS |
| Aluminium. Dimpled leather. | DISCONTINUED |
 | STi Shift Knob (Duracon) (Shift Knobs) -ST35022ST272 (Old: ST35022ST270 ST35022ST271) | ITEM DETAILS |
| $ 62.36 |
 | STi Shift Knob (Leather) (Shift Knobs) -ST35022ST060 | ITEM DETAILS |
| Leather. | DISCONTINUED |
| Subaru STi Shift Knob (Aluminum and Leather) (Shift Knobs) -SG117AJ010 | ITEM DETAILS |
| Aluminium. Dimpled leather. | $ 98.64 |
| Subaru STi Shift Knob (Leather) (Shift Knobs) -SG117AJ015 | ITEM DETAILS |
| Leather. | $ 88.82 |
 | STi Gear Shift Lever Assembly (Shifter Kits) -ST35010ZR000 | ITEM DETAILS |
| Quick shift kit. | $ 186.45 |
 | Blitz Sports Steering Wheel (Steering Wheels) -13530 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO Racing Steering Wheel (Steering Wheels) -00B 763 A330 | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 299.83 |
 | DAMD Performance Steering Wheel More Info (Steering Wheels) -DPS358-D(L) | ITEM DETAILS |
| LED indicators and OLED monitor are located on the top of the steering wheel. Allows the driver to obtain information about your car without having to take your eyes off the wheel. In normal mode, you can display speed, engine speed, boost, intake air temperature, fuel efficiency, throttle angle, oil temperature, water temperature, outside temperature. In sport mode, you can display acceleration using its G sensor, and has added functions for sports driving such as a 0-40 mode stop watch and lap time (Requires Lap Time Sensor - Sold separately). Operation is very simple! Basically, switch function with the left button, and press and hold the left button to go to the setting screen. The right button is not used except when using settings or sports mode. Standard steering wheel mounted switches and horn are not included. | $ 690.69 |
 | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | ITEM DETAILS |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
 | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | ITEM DETAILS |
| D shape steering wheel. | $ 453.53 |
 | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | ITEM DETAILS |
| Round shape steering wheel. | $ 535.42 |
 | MOMO MOD.08 (Steering Wheels) -M-58 | ITEM DETAILS |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | $ 213.85 |
 | Nardi Personal Blitz (Steering Wheels) -P071 | ITEM DETAILS |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
 | Nardi Personal Blitz Leather (Steering Wheels) -P075 | ITEM DETAILS |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | $ 221.09 |
 | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | ITEM DETAILS |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 278.42 |
 | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | ITEM DETAILS |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 224.87 |
 | Nardi Personal Neo Grinta (Steering Wheels) -P024 | ITEM DETAILS |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | $ 267.71 |
 | Nardi Personal Pole Position (Steering Wheels) -P002 | ITEM DETAILS |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | $ 203.46 |
 | Nardi Classic Punching Leather (Steering Wheels) -N005 | ITEM DETAILS |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | $ 203.46 |
 | Nardi Classic Smooth Leather (Steering Wheels) -N111 | ITEM DETAILS |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | $ 278.42 |
 | Nardi Classic Suede Leather (Steering Wheels) -N115 | ITEM DETAILS |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | $ 203.46 |
 | Nardi Personal Trophy (Steering Wheels) -P051 | ITEM DETAILS |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | $ 240.94 |
 | PROVA Sports Steering Wheel (Steering Wheels) -94010DM0010 | ITEM DETAILS |
| This smaller diameter sports steering wheel improves driving feel and interior appearance while permitting use of the OEM airbag unit. The wheel is finished with high quality synthetic suede and alcantara in a grey and black pattern, with the Prova logo imprinted on the bottom spoke. | DISCONTINUED |
 | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | ITEM DETAILS |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
 | SARD Steering - D-shape (Steering Wheels) -80219 | ITEM DETAILS |
| 345 x 320 mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 310.54 |
 | SARD Steering - Semi Deep (Steering Wheels) -80227 | ITEM DETAILS |
| 345mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 359.04 |
 | TOMEI MOMO MOD.08 (Steering Wheels) -763034 | ITEM DETAILS |
| TOMEI x MOMO collaboration MOD.08 model steering wheel. The center mark is a chic grey, with the TOMEI logo embroidered on the spokes and the mark embroidered on the bottom of the grip. The included horn button also has a design unique to this collaboration. | $ 428.33 |
 | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | ITEM DETAILS |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 203.46 |
 | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | DISCONTINUED |
 | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | ITEM DETAILS |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | $ 348.02 |
 | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | ITEM DETAILS |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 294.48 |
 | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 267.71 |
 | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | ITEM DETAILS |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | $ 37.98 |
Intake Parts
 | Blitz Advance Power Cleaner More Info (Air Filters) -42138 | ITEM DETAILS |
| Superceding the BLITZ Sonic Power Cleaner, the new Blitz Advance Power Cleaner uses a stainless steel mesh filter that produces high inhalation efficiency and racy intake sound. Cooling shield with large diameter funnel shields radiant heat from the engine bay, preventing heat soak of the filter. By suppressing the rise in the temperature of the filter, high filling efficiency is maintainted providing a stable suction temperature. With the variable shield structure, it is possible to secure a large amount of air around the filter, and it is effective for instantaneous increase of intake air. Large diameter funnels efficiently supply a large amount of air, achieving high suction efficiency. Cooling shield made of aluminum, with blue anodized lock plate. | $ 327.55 |
 | Blitz Carbon Power Air Cleaner More Info (Air Filters) -35138 | ITEM DETAILS |
| Uses the highly acclaimed stainless mesh filter from SUS Power/Advance Power air cleaners. Conical body with "M" folds maximise the intake area, while balancing dust collecting ability with intake efficiency. The carbon shield deflects surrounding heat, preventing intake air temperature from rising. Being made from carbon, the shield itself emits very little heat. With proper care and maintenance, the stainless mesh filter can be used indefinitely. | $ 380.14 |
 | Blitz Carbon Suction Kit (Air Filters) -27008 | ITEM DETAILS |
| $ 645.02 |
 | Blitz SUS Power Air Cleaner More Info (Air Filters) -26138 | ITEM DETAILS |
| Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. | $ 250.39 |
 | Blitz SUS Power Core Type LM More Info (Air Filters) -56138 | ITEM DETAILS |
| Filter colour: blue. | $ 199.24 |
 | Blitz SUS Power Core Type LM Red More Info (Air Filters) -59138 | ITEM DETAILS |
| Filter colour: red. | $ 199.24 |
 | HKS Racing Suction (Air Filters) -70020-AF105 | ITEM DETAILS |
| The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits. To maximise intake capacity, HKS has carefully revised their HKS Racing Suction Reloaded for each car model, delivering the ultimate intake system to further increase the power. Filters use the new hyper stealth frame, where the opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. | $ 188.97 |
 | HKS Racing Suction Reloaded (Air Filters) -70020-AF010 | ITEM DETAILS |
| DISCONTINUED |
 | Apex APEXi Power Intake Filter More Info (Air Filters (Panel/OEM) Type) -503-F101 | ITEM DETAILS |
| Factory replacement filter featuring: Progressive-density filter element improves power and efficiency, without compromising ability to filter dust and dirt. Dry-type filter element requires no oiling, and will not foul air flow sensors. Ideal for light-tune cars, and cars that develop problems with idle and throttle response issues when the factory air box is removed. Easy intallation, cleaning, and maintenance. | $ 33.16 |
 | Blitz SUS Power Air Filter LM (Air Filters (Panel/OEM) Type) -SF-48B 59542 | ITEM DETAILS |
| Standard air filter replacement using dry type special fiber material (fabric) and mesh filter as used in proven SUS POWER core type air cleaners. Highly durable and strong due to the stainless steel coated material. In addition, the two layer structure reduces pressure loss, further improving suction efficiency while effective in collection of dust and other particles. | $ 26.80 |
 | HKS Super Air Filter More Info (Air Filters (Panel/OEM) Type) -70017-AF101 | ITEM DETAILS |
| New standard (stock) replacement type air filter utilizing newly developed dry non-woven fabric filter. High dust collection capacity and low resistance are implemented together at a high level. | $ 26.80 |
 | HKS Super Hybrid Filter More Info (Air Filters (Panel/OEM) Type) -70017-AF001 | ITEM DETAILS |
| 3 layered filter, with each layer serving a different function. Well balanced stock replacement type air cleaner for sporty quick engine response while being highly durable. | DISCONTINUED |
 | PROVA Sports Air Filter P2 (Air Filters (Panel/OEM) Type) -52000SP0011 | ITEM DETAILS |
| Utilizes an element material with reduced airflow resistance while maintaining adequate dust filtering. Through the pursuit of high filtering efficiency, overall air intake performance is improved. The filter element's dry cotton fiber and reinforced stainless mesh have been combined with strengthening the outer frame of the filter so that it will not deform under strong suction force, preventing unnecessary intake resistance. Since the filter is a dry type, there is no need to worry about filter oils damaging the mass air flow sensor. With overall dimensions identical to the factory part, installation is extremely simple. | $ 40.16 |
 | TRUST GReddy AIRINX GT (Air Filters (Panel/OEM) Type) -12562501 (SB-1GT) | ITEM DETAILS |
| High performance standard replacement (drop in) air cleaner/filter. Special high performance dry type fiber filter drastically improves intake efficiency. High rigidity and durability are achieved by using a steel net laminate structure. Rubber frame provides excellent sealing performance, keeping dust out. High performance and high quality, at a reasonable price. Direct swap for the genuine (stock) air filter, and can be easily replaced. | $ 31.53 |
 | ARC Super Blow Off Valve Flange (Blow Off Valves and Kits) -BOVNSDAAL | ITEM DETAILS |
| DISCONTINUED |
 | ARC Super Blow Off Valve Funnel (Blow Off Valves and Kits) -BOVNSF1 | ITEM DETAILS |
| DISCONTINUED |
 | ARC Super Blow Off Valve Gasket (Blow Off Valves and Kits) -BOVGK | ITEM DETAILS |
| DISCONTINUED |
 | ARC Super Blow Off Valve Type NS (Blow Off Valves and Kits) -BOV00NS4 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Super Sound Blow Off Valve BR (Blow Off Valves and Kits) -70681 | ITEM DETAILS |
| Vehicle specific kit. Super Sound Blow Off Valve BR (Blow Response). High quality aluminum die-cast body. High precision CNC machining optimizes the clearances, achieving smooth and responsive piston movement. The piston itself has a coating to improve corrosion resistance, as well as providing excellent lubrication performance even in tight clearances. Special black coating and anodized red highlights are resistant to corrosion and ideal for dressing up the engine room. Revision of the venturi design of the funnel has increased the flow rate by 17%, while creating a sharper, more powerful opening sound than the previous model. | $ 177.19 |
 | Blitz Super Sound Blow Off Valve VD Kit More Info (Blow Off Valves and Kits) -70181 | ITEM DETAILS |
| Vehicle specific kit. Venturi Drive valve. Employs the dual drive mechanism from the previous Super Sound Blow Off Valve DD. Funnel is venturi shaped to create sharp, dynamic sound. High quality die cast aluminium. Dissipates heat effectively through the ribs on the main body and funnel. 36mm big valve (with rubber) ensures sealing even in high boost applications. Piston is coated with special lubricating agent to prevent dirt/dust from damaging the piston. | DISCONTINUED |
 | Coto Sports TC Blow Off Valve (Blow Off Valves and Kits) -BOV-S03 | ITEM DETAILS |
| Heavy duty standard replacement blow off valve. Increased valve opening pressure results in response of the turbo is increased significantly, boost starting lower in the rpm range. As a result, the medium and low speed torque is increased. Being replacement of the standard blow off unit, engine stall/idling are not an issue. | $ 98.33 |
 | HKS Suction Return Kit (Blow Off Valves and Kits) -71002-AF002 | ITEM DETAILS |
| Optional kit to convert Super SQV Kits (Sold separately) to recirculating type. Allows the exhaust air to be returned to the suction, just like the standard air bypass valve. | $ 24.44 |
 | HKS Super SQV IV Black Edition Kit More Info (Blow Off Valves and Kits) -71008-AF013VB | ITEM DETAILS |
| HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support modern turbocharged vehicles. Semi-glossy black paint is applied to the body and upper part, crystal black paint is applied to the funnel part to create a high-quality and calm visual finish. | $ 164.40 |
 | HKS Super SQV IV Kit More Info (Blow Off Valves and Kits) -71008-AF013 | ITEM DETAILS |
| HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support modern turbocharged vehicles. | $ 140.78 |
 | PROVA High Pressure Bypass Valve 220 (Blow Off Valves and Kits) -50220AH0010 | ITEM DETAILS |
| HP bypass valve. Features a higher spring rate than the OEM part and is constructed to be extremely durable. With a valve opening pressure approximately 20% greater than standard, turbo response is improved while preventing the problems associated with using an atmospheric blow off valve on a mass airflow sensor equipped vehicle. Black alumite finish makes it an excellent dress-up part for the engine bay. | DISCONTINUED |
 | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Blow Off Valve Type FV More Info (Blow Off Valves and Kits) -11501665 | ITEM DETAILS |
| Universal. Blow off valve unit only. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. Compatiable with standard 2-bolt GReddy BOV flanges and Type-RZ outlet adapters. | DISCONTINUED |
 | TRUST GReddy Blow Off Valve Type FV2 (Blow Off Valves and Kits) -11501672 | ITEM DETAILS |
| Universal. Blow off valve unit only. GReddy Blow Off Valve FV2 inherits the floating valve structure that was popular in the previous model, while being improved with a more sophisticated design providing better maintainability and reliability. A fidget spinner is used to adjust the spring preload without tools and the hose union direction of the top cover can be adjusted 360° without tools. Can directly replace GReddy Blow Off Valve Type RS, RZ, and FV as the mounting flange and opening have the same dimensions. | $ 164.88 |
 | TRUST GReddy Blow Off Valve Type R More Info (Blow Off Valves and Kits) -11501660 | ITEM DETAILS |
| Universal. Blow off valve unit only. | $ 152.37 |
 | HKS Kansai Carbon Air Duct (Induction Boxes and Ducts) -KPF030 | ITEM DETAILS |
| Air duct only. | $ 395.26 |
| HKS Kansai Racing Suction R and Carbon Air Duct Set (Induction Boxes and Ducts) -KPF031 | ITEM DETAILS |
| HKS Racing Suction Kit and Carbon Air Duct Set. | $ 610.69 |
 | PROVA Carbon Intake Duct (Induction Boxes and Ducts) -50130TR0000 | ITEM DETAILS |
| Carbon fiber/fiberglass intake duct replaces the OEM unit and features a wider inlet and smoother internal features for improved airflow. As it uses the same mounting points as the original unit, installation is simple. The beautiful carbon fiber also serves as an accent to any performance engine bay. | $ 264.56 |
 | PROVA Cold-Flow Intake Box (Induction Boxes and Ducts) -53130EY0100 | ITEM DETAILS |
| Cold-flow Intake Air Box replaces the OEM unit, allows for colder and smoother air flow to engine for improved performance. It is a large capacity box-shaped filter case integrating filter case and resonator. The opening is also provided inside the fender. Realize sporty engine sound and response. As it uses the same mounting points as the original unit, installation is easy. | $ 238.17 |
 | SYMS Air Induction Box (Induction Boxes and Ducts) -Y2000EG002 | ITEM DETAILS |
| $ 507.07 |
 | Zero Sports Direct Flow System Box (Induction Boxes and Ducts) -0412301 | ITEM DETAILS |
| $ 432.80 |
 | HKS Carbon Suction Kit (Piping) -70026-AF001 | ITEM DETAILS |
| Greater intake efficiency combined with the high tensile strength and weight benefits of carbon fibre. Matte finish. | $ 368.49 |
 | TOMEI Elbow Adapter (Piping) -452001 | ITEM DETAILS |
| For use with TOMEI Turbo Suction Hose Kits without Elbow Adapter. | $ 49.45 |
 | TOMEI Turbo Suction Hose (Piping) -451011 | ITEM DETAILS |
| Specifically designed to reduce the restriction of the intake airflow to the turbo, which improves response and achieves increased power gains. The silicone reinforced structural design prevents the deformation of the hose while under high pressure loads. This also increases durability and reliability whilst optimizing the turbos performance. | $ 197.00 |
 | Zero Sports Air Intake Pipe (Piping) -0413005 | ITEM DETAILS |
| $ 100.15 |
Exterior Parts
 | HKS Metal Catalyzer (Catalytic Converters / Straight Pipes) -33005-AF014 | ITEM DETAILS |
| Normally at conflict with each other, catalytic converter that achieves high engine output and high emissions standards. Target horsepower: 500~600PS. 150 cell (Except some types). 0.1mm thick fins for better durability. | $ 1067.68 |
 | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | ITEM DETAILS |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | DISCONTINUED |
 | SARD Sports Catalyzer (Catalytic Converters / Straight Pipes) -89403 | ITEM DETAILS |
| Sports catalytic converter for high power and high response. Vehicle specific models feature either a 200/180cpsi large metal honeycomb structure cell (withstands 1200°C, made in Japan), heat plate (shield) precision welded into a unit designed to replace the standard unit. | $ 806.27 |
 | SYMS FSC Twin Cata Pipe (Catalytic Converters / Straight Pipes) -Y0800GV003 | ITEM DETAILS |
| Flow stability chamber, twin catalytic converter front pipe. | DISCONTINUED |
 | Real Speed Engineering Full Titan Muffler (Exhaust Systems (Cat Back)) -RB6090-SB01D | ITEM DETAILS |
| Full titanium exhaust. | $ 839.03 |
 | TOMEI EXPreme Ti Titanium Muffler (Exhaust Systems (Cat Back)) -441013 (Old: 440016) | ITEM DETAILS |
| High quality production, for true competition use without any compromises. Only the best grade titanium used. TOMEI have poured their vast exhaust knowledge into the these systems, from the special racing layout design (made as straight as possible) through to the high flow silencer. The EXPREME Ti systems are unrivaled in terms of performance and price. | $ 1122.48 |
Cooling Parts
 | Apex APEXi GT Spec Reserve Tank (Breather Tanks) -573-A001 | ITEM DETAILS |
| The GT Reservoir Tank is manufactured with the highest quality fabrication. When setup correctly, the hand welded aluminum tank is not just a reservoir but serves as an air separation tank with built-in partitions. Each tank includes its own APEX reservoir cap, as well as all appropriate hoses and hardware for ease of installation. | DISCONTINUED |
 | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | ITEM DETAILS |
| DISCONTINUED |
 | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | ITEM DETAILS |
| DISCONTINUED |
 | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | ITEM DETAILS |
| DISCONTINUED |
 | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | ITEM DETAILS |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $ 38.99 |
 | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | ITEM DETAILS |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $ 210.76 |
 | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | ITEM DETAILS |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
 | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | ITEM DETAILS |
| $ 13.04 |
 | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | ITEM DETAILS |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $ 10.68 |
 | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | ITEM DETAILS |
| Universal gear oil cooler kit. | $ 792.41 |
 | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | ITEM DETAILS |
| Universal differential oil cooler kit. | $ 776.35 |
 | Zero Sports Cool Action II (Ducts and Ducting) -0306041 | ITEM DETAILS |
| When the intake air temperature is high, the expansion coefficient of air increases, making it impossible to create an ideal combustion environment, which leads directly to less power. Therefore turbo cars are equipped with an intercooler to cool the intake air. However, if the intercooler core only receives half the incoming air, its performance will greatly reduced. Zero Sports developed Cool Action II for the purpose of fully exploiting the performance of the intercooler. The air flowing from the hood duct (front bonnet duct) is guided evenly over the entire intercooler core. As a result, intake air temp is lowered, bringing it closer to the ideal combustion environment, so that bringing out engine performance. | $ 157.00 |
 | Zero Sports Intercooler Guide (Ducts and Ducting) -0306058 | ITEM DETAILS |
| $ 102.86 |
 | Blitz Intercooler SE Kit (Intercoolers) -23117 | ITEM DETAILS |
| Standard Edition. Fully polished aluminium piping (Excluding some models and parts). Heat resistant and durable blue 3 ply silicone joint hoses. Aluminium pipe layout designed with as few bends as possible, reducing weight and pressure loss. Core features offset inner tubes, and louver type outer fins. | $ 650.06 |
 | Blitz Racing Oil Cooler BR (Oil Coolers) -10480 (Old: 10460) | ITEM DETAILS |
| Black power coated core. Fittings: red/black alumite. Nylon stainless mesh hoses. Internal thermostat attachment. | $ 369.63 |
 | Blitz Racing Oil Cooler Kit RD (Oil Coolers) -10260 | ITEM DETAILS |
| DISCONTINUED |
| Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | ITEM DETAILS |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
 | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | ITEM DETAILS |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $ 23.56 |
 | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | ITEM DETAILS |
| 1 piece. | DISCONTINUED |
| ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | ITEM DETAILS |
| 1 piece. | DISCONTINUED |
 | TRUST Gear Oil Pump (Other) -12004820 | ITEM DETAILS |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $ 257.00 |
 | TRUST GReddy Washer Tank (Other) -13506101 | ITEM DETAILS |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | $ 28.35 |
 | Apex APEXi GT-Spec Radiator Cap (Radiator Caps) -591-A001 | ITEM DETAILS |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
 | HKS Radiator Cap More Info (Radiator Caps) -15009-AK004 | ITEM DETAILS |
| Silicone rubber seal improves sealing properties. This radiator cap can support the reliable cooling performance under severe driving conditions. | $ 19.72 |
 | PROVA Sports Radiator Cap (Radiator Caps) -10000SP0021 | ITEM DETAILS |
| This performance radiator cap has its valve pressure set at 127kPa, ensuring the cooling system's maximum performance. By raising the coolant pressure, the coolant's boiling point is raised above that achieved with the standard cap. This gives more headroom in the coolant system under extreme conditions before boiling, which severely hinders cooling ability. The use of corrosion resistant stainless steel and heat resistant soft silicone for the inner passage seal improves sealing performance, resulting in both high durability and performance. Featuring a pressure valve spring made to a tolerance of +/- 0.1kg/cm2, this is a replacement pressure cap with high precision and quality. | $ 18.27 |
 | PROVA Sports Radiator Cap (Old Version) (Radiator Caps) -10000SP0020 | ITEM DETAILS |
| This performance radiator cap has its valve pressure set at 127kPa, ensuring the cooling system's maximum performance. By raising the coolant pressure, the coolant's boiling point is raised above that achieved with the standard cap. This gives more headroom in the coolant system under extreme conditions before boiling, which severely hinders cooling ability. The use of corrosion resistant stainless steel and heat resistant soft silicone for the inner passage seal improves sealing performance, resulting in both high durability and performance. Featuring a pressure valve spring made to a tolerance of +/- 0.1kg/cm2, this is a replacement pressure cap with high precision and quality. | DISCONTINUED |
 | TRUST GReddy Radiator Cap (Radiator Caps) -13901002 | ITEM DETAILS |
| The TRUST Greddy High Pressure Radiator Cap raises the boiling point by increasing the opening pressure of the main pressure valve compared to the standard cap. The temperature difference compared to the external temperature is increased reducing chances of overheating while improving cooling effect. 1.3 kg/cm2 (127kPa). Rust-resistant stainless steel body. Silicon rubber seal which is superior in heat and corrosion resistance. Made in Japan. | $ 19.53 |
 | TRUST GReddy Radiator Cap (Old) (Radiator Caps) -13901000 | ITEM DETAILS |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
 | Zero Sports Radiator Cap (Radiator Caps) -0308005 | ITEM DETAILS |
| The pressure in the radiator coolant channel is adjusted appropriately to raise the boiling point of the coolant. This makes it difficult for the coolant to boil and prevents the generation of air bubbles at high temperatures, leading to an increase in cooling efficiency. | $ 27.37 |
 | LAILE Beatrush Radiator Cooling Panel (Radiator Shrouds (Hoods)) -S146020RP | ITEM DETAILS |
| Aluminium (Thickness 1.2mm). | $ 68.22 |
 | Blitz Racing Radiator Type ZS (Radiators) -18863 | ITEM DETAILS |
| All polished aluminium model. 42mm wide (2 core). - Low cost, lightweight, all aluminium radiator. Possible by new manufacturing method. - 42mm thick core and large tanks makes for substantial increase in cooling capacity. Designed for use with standard electic fans and shrouds (some models may require some modifications for fitting). - Polished finish on tanks. - 1/8PT sensor attachment hole. - New type outer fin enhances heat dissipation. - Designed specifically for each vehicle type, with optimised tube pitch (angle). - Anodised drain bolt and BLITZ radiator cap are included. | $ 326.79 |
 | Daiwa Racing Labo Radiator (Radiators) -DRLRA000040 | ITEM DETAILS |
| $ 958.08 |
 | HKS Kansai Aluminium Radiator (Radiators) -KWF404 | ITEM DETAILS |
| All aluminum radiator. Includes Kansai Service radiator cap (127kPa). | DISCONTINUED |
 | PROVA Composit Radiator 40 (Radiators) -12600DR4160 | ITEM DETAILS |
| Full aluminium composite radiator with built-in oil cooler for high performance use. Built-in oil cooler line based on the sports radiator that enhance heat dissipation efficiency (cooling) without increasing the size of the core. Prevents overcooling and stabilizes engine temperature. | $ 1562.15 |
 | PROVA Sport Radiator 40 (Radiators) -10600DR4000 | ITEM DETAILS |
| Aluminum sports radiator. Using 36mm thick micro-pitch tube, these sports aluminum radiators can enhance heat dissipation efficiency (cooling) without increasing the size of the core. | $ 796.19 |
 | SARD Racing Radiator (Radiators) -29055 | ITEM DETAILS |
| Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. | DISCONTINUED |
 | SARD Racing Radiator and Cooling Thermo Set (Radiators) -29055 + 19408 | ITEM DETAILS |
| Limited time special campaign radiator and thermostat set. SARD Racing Radiator: Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. SARD Cooling Thermo: Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | DISCONTINUED |
 | TRUST GReddy Aluminium Radiator TW-R (Radiators) -12063801 | ITEM DETAILS |
| 2 core wide tube design provides the same capacity as conventional 3 core designs. Cooling water capacity is more than twice standard, with greater flow. Weight is kept low due to the all aluminium construction. Suitable for street and circuit use. 1/8PT sensor boss. Polished tanks. | $ 306.13 |
 | SARD Reserve Tank (Reserve Tanks) -29700 | ITEM DETAILS |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $ 91.97 |
 | Billion Super Thermo (Thermostats) -BSSU-30 | ITEM DETAILS |
| Low temp thermostat. Suppresses over heating and loss of power by maintaining optimum engine water temperature. This low temp thermostat that opens approx 10~20°C (Depending on application) earlier than the standard thermostat. | $ 44.41 |
 | SARD Cooling Thermo (Thermostats) -19408 | ITEM DETAILS |
| Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | $ 42.20 |
 | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | ITEM DETAILS |
| Universal transmission oil cooler kit. | $ 829.89 |
 | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | ITEM DETAILS |
| Universal compact transmission oil/power steering fluid cooler. | $ 321.25 |
 | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. | $ 524.71 |
Engine Parts
 | Advance High Efficiency Alternator (Alternators) -HE130-012S-GunMetal | ITEM DETAILS |
| High power, low resistance, highly efficient 3 layer coil. 1. Ultra lightweight duralumin pulley. 2. Car specific alternator cases. 3. Mitsubishi/9G 3 layer stator coil. 4. Mitsubishi IC regulator. | $ 442.16 |
 | RH9 150A NEW Hiper Alternator (Alternators) -(GL)ENALRH9-HYPALT-17 | ITEM DETAILS |
| 150A / 12V. Mitsubishi/9G 3 layer stator coil. Lightweight duralumin pulley | $ 592.74 |
 | TOMEI Competition Bearing (Conrod) More Info (Bearings) -127400 | ITEM DETAILS |
| Upper and lower set. | $ 21.01 |
 | TOMEI Competition Bearing (Main) More Info (Bearings) -126400 | ITEM DETAILS |
| Upper and lower set. | $ 21.01 |
 | Apex APEXi STB Heavy Duty Timing Belt (Belts and Chains) -818-F001 | ITEM DETAILS |
| Sports tuning belt. | $ 117.79 |
 | HKS Fine Tune Timing Belt (Belts and Chains) -24999-AF001 | ITEM DETAILS |
| Designed for use with HKS Slide Cam-Pullies (Sold separately), these belts are optimized for each engine type. Ideal for high power/high rpm applications. Designed to allow stable belt extension even when heat expansion occurs in the engine. Correctly shaped belt teeth reduces chances of slipping in high torque engines at lower belt tension, therefore not compromising belt strength. Teeth rubber are made from H-NBR grade rubber for additional strength. * Materials and/or molding method may vary sightly depending on application. | $ 118.93 |
 | HKS Fine Tune V Belt (Belts and Chains) -24996-AK013 | ITEM DETAILS |
| Using the latest in belt technology, these belts maintain engine condition, while improving engine room appearance. Increased durability at high temperatures which can be found in the engine bay of tuned vehicles. Increased performance in cold weather conditions. Lightweight and good friction tolerance properties, mean that excess tension is not required, while anti-sound properties reduces belt squeal. EPDM (Ethylene Propylene Diene Monomer) Rubber is used in the manufacture of these belts because of: - Better durability and performance in hotter or colder conditions with improved friction tolerance. - Much lighter than previous version of belt. - Short fiber mixture in rib rubber improves the performance over previous version. Compared to standard belts: High temperature durability: 4 times greater. Low temperature durability: 10 times greater. Abrasion resistance: 30% improved. Weight: 17% lighter. Noise: Less. | $ 27.09 |
 | STi V Belt (Belts and Chains) -ST08092ST000 | ITEM DETAILS |
| Heavy duty type. Greater extreme temperature tolerance (-35~85°C). | $ 24.88 |
 | TODA High Power Timing Belt (Belts and Chains) -06141-EJ2-000 | ITEM DETAILS |
| The additional stresses placed on the original OEM timing belt are considerable when using up-rated valve springs and high lift camshafts in more arduous sports driving conditions. These additional stresses lead to, among other things increased stretch degradation resulting in inaccurate valve timing as well as reduced durability. TODA High Power Timing Belts are designed from high quality materials to give improved durability as well as reduced stretch degradation. Compared to standard belts: Resistance to cutting: approx. 3.5~4 times. Heat resistance: approx. 2.5~3 times. Tooth integrity: approx. 3~4 times. Resistance to abrasion: approx. 2.5 ~ 3 times. | $ 108.97 |
 | JUN Strengthened Valve Guide (Camshaft and Valvetrain Parts) -1008M-F001 | ITEM DETAILS |
| Heavy duty racing valve guide set. | $ 156.85 |
 | TOMEI Bery Ring Set (Camshaft and Valvetrain Parts) -162010 | ITEM DETAILS |
| Beryllium(BeCu) seat ring set. The function of which valve seat is maintaining air tightness with the valve and resistance against wear. In high rotation and high load engine applications, the cooling performance of a valve seat becomes very important as it relates to engine output. When engine is high rotation and high load, it is impossible to achieve high output from the engine if cooling performance of the cylinder is low and knock limit does not become high, since the temperature of the circumference of a cylinder head rises unusually. In racing engines that temperature needed to be carefully controlled, how much you can cool the circumference of the seat ring becomes an important issue, and the technique of using high heat conduction metal, such as copper for seat ring, has been taken. Copper has one of the highest thermal conductivities through all metal that enables receiving heat from cylinder and cool it down quickly by transmit the heat to the cylinder head (Degree of heat conduction: 1.silver, 2.copper, 3.gold, 4.aluminium, ... 10. cast iron - STD). We select beryllium copper alloy (BeCu) that can secure mechanical intensity most in the copper alloy, which has ideal fatigue resistance and wear resistance while securing a preeminent cylinder cooling performance. | $ 351.48 |
 | TOMEI Oversized Valves (Camshaft and Valvetrain Parts) -163411 | ITEM DETAILS |
| 1mm oversized valve set. Requires seat cutting for fitting. | $ 334.10 |
| TOMEI Oversized Valves (Old Version) (Camshaft and Valvetrain Parts) -163403 | ITEM DETAILS |
| 1mm oversized valve set. Requires seat cutting for fitting. | DISCONTINUED |
 | TOMEI Titanium Valve Spring Retainers (Camshaft and Valvetrain Parts) -163203 | ITEM DETAILS |
| Special surface treated, improved durability and life. Controls and stabilises valve jumps and bounces. An indispensable part for any high powered, high speed engine. The combination of high lift camshafts and these oversized valves will greatly increase the flow rate for fuel mixture to enter the combustion chamber. When upgrading the valves to cope with the new high lift camshafts it is also a requirement to upgrade the valve springs to suit the new setup. High engine speeds and the dynamic movement of the valve trains mass can cause unwanted stress loads. This can cause abnormal movements such as a valve jump or valve bounce which can cause engine failure. These TOMEI retainers are made from titanium alloy for added weight reduction whilst maintaining the high strength properties and precision required for the nature of its use. This will help keeping the valves under control and secure the valve in place during extreme race conditions. | $ 308.40 |
 | TOMEI Valve Guide (Camshaft and Valvetrain Parts) -161300 | ITEM DETAILS |
| Phosphor bronze (PBB). | $ 19.71 |
| TOMEI Valve Guide Set (Camshaft and Valvetrain Parts) -163300 | ITEM DETAILS |
| Phosphor bronze (PBB). | $ 164.59 |
 | TOMEI Valve Spring Seats (Camshaft and Valvetrain Parts) -162007 | ITEM DETAILS |
| When installing aftermarket valve springs in a head assembly, the amount of load applied to each spring need to be adjusted until everything is in uniform specification. This is a standard procedure which all race engines go through in order to be able to raise the engine RPM without any glitches or hesitation. The standard method involved when putting together the valve assembly is to fully balance all the added components to tighter clearances than the manufacturer specifications. This method called “blueprinting” can be time consuming and a very costly service performed by an experienced engine builder. By utilizing the various thickness of the spring sheets to adjust to each and different spring rate load, the same objective can be satisfied with fraction of the cost. | $ 13.97 |
 | TOMEI Valve Springs (Camshaft and Valvetrain Parts) -163057 (Old: 163027) | ITEM DETAILS |
| $ 146.45 |
 | TOMEI PROCAM Camshaft (Camshafts and Camshaft Kits) -142209 | ITEM DETAILS |
| $ 397.40 |
 | TOMEI PONCAM Camshaft Kit (Camshafts and Camshaft Kits) -143070 | ITEM DETAILS |
| PONCAM Intake and exhaust camshafts. | $ 782.34 |
 | TODA I Section Heavy Duty Conrods More Info (Connecting Rods and Parts) -13210-EJ2-5T0-I x 4 | ITEM DETAILS |
$ 1070.83 |
 | TOMEI Forged H-Beam Conrod Kit (Connecting Rods and Parts) -125008 | ITEM DETAILS |
| $ 471.17 |
 | CUSCO Belt Cover (Covers) -692 730 A | ITEM DETAILS |
| $ 60.79 |
 | CUSCO Clear Timing Belt Cover (Covers) -6A1 039 A | ITEM DETAILS |
| DISCONTINUED |
 | LAILE Beatrush Pulley Cover (Covers) -S146020PCD | ITEM DETAILS |
| Aluminium. | $ 41.45 |
 | LAILE Beatrush Titanium Pulley Cover (Covers) -S146020PCV | ITEM DETAILS |
| Titanium. | $ 156.85 |
 | Zero Sports Belt Protector (Covers) -0199045 | ITEM DETAILS |
| $ 57.51 |
 | Zero Sports Solenoid Cover (Covers) -0199052 | ITEM DETAILS |
| Standard boost solenoid cover. | DISCONTINUED |
 | TOMEI EJ22 Forged Billet 4 Counter Weight Crankshaft (Crankshafts) -121034 | ITEM DETAILS |
| DISCONTINUED |
 | TOMEI EJ22 Forged Full Counter Weight Crankshaft (Crankshafts) -121033 | ITEM DETAILS |
| DISCONTINUED |
 | TOMEI EJ22/EJ25 Billet Crankshaft (Crankshafts) -121056 | ITEM DETAILS |
| $ 1700.73 |
 | CUSCO Heavy Duty Engine Mounts (Engine Mounts) -660 911 SET | ITEM DETAILS |
| Include brackets. | $ 149.41 |
 | CUSCO Heavy Duty Pitching Stopper (Engine Mounts) -6A1 911 PS | ITEM DETAILS |
| Suppresses the forwards and backwards movement of the engine and transmission assembly, improving traction. High quality billet aluminium with metal collar (Engine side, press fitted), and rubber bush (Body/bulkhead side, press fitted). | $ 58.71 |
 | TOMEI Complete Block (Engine, Head and Short Block Assemblies) -214311 | ITEM DETAILS |
| $ 5354.15 |
 | TOMEI Complete Head (Engine, Head and Short Block Assemblies) -234022 | ITEM DETAILS |
| Complete engine head assembly for high rpm and power output. | $ 3889.63 |
 | Real Speed Engineering Exhaust Manifold (Exhaust Manifolds (Turbo)) -RB6010-SB01A | ITEM DETAILS |
| $ 748.32 |
 | TOMEI EXPreme Exhaust Manifold (Exhaust Manifolds (Turbo)) -414001 | ITEM DETAILS |
| $ 782.34 |
 | Blitz Fuel Pump (Fuel Pumps) -31255 | ITEM DETAILS |
| DISCONTINUED |
 | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | ITEM DETAILS |
| DISCONTINUED |
 | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | ITEM DETAILS |
| DISCONTINUED |
| SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | ITEM DETAILS |
| DISCONTINUED |
| SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | ITEM DETAILS |
| DISCONTINUED |
 | SARD Fuel Filter (Fuel Pumps) -58254 | ITEM DETAILS |
| $ 4.03 |
 | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | ITEM DETAILS |
| $ 194.32 |
 | SARD Fuel Pump Kit (Fuel Pumps) -58236 | ITEM DETAILS |
| Car specific fuel pump kit. | $ 183.62 |
 | SARD Pump Harness Kit (Fuel Pumps) -58253 | ITEM DETAILS |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $ 55.12 |
 | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | ITEM DETAILS |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | $ 225.82 |
 | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | ITEM DETAILS |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $ 90.58 |
 | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | ITEM DETAILS |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
 | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | ITEM DETAILS |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $ 81.89 |
 | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | ITEM DETAILS |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $ 156.85 |
 | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | ITEM DETAILS |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $ 40.44 |
 | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | ITEM DETAILS |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
 | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | ITEM DETAILS |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 118.11 |
 | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | ITEM DETAILS |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 92.60 |
 | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | ITEM DETAILS |
| $ 283.46 |
 | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | ITEM DETAILS |
| Mount bracket. | $ 32.88 |
 | TOMEI Engine Overhaul Kit (Gaskets) -1964293071 | ITEM DETAILS |
| TOMEI Head Gaskets, timing belt, timing belt guide, oil filler cap and all gaskets and seals required for an engine overhaul service. | $ 913.98 |
 | TRUST GReddy Titanium Turbo Blanket (Heat Shields and Heat Wrap (Bandages)) -11900537 | ITEM DETAILS |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. | $ 112.94 |
 | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | ITEM DETAILS |
| Voltage stabiliser and earthing system. | DISCONTINUED |
 | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | ITEM DETAILS |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
 | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | ITEM DETAILS |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
 | CUSCO Direct Ignition Coils (Ignition System Parts) -6A1 748 A | ITEM DETAILS |
| Heavy duty standard replacement direct ignition coil set. Provides stable spark in high boost/high rpm applications. | $ 396.21 |
 | CUSCO Direct Ignition Coils (Old Version) (Ignition System Parts) -00B 728 F4 | ITEM DETAILS |
| Heavy duty standard replacement direct ignition coil set. Provides stable spark in high boost/high rpm applications. | DISCONTINUED |
 | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | ITEM DETAILS |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $ 91.59 |
 | HKS Super Fire Racing Coil (Ignition System Parts) -43005-AF001 | ITEM DETAILS |
| Ignition coils with improved ignition energy. Increased ignition energy improves flame kernel formation and its growth, increasing flame propagation and engine combustion efficiency. Combustion is improved from the moment engine starts. Idling, low to middle rpm range efficiency is improved as well. Increased secondary voltage retains perfect engine combustion even in high rpm and high boost conditions. Features: Direct fit easy installation. Improved combustion in high rpm, high boost. Better engine start, stable low rpm, and idling. Improved ignition for circuit driving and other heavy-duty application. Improved stability, idling stability, response, and combustion efficiency. Provides reliable ignition and improves combustion even in rich fuel mixture like 9.5 A/F. Current limit control prevents ignition coil from damage that might be caused by an overcurrent caused by ECU error. Recommended for use with HKS SUPER FIRE RACING PLUG series (Sold separately). | DISCONTINUED |
 | mature HIGHSPARK Ignition Coil (Ignition System Parts) -(GL)ENIP-MAU-SUB-03 | ITEM DETAILS |
| Specially tuned ignition coils with modified coil design that raises the secondary voltage output. By outputting a high and stable secondary voltage, engine quietness, increased torque and response idle/low rpm, and high output during acceleration. | DISCONTINUED |
 | OKADA Projects Plasma Direct (Ignition System Parts) -SD244011R | ITEM DETAILS |
| Ignition coil with a built in high power amplifier. Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Plug and play installation. Compatible with OBD-II (On-Board-Diagnostics). | $ 481.87 |
 | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT SPARK EARTH (Ignition System Parts) -SES | ITEM DETAILS |
| DISCONTINUED |
 | SARD Magic Box (Ignition System Parts) -62311 | ITEM DETAILS |
| Voltage stabiliser. | DISCONTINUED |
 | SARD Sweeper (Ignition System Parts) -62310 | ITEM DETAILS |
| Voltage stabiliser. | DISCONTINUED |
 | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Injector Upgrade Kit (Injectors) -14002-AF003 | ITEM DETAILS |
| $ 612.26 |
 | CUSCO Oil Catch Tank More Info (Oil Breather Tanks) -692 009 A | ITEM DETAILS |
| Car specific kit. | $ 63.75 |
 | OKUYAMA CARBING Oil Catch Tank (Oil Breather Tanks) -206 520 0 | ITEM DETAILS |
| $ 108.66 |
 | PROVA T-REV DIT (Oil Breather Tanks) -50230BE0000 (SUBARU 03) | ITEM DETAILS |
| Crank case depressurisation device. Improve engine response and drive feel. As used in higher performance race car and race motorcycle engines. | $ 376.68 |
 | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | ITEM DETAILS |
| Universal kit. 1000ml. | $ 92.60 |
 | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | ITEM DETAILS |
| Universal kit. | DISCONTINUED |
| TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | ITEM DETAILS |
| Hose for use with TRUST GReddy Breather Tanks. | $ 10.90 |
 | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | ITEM DETAILS |
| Universal kit. 680ml. | $ 87.24 |
 | Blitz Racing Oil Filter (Oil Filters) -18708 (B-8202) | ITEM DETAILS |
| A high-performance oil filter that Blitz has worked on, with a proven track record in filters for air cleaners. Durability above regulation level in JIS impulse durability tests. Designed exclusively for maximizing filtration performance of the filter itself. By increasing the filter strength, it corresponds to the high standard among all load conditions. | $ 20.16 |
 | HKS Oil Filter (Oil Filters) -52009-AK005 | ITEM DETAILS |
| New concept oil filter improves oil pressure drop and flow properties. The oil pressure drop and flow properties are improved by approximately 30% compared to current sports oil filters. The stress on the engine is reduced for better engine response. Utilizing the filter original designed for HKS Oil Filter and increasing its filter surface area by 15%, compared with a conventional product, greatly improved particle collection performance. HKS Oil Filter's minimum particle size is 20μ compared with 25μ of JIS standard which corresponds to the filtration performance requirement of most engines. Filter replacement is recommended every 10,000 km or 6 months under the normal driving environment. For sports and/or race use, it is recommend to replace filters every 3,000 km ~ 5,000km. | DISCONTINUED |
 | PROVA Engine Oil Filter (Oil Filters) -10000SP0011 (Old: 10000EP0010) | ITEM DETAILS |
| Uses a density filter and ensures a stable filter paper area. Adjusting filter folds at regular intervals prevents adhesion and bias between filter paper. By creating a smooth oil flow path, efficient and stable filter performance is acheived. | $ 18.27 |
 | PROVA Oil Level Gauge Holder (Oil Other) -93000AH0200 | ITEM DETAILS |
| Level gauge holder prevents the dip stick from working its way out of the holder tube. Also serves as an engine bay accent. Black anodized aluminum. | DISCONTINUED |
 | PROVA Oil Separator (Oil Other) -50000TK0012 | ITEM DETAILS |
| Separates oil from blow-by gases, returning only oil to the oil pan. No need to empty discharged oil like with a catch tank. Oil can be added by simply removing the filler cap only. | DISCONTINUED |
 | SYMS Oil Pan and Baffle Set (Oil Pans (Sumps) and Baffle Plates) -Y1000EJ001 | ITEM DETAILS |
| Significantly reduces chances of engine failure caused by engine oil starvation during high lateral G during cornering. | $ 279.68 |
 | JUN High Flow Oil Pump (Oil Pumps) -1013M-F001 | ITEM DETAILS |
| JUN developed high flow oil pumps for the engines which may lack of oil supply when operating at high revolution. Lack of oil becomes a serious problem in tuned engines, so the new gears in the oil pumps increase flowing oil quantity. | $ 524.71 |
 | TOMEI High Performance Oil Pump for EJ (Oil Pumps) -194013 | ITEM DETAILS |
| High volume performance oil pump for EJ20/EJ25 engines. | $ 725.64 |
| Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 0W-20 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 5W-30 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 10W-40 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 15W-50 SL/CF. 4 litres. | $ 67.40 |
 | Billion Racing PS Tank (Other) -BRPS-090 | ITEM DETAILS |
| Power steering fluid tank. | DISCONTINUED |
 | TOMEI Forged Piston Kit (Piston Kits and Parts) -1183925312 | ITEM DETAILS |
| Kit includes pistons, piston rings, pins and circlips. | $ 725.64 |
| TOMEI Forged Piston Kit EJ22 Repair Parts (Piston Kits and Parts) -1181625314 | ITEM DETAILS |
| Parts for repair/overhaul of TOMEI Forged Piston Kit. | $ 177.57 |
 | CUSCO Aluminium Pulley Kit (Pulleys) -6A1 733 A | ITEM DETAILS |
| Lightweight pulleys create less stress on the engine, resulting in better acceleration. CUSCO blue lightweight aluminium. | $ 185.00 |
| NEOPLOT A/C Belt Set (Pulleys) -SJ11718 (SUB: 11718AA082) | ITEM DETAILS |
| Belt set for use NEOPLOT Crank Pulley NEO. | $ 33.20 |
 | NEOPLOT Alternator Pulley NEO (Pulleys) -NP10210P | ITEM DETAILS |
| Lightweight alternator pulley. Over 55% ligher than standard alternator pulley. Duralumin with alumite finish. | DISCONTINUED |
 | NEOPLOT Crank Pulley NEO (Pulleys) -NP10110P | ITEM DETAILS |
| Lightweight crank pulley. Over a third lighter than the standard item. Duralumin with alumite finish. | DISCONTINUED |
 | NEOPLOT Power Steering Pulley NEO (Pulleys) -NP10310P | ITEM DETAILS |
| Lightweight power steering pump pulley. Duralumin with alumite finish. | DISCONTINUED |
 | TOMEI Head Stud Set (Reinforced Bolts) -193112 | ITEM DETAILS |
| $ 317.47 |
 | TOMEI Main Bolts (Reinforced Bolts) -193113 | ITEM DETAILS |
| $ 538.56 |
 | HKS Super Fire Racing M (Spark Plugs) -50003-M35IL | ITEM DETAILS |
| M Series. Improved ignition performance, durability and anticarbon build-up. The Ultimate sparkspark plug for increasing performance of tuned or stock engines. Iridium and platinum spark plug. | $ 12.47 |
 | TOMEI EJ22KIT (Stroker Kits) -252007 | ITEM DETAILS |
| $ 2834.55 |
 | TOMEI EJ22KIT Competition Model (Stroker Kits) -221047 | ITEM DETAILS |
| DISCONTINUED |
 | HKS GT III Sports Turbine Kit (Turbocharger Kits) -11004-AF013 | ITEM DETAILS |
| GT Series Masterpiece. Mitsubishi HI CHRA (Billet Aluminium). HKS compressor housing (Billet Aluminium). | $ 1689.39 |
 | TOMEI Turbine Kit (EJ Twin Scroll) (Turbocharger Kits) -173103 | ITEM DETAILS |
| $ 1972.85 |
 | CUSCO Standard Replacement Turbine (Turbochargers) -C14411AA820 | ITEM DETAILS |
| Completely bolt-on type replacement of the standard turbocharger unit. | $ 1726.18 |
Drivetrain Parts
 | CUSCO Stainless Mesh Clutch Line (Clutch Hoses) -672 022 CL | ITEM DETAILS |
| Tough clutch hose with 3-layer design that can withstand harsh conditions. PTFE (polytetrafluoroethylene = Teflon) hose with excellent heat, pressure and chemical resistance is used for the core tube. Expansion due to internal pressure is suppressed by covering the core tube with a tough stainless mesh hose. In addition, by completely covering it with a PVC (polyvinyl chloride) tube, excellent weather resistance is achieved. Steel fittings with the same shape as standard hose is used for both ends, making installation easy and connections reliable. | $ 53.67 |
 | CUSCO Clutch Cover (Clutches) -00C 022 B667 | ITEM DETAILS |
| $ 193.00 |
 | CUSCO Copper Disc (Clutches) -00C 022 R667 | ITEM DETAILS |
| Copper clutch disc. | $ 148.66 |
 | CUSCO Copper Single Set (Clutches) -667 022 F | ITEM DETAILS |
| Copper Single Disc and Clutch Cover Set. | $ 307.39 |
 | CUSCO Copper Twin (Clutches) -667 022 CP | ITEM DETAILS |
| Twin plate clutch system - Copper Twin. Aluminium cover, twin copper discs, and system specific chromoly flywheel. Easy to use, while handling high power. Suitable for street to circuit. | $ 1017.92 |
 | CUSCO Metal Disc (Clutches) -00C 022 C667F | ITEM DETAILS |
| Metal clutch disc. | $ 160.25 |
 | CUSCO Metal Set (Clutches) -667 022 G | ITEM DETAILS |
| Metal Disc and Clutch Cover Set. | $ 307.39 |
 | CUSCO Single Clutch System (Clutches) -667 022 HP (667 022 HP1) | ITEM DETAILS |
| Suitable for those applications, where ordinary heavy duty clutches is unsatisfactory. Designed to balance pedal feel that close to standard while providing optimal power transmission. Aluminium cover, metal disc, and system specific chromoly flywheel. | $ 736.73 |
 | CUSCO Single Clutch System (Replacement Parts) (Clutches) -00C 022 CH00SCU1 | ITEM DETAILS |
| $ 309.91 |
 | CUSCO Twin Metal (Clutches) -667 022 TP | ITEM DETAILS |
| Twin plate clutch system - Twin Metal. Aluminium cover, twin metal discs, and system specific chromoly flywheel. Lightweight pedal, but suitable for high power applications. | $ 973.57 |
 | EXEDY Single Sports Series Clutch Cover (Clutches) -FC12T | ITEM DETAILS |
| $ 200.56 |
 | EXEDY Single Sports Series Clutch Disc (Clutches) -FD12T1 | ITEM DETAILS |
| $ 160.25 |
 | EXEDY Single Sports Series Clutch Set (Clutches) -FK03HA | ITEM DETAILS |
| Disc and cover set. Approximately 40% higher clamp load than the standard clutch. | $ 389.78 |
 | EXEDY Hyper CARBON-D (Twin) (Clutches) -FM022SDMC1 | ITEM DETAILS |
| Damper type discs. Silent type hub. Carbon clutches offer excellent operational feel by reducing inertia. Unique damper design significantly reduces shock torque and gearbox rattle. The highest possible performance with the same ease of use as the original equipment clutch. SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 20 to 30% reduction in inertia vs OEM. Suitable for: Street Modified / Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
 | EXEDY Hyper CARBON-R (Triple) (Clutches) -FM023SBMC1 | ITEM DETAILS |
| Damperless (centre hub) type discs. Rigid type center hub design gives the Carbon-R the ultimate shift response. Light weight flywheel and hub design significantly reduces inertia, giving excellent acceleration response. Added SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
 | EXEDY Hyper CARBON-R (Twin) (Clutches) -FM022SBMC1 | ITEM DETAILS |
| Damperless (centre hub) type discs. Rigid type center hub design gives the Carbon-R the ultimate shift response. Light weight flywheel and hub design significantly reduces inertia, giving excellent acceleration response. Added SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
 | EXEDY Hyper COMPE-D (Twin) (Clutches) -FM022SDL | ITEM DETAILS |
| Lightweight model. Damper type discs. The Compe-D damper absorbs shock torque, protecting the drive system. The combination of a lightweight forged aluminium clutch cover and ultra-light drilled chromium-molybdenum flywheel allows the Compe-D to achieve the lowest possible weight. The centre plate with grooves provides improved disc release for better disengagement at any rpm. The 6-PAD disc design ensures low weight and low inertia, contributing to faster shift response. 20 to 30% reduction in inertia vs OEM. Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
 | EXEDY Hyper COMPE-R (Twin) (Clutches) -FM022SBL | ITEM DETAILS |
| Lightweight model. Damperless (centre hub) type discs. Lightweight and low inertia drive boss and chromium molybdenum flywheel. Thinner centre plates improve the disengagement under high rotation. Lightweight and low inertia clutch plates with optimized metal button configuration improve shift feel and direct engagement characteristics, reducing shifting time lag. A longer spline hub is utilized, reducing surface pressure on the transmission input shaft teeth subsequently reducing wear on the shaft. Conventional clutch discs disengage by sliding on the input shaft. The centre hub design, improves disengagement response. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | $ 1082.42 |
 | EXEDY Hyper MULTI (Twin) (Clutches) -FM022SD | ITEM DETAILS |
| Self-levelling intermediate plate design reduces gearbox rattle and increases the disengagement performance (PAT.). Unique intermediate plate design increases heat resistance which improves clutch life. 20 to 30% reduction in inertia vs OEM. Suitable for: Street Modified / Track day / Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | $ 1220.75 |
 | EXEDY Hyper Single EVO (Clutches) -FH02SDX | ITEM DETAILS |
| By using lightweight, ultra-high strength fibers that are also used in body armor (bulletproof clothing), EXEDY increased the heat resistance of other raw materials and the combination of materials, making it possible to achieve high heat resistance in ultra-high temperature ranges. EXEDY succeeded in reducing weight while maintaining wear resistance and friction characteristics. Not only improving friction performance but also to lowering inertia of the clutch disc, improving shift feeling and extending the life of transmission synchronizers. | $ 685.33 |
 | EXEDY Hyper SINGLE VF (Clutches) -FH02SDV | ITEM DETAILS |
| Various Friction. Metal and Organic (Ultra Fiber) damper type disc. Includes flywheel. Capable of handling a high torque capacity without sacrificing the feel of a standard clutch. Combination of cerametallic & organic friction facings allows for high heat durability. Unique cushioning plate design reduces pedal effort by 12% vs Hyper Single. 20 to 30% reduction in inertia vs OEM. 225mm disc models rated to 500Nm (approx 370 ft lbf). 200mm disc models rated to 300Nm (approx 220 ft lbf). Suitable for: Street Modified / Track day. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | $ 775.28 |
 | HKS LA Clutch Twin More Info (Clutches) -26011-AF001 | ITEM DETAILS |
| The tuning expert HKS provides the clutch system for streets and sports use. Capable torque, pedal effort, and semi-engagement range are closely examined for various driving situations. Despite supporting approximately 700ps, the main concept for the Twin Plate LA Clutch remains the same. Using "MG Composite Discs" to reduce judder and achieve better driving feel compare to stock clutch. Disc dampers are used to reduce gear noise and protect the transmission from shock torque. The LA Twin also has a "Pivot Ring" within the pressure plate to offer partial engagement like no other twin plate clutch. Twin plate clutch. | $ 1167.20 |
 | ORC Light Series ORC-400-Light (Clutches) -ORC-P400L-HP-SB0102 | ITEM DETAILS |
| The fun of a manual transmission car is not only higher output and drifting, there is also the pleasure of comfortable operation by the driver. However, until now, the enjoyment of the reinforced clutch was a little different due to being difficult to use. This single plate clutch unit has the same operation feeling as the standard clutch. ORC's Light Clutch series is are clutches that allows the engine to run lightly, maintaining the fun of changing gears while providing good feel in semi engaged conditions. | $ 604.70 |
 | ORC Metal Series ORC-409 (Clutches) -ORC-P409D-SB0102 | ITEM DETAILS |
| Single Plate Clutch. | $ 645.02 |
 | ORC Metal Series ORC-559 (Clutches) -ORC-P559-SB0102 | ITEM DETAILS |
| Twin Plate Clutch. ~630N/m(65kgf/m). | $ 866.74 |
 | ORC Carbon Series ORC-559-CC (Clutches) -ORC-P559CC-SB0102 | ITEM DETAILS |
| Twin Plate Carbon Clutch. ~630N/m(65kgf/m). | $ 1108.62 |
| ORC Metal Series ORC-659 (Clutches) -ORC-P659-SB0102 | ITEM DETAILS |
| Twin Plate Clutch. ~735N/m(75kgf/m). | $ 917.13 |
 | ORC Racing Series ORC-659-RC (Clutches) -ORC-P659-SB0102-RC | ITEM DETAILS |
| Super light weight (60~70% of standard), highly direct for circuit racing applications. Engine idle stability may be affected in some applications. Twin Plate Clutch. | $ 1148.94 |
 | CUSCO Rear Differential Mount Collar (Differential Bushes and Collars) -692 928 A | ITEM DETAILS |
| Improved traction and response by eliminating unnecessary carrier movement. | $ 58.71 |
 | LAILE Beatrush Reinforced Differential Member (Differential Bushes and Collars) -S76102MTD-FM | ITEM DETAILS |
| LAILE Beatrush reinforced diff member uses rigid urethane bushes so the movement of the rear differential is controlled when accelerator is applied, making it easy to convey drive directly. Member body assembly is bolt on replacement of standard item, making it easy to install without needing to change bushes. | $ 103.37 |
 | STi DCCD Overhaul Kit (Differential Overhaul Kits and Parts) -390004S020 | ITEM DETAILS |
| $ 451.32 |
| CUSCO Diff Cover Fitting Kit (Differential Parts) -(GL)SUB-38354AA020 + 38353AA050 | ITEM DETAILS |
| $ 6.88 |
 | CUSCO Heavy Duty Rear Diff Mount (Differential Parts) -6A1 489 A | ITEM DETAILS |
| High quality, high strength steel box structure design (Blue painted finish). Bolt on (exchange) installation using the pre installed heavy duty rubber bushes. Transfer 100% of performance to the road, improving traction. | $ 73.82 |
 | CUSCO LSD Initial Torque Check Tool (SST) (Differential Parts) -LSD SST 18 | ITEM DETAILS |
| Limited slip differential initial torque check tool. Pricing for 1 unit (2 required for use). | $ 48.19 |
 | CUSCO Volume Up Diff Cover (Differential Parts) -692 008 AS | ITEM DETAILS |
$ 364.08 |
 | CUSCO LSD Type MZ More Info (Differentials) -LSD 184 A | ITEM DETAILS |
| LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 529.12 |
 | CUSCO LSD Type RS More Info (Differentials) -LSD 184 F | ITEM DETAILS |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 604.70 |
 | CUSCO Drive Shaft Heat Shield (Driveshafts) -6A1 047 F | ITEM DETAILS |
| Reduces chances of drive shaft trouble by blocking heat from exhaust, decreasing the effectiveness of the grease inside the inner joint. In the case where the drive shaft boot is broken, grease is less likely to adhere to the exhaust, preventing secondary problems from arising. | $ 38.55 |
 | Pleasure Racing Service Heavy Duty Drive Shaft (Driveshafts) -WSB604 | ITEM DETAILS |
| Billet chromoly. | $ 909.89 |
 | CUSCO Super Lightweight Chromoly Flywheel (Flywheels) -667 023 A | ITEM DETAILS |
| $ 353.37 |
 | EXEDY Single Sports Series Flywheel (Flywheels) -FF03 | ITEM DETAILS |
| $ 277.34 |
 | CUSCO Shift Linkage Bush (Other) -692 940 A | ITEM DETAILS |
| By replacing the standard rubber bushes of the shift lever mount with a hard urethane bushes, excess movement is suppressed and the shift feeling is improved. In addition, it assists quick shift work during sports driving and reduces shift mistakes. | $ 23.43 |
Suspension Parts
 | Blitz Stabilink Adjuster (Anti Roll (Sway/Stabiliser) Bars) -93199 | ITEM DETAILS |
| Stabilizer/swaybar/anti roll bar links. | $ 108.97 |
 | CUSCO Adjustable Pillow Stabiliser Links (Anti Roll (Sway/Stabiliser) Bars) -965 317 A | ITEM DETAILS |
| Adjustable type pillow rear stabilizer link, that maximises the effect of the rear stabilizer! Stabilizer angle can be corrected to proper angle according to lowered ride heights to provide more linear effect. The pillow collar holder structure allows for easy maintenance, while providing structural rigidity, preventing looseness. | $ 99.02 |
 | CUSCO Stabiliser Bar More Info (Anti Roll (Sway/Stabiliser) Bars) -692 311 A23 | ITEM DETAILS |
| Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. | $ 114.14 |
 | CUSCO BCS More Info (Brake Cylinder Stoppers) -692 561 A | ITEM DETAILS |
| Brake cylinder stopper (BCS). Suppresses bulkhead deflection that occurs when applying brakes by reinforcing the brake master cylinder. Provides for more direct braking feel. For right hand drive models. | $ 38.55 |
 | CUSCO Heavy Duty Brake Pedal Plate (Brake Cylinder Stoppers) -965 486 AN | ITEM DETAILS |
| Brake pedal brace. Improves brake pedal touch and controlability. Plate reinforces the bracket, suppressing deflection at time of braking. Suitable for use in conjunction with CUSCO BCS (Sold separately) for even further brake feel. Bolt on installation. | $ 99.02 |
 | NEOPLOT Master Cylinder Stopper NEO (Brake Cylinder Stoppers) -NP11610P | ITEM DETAILS |
| Lightweight brake master cylinder stopper, for direct brake touch and feel. The master cylinder stopper NEO is a reinforcing item that suppresses unnecessary movement of the brake master cylinder. The brake master cylinder is fixed to the bulkhead together with the brake booster, but when you step on the brake pedal, the force that the flexure brake applies to the bulkhead will escape in units of a few mm by that force. By suppressing the deflection (unnecessary movement) of several mm, it becomes possible to realize direct brake feel. | DISCONTINUED |
 | J Speed Brake Cooling Deflector Kit (Brake Ducts and Ducting) -300005M | ITEM DETAILS |
| $ 138.58 |
 | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | ITEM DETAILS |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 24.57 |
 | APP Brake Line System (Brake Lines) -SB016-ST | ITEM DETAILS |
| $ 108.41 |
 | Project μ (Mu) Teflon Brake Lines (Brake Lines) -BLF-037AC | ITEM DETAILS |
| Teflon hose, covered with stainless mesh hose, and PVC outer tube. | $ 154.07 |
 | DIXCEL EC Type (Brake Pads) -EC 361 077 | ITEM DETAILS |
| EXTRA Cruise. Street/Winding (Normal) use. 0~450°. NAO (Non Asbestos Organic material). Low dust, squealing and rotor wear. Ideal for upgrade from standard pads. | $ 39.43 |
 | DIXCEL ES Type (Brake Pads) -ES 361 077 | ITEM DETAILS |
| EXTRA Speed. Street/Winding (Normal)/Winding (Hard) use. 0~600°. NAO (Non Asbestos Organic material). Ideal for highway/winding sports driving. | $ 43.84 |
 | DIXCEL M Type (Brake Pads) -M 361 077 | ITEM DETAILS |
| Street/Winding (Normal) use. 0~500°. Non Asbestos Ceramic material. Super low dust. Ideal for users who want low dust and higher control. | $ 84.78 |
 | DIXCEL R01 Type (Brake Pads) -R01 361 1591 | ITEM DETAILS |
| Ultra low heat conduction racing compound. For N1 racing, tarmac rallying and circuit use. 200~900°. HD (High Density) Graphite metallic material. Initialμ: 0.48, Averageμ: 0.38~0.43. | DISCONTINUED |
 | DIXCEL Special Endurance Compound R23C More Info (Brake Pads) -R23C 325 499 | ITEM DETAILS |
| Special Order Series. High temperature tolerance and endurance for mid-long distance racing (amateur level 4-7 hours). Greater than twice the endurance of RA Type compound. Carbon semi metallic material. Initialμ: 0.38, Averageμ: 0.30~0.35. | $ 346.82 |
 | DIXCEL RA Type (Brake Pads) -RA 361 077 | ITEM DETAILS |
| High performance, linear control racing compound. Race/rally/circuit use. 200~900°. Carbon semi metallic material. Initialμ: 0.51, Averageμ: 0.40~0.45. | $ 130.14 |
 | DIXCEL RD Type (Brake Pads) -RD 325 499 | ITEM DETAILS |
| Rear specific compound. Gymkhana/drift/rally/dirt trial use. Sinterred metallic material. μ: 0.55~0.60 (At operating temperature). For application where rear wheel locki is desired. | $ 135.18 |
 | DIXCEL RE Type (Brake Pads) -RE 361 1591 | ITEM DETAILS |
| ABS specific high performance, linear control racing compound. Ideal for sprint race/rally/circuit use. 200~900°. Carbon semi metallic material. Initialμ: 0.51, Averageμ: 0.40~0.45. | $ 246.04 |
 | DIXCEL RGM type Side Inner Shoe (Brake Pads) -RGM-3450302 | ITEM DETAILS |
| Side (hand brake) inner shoes for gymkhana, dirt trial, rally, drift applications. Through thorough repeated tests with actual cars, the materials used in this inner shoes offer excellent initial braking. Excellent initial braking makes spin turns that you frequently see in gymkhana, dart trials, rallies, drift competitions easy. Non asbestos. | $ 98.26 |
 | DIXCEL Specom Alpha More Info (Brake Pads) -SP-A 361 077 | ITEM DETAILS |
| Racing compound as used in Super GT and Formula racing. Designed for use with race cars without brake master cylinder. Provides greater control under release phase of brake operation. Carbon semi metallic material. Initialμ: 0.55, Averageμ: 0.43~0.48. | $ 162.89 |
| DIXCEL Specom Beta More Info (Brake Pads) -BE 361 077 | ITEM DETAILS |
| Racing compound as used in Super Taikyu (Endurance) racing. Consistent pedal touch and control over long operation periods providing driver with confindence. Carbon semi metallic material. Initialμ: 0.48, Averageμ: 0.40~0.43. | $ 208.24 |
 | DIXCEL X Type (Brake Pads) -X 361 077 | ITEM DETAILS |
| Street/Winding (Normal)/Off road use. Ideal for heavier cars, mini van, SUVs and large wheel applications. 0~700°. Graphite metallic. | $ 104.94 |
 | DIXCEL Z Type (Brake Pads) -Z 361 077 | ITEM DETAILS |
| Street to circuit use. 0~850°. Graphite metallic material. High stopping power and controlable all round performance compound. | $ 115.02 |
 | ENDLESS CC-A (Brake Pads) -EP357CCA | ITEM DETAILS |
| Street. Ceramic Carbon Metal. 50~480°C. Average friction coefficient: 0.38~0.45. | DISCONTINUED |
 | ENDLESS CC-R (Brake Pads) -EP357CCR | ITEM DETAILS |
| Winding road/circuit. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | DISCONTINUED |
 | ENDLESS CC-Rg (Brake Pads) -EP357CRG2 | ITEM DETAILS |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $ 148.03 |
 | ENDLESS CC-X (Brake Pads) -EP357CCX | ITEM DETAILS |
| Winding road/circuit. Ceramic Carbon Metal. 50~700°C. Average friction coefficient: 0.38~0.50. | DISCONTINUED |
 | ENDLESS CC33 (S55G) (Brake Pads) -EP357CC33 | ITEM DETAILS |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.28~0.33. | $ 130.39 |
| ENDLESS CC35 type-E (N84M) (Brake Pads) -EP357CC35E | ITEM DETAILS |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.30~0.35. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 228.02 |
| ENDLESS CC38 (ME22) (Brake Pads) -EP357CC38 | ITEM DETAILS |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.33~0.38. Based on the CC40 (ME20) compound, this variation with slightly lowered friction coefficient, allows for more control. Ideal for medium weight vehicles with high breaking loads or heavy vehicles on low speed circuits. | $ 142.99 |
| ENDLESS CC40 (ME20) (Brake Pads) -EP357CC40 | ITEM DETAILS |
| Circuit Compound. Semi metallic. 0~650°C. Average friction coefficient: 0.22~0.28. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 142.99 |
| ENDLESS CC43 (N35S) (Brake Pads) -EP357CC43 | ITEM DETAILS |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.40~0.43. These brake pads deliver stable performance even under high temperatures and high loads, especially when used continuously with heavy vehicles, putting a large strain on the brakes. They pads are recommended for high-powered vehicles driving on circuits, where increased braking performance is desired. The material provides excellent control and stable braking force, enough to be used in the WRC. They also feature excellent release control with a moderate pedal stroke and a tactile feel. - Circuit driving for heavy vehicles weighing approximately 2 tons. - Circuit driving for high-powered vehicles. | $ 130.39 |
| ENDLESS CC60 (N30C) (Brake Pads) -EP357CC60 | ITEM DETAILS |
| Circuit Compound (Rally Use). Semi metallic. 150~800°C. Average friction coefficient: 0.50~0.60. | $ 139.52 |
 | ENDLESS MA22B (Brake Pads) -EP357MA22B | ITEM DETAILS |
| Circuit. Hardened Ceramic Metal. 200~800°C. Average friction coefficient: 0.40~0.45. | DISCONTINUED |
 | ENDLESS MX72 (Brake Pads) -EP357MX72 | ITEM DETAILS |
| Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $ 132.91 |
 | ENDLESS MX72 PLUS (Brake Pads) -EP357MXPL | ITEM DETAILS |
| Street~circuit use. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~750°C. Average friction coefficient: 0.39~0.47. | $ 137.95 |
 | ENDLESS NEW Type R (Brake Pads) -EP357TRN | ITEM DETAILS |
| Winding road/circuit. Material: Low steel. Brake rotor operating temperature: 50~650°C. Average friction coefficient: 0.30~0.35. Ideal tyre: radial/high grip radial. | $ 88.82 |
 | ENDLESS NS97 (Brake Pads) -EP357NS97 | ITEM DETAILS |
| Street. Low steel (non-asbestos). 0~500°C. Average friction coefficient: 0.37~0.43. | DISCONTINUED |
 | ENDLESS SNP (Brake Pads) -EP357SNP | ITEM DETAILS |
| Street. NAO compound (Non-Asbestos-Organic). 0~400°C. Average friction coefficient: 0.35~0.41. | DISCONTINUED |
 | ENDLESS SSM (Brake Pads) -EP357SSM | ITEM DETAILS |
| Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | DISCONTINUED |
 | ENDLESS SSM PLUS (Brake Pads) -EP357MP | ITEM DETAILS |
| Super Street M-Sports PLUS. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~550°C. Average friction coefficient: 0.33~0.40. | $ 132.91 |
 | ENDLESS SSS (Brake Pads) -EP357SS2 | ITEM DETAILS |
| Super Street S-Sports. Street. Non asbestos. 0~480°C. Average friction coefficient: 0.38~0.45. | $ 87.56 |
 | ENDLESS SSY (Brake Pads) -EP357SY2 | ITEM DETAILS |
| Super Street Y-Sports. Street. Non asbestos. 0~400°C. Average friction coefficient: 0.35~0.45. | $ 56.06 |
 | ENDLESS Type R (Brake Pads) -EP357TR | ITEM DETAILS |
| Discontinued and superceded by ENDLESS NEW Type R. Winding road/circuit. Material: Non asbestos. Brake rotor operating temperature: 0~650°C. Average friction coefficient: 0.35~0.44. | DISCONTINUED |
 | ENDLESS W-003 (Brake Pads) -RCP357W003 | ITEM DETAILS |
| Circuit. Ceramic Carbon Metal. 200~850°C. Average friction coefficient: 0.40~0.45. | $ 181.41 |
 | Project μ (Mu) B-SPEC (Brake Pads) -F506-BSP (Old: F906-BSP) | ITEM DETAILS |
| Street Sports. Reliable braking power and fade resistance suitable for sports driving, all at a reasonable price. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 84.47 |
 | Project μ (Mu) CLUBMAN SINTERED (Brake Pads) -F906-ClubmanSintered | ITEM DETAILS |
| Circuit Race. Ideal for clubman racing or amateur endurance racing. Designed for high durability and heat resistance experienced during high load circuit racing. Material: Super alloy sintered. Temperature range: 350~1000°C. Friction coefficient: 0.28~0.35. | DISCONTINUED |
 | Project μ (Mu) COMP-B for Gymkhana (Brake Pads) -F906 GYM | ITEM DETAILS |
| Compound dedicated to the gymkhana competition, pursuing the pleasure of freely controlling the vehicle. Competition. Carbon metal. Front: 0~450°C. Friction coefficient: 0.38~0.49. Rear: 0~400°C. Friction coefficient: 0.48~0.60. | DISCONTINUED |
| Project μ (Mu) COMP-B for Gymkhana (Rear Metal) (Brake Pads) -R906-CompBGymRearMetal | ITEM DETAILS |
| Competition. Sintered metal. 0~500°C. Friction coefficient: 0.50~0.62. | DISCONTINUED |
 | Project μ (Mu) COMP-B for Gymkhana Inner Shoe (Brake Pads) -IS901-CompBGymInnerShoe | ITEM DETAILS |
| A model exclusively for gymkhana competition, pursuing the pleasures of greater vehicle control. Side (hand) brake pads. Super graphite metallic. 50~500°C. | DISCONTINUED |
 | Project μ (Mu) D1 Spec (Brake Pads) -R906-D1SP | ITEM DETAILS |
| Competition. Asbestos free. 0~380°C. Friction coefficient: 0.50~0.55. | $ 60.85 |
 | Project μ (Mu) D1 Spec EXTREME (Brake Pads) -R906-D1EX | ITEM DETAILS |
| Competition. Carbon metal. 50~550°C. Friction coefficient: 0.48~0.59. | $ 84.47 |
 | Project μ (Mu) D1 Spec ZERO (Brake Pads) -R906-D1Z | ITEM DETAILS |
| Achieves brake control according to pedaling force by reducing changes in effectiveness and touch with respect to temperature. A low mu model that specializes in controllability in extreme conditions during drifting. Competition. Super Graphite Metallic. 0~550°C. Friction coefficient: 0.27~0.34. | $ 84.47 |
 | Project μ (Mu) LEVEL MAX500 (Brake Pads) -F906-LevelMax500 | ITEM DETAILS |
| Circuit Sports. Carbon metal. 0~500°C. Friction coefficient: 0.41~0.47. | DISCONTINUED |
 | Project μ (Mu) LEVEL MAX700 (Brake Pads) -F906-LevelMax700 | ITEM DETAILS |
| Circuit Sports. Carbon metal. 50~700°C. Friction coefficient: 0.43~0.51. | DISCONTINUED |
 | Project μ (Mu) LEVEL MAX900 (Brake Pads) -F906-LevelMax900 | ITEM DETAILS |
| Circuit Sports. Carbon + Titanium + Ceramic. 0~900°C. Friction coefficient: 0.40~0.60. | DISCONTINUED |
 | Project μ (Mu) LEVEL MAX900i (Brake Pads) -F906-LevelMax900i | ITEM DETAILS |
| Circuit Sports. Carbon metal. 100~900°C. Friction coefficient: 0.45~0.60. | DISCONTINUED |
 | Project μ (Mu) M SPEC (Brake Pads) -F906-Mspec | ITEM DETAILS |
| Street. Asbestos free. 0~500°C. Friction coefficient: 0.31~0.40. | DISCONTINUED |
 | Project μ (Mu) NS-C (Brake Pads) -F506-NSC (Old: F906-NSC) | ITEM DETAILS |
| Street. Non steel. 0~400°C. Friction coefficient: 0.34~0.38. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | $ 75.02 |
 | Project μ (Mu) NS-ZERO (Brake Pads) -F906-NSZero | ITEM DETAILS |
| Street. Asbestos free. 0~400°C. Friction coefficient: 0.32~0.37. | DISCONTINUED |
 | Project μ (Mu) RACING 111 (Brake Pads) -F506-R111 (Old: F914-R111) | ITEM DETAILS |
| In addition to outstanding pedal control performance, this compound has friction stability at high temperatures and abrasion resistance. Circuit Race. Super graphite metallic. 200~700°C. Friction coefficient: 0.34~0.40. | $ 145.88 |
 | Project μ (Mu) RACING 333 (Brake Pads) -F506-R333 (Old: F914-R333) | ITEM DETAILS |
| In addition to the friction stability through temperature changes, this compound is for pedal control that emphasizes the initial bite friction and is compatible with ABS. Circuit Race. Super graphite metallic. 250~700°C. Friction coefficient: 0.45~0.50. | $ 145.88 |
 | Project μ (Mu) RACING 777 (Brake Pads) -F506-R777 (Old: F906-R777) | ITEM DETAILS |
| Circuit Race. Carbon metal. 300~800°C. Friction coefficient: 0.40~0.55. | $ 131.71 |
 | Project μ (Mu) RACING 999 (Brake Pads) -F506-R999 (Old: F906-R999) | ITEM DETAILS |
| Circuit Race. Carbon metal. 200~800°C. Friction coefficient: 0.42~0.59. | $ 131.71 |
 | Project μ (Mu) RACING SINTERED (Brake Pads) -F906-RacingSintered | ITEM DETAILS |
| Circuit Race. Sintered metal. 350~1000°C. Friction coefficient: 0.35~0.40. | DISCONTINUED |
 | Project μ (Mu) RACING-N+ (Brake Pads) -F506-RNPL (Old: F906-RNPL) | ITEM DETAILS |
| Circuit Race. Super Graphite Metallic. 100~800°C. Friction coefficient: 0.39~0.48. | $ 122.26 |
 | Project μ (Mu) RACING-N1 (Brake Pads) -F506-RN1 (Old: F906-RN1) | ITEM DETAILS |
| Circuit Race. Carbon metal. 100~800°C. Friction coefficient: 0.33~0.45. | $ 122.26 |
 | Project μ (Mu) Sports Inner SHOE (Brake Pads) -IS501-SP-INSHOE (Old: IS901-SP-INSHOE) | ITEM DETAILS |
| Provides powerful initial braking force for initiation of spin turns and drift. Side (hand) brake pads. Non asbestos. 0~400°C. | DISCONTINUED |
 | Project μ (Mu) Type HC-CS (Brake Pads) -F506-CS (Old: F906-CS) | ITEM DETAILS |
| Hyper Carbon - Circuit Spec. Street Sports. Carbon metal. 50~800°C. Friction coefficient: 0.41~0.50. | $ 122.26 |
 | Project μ (Mu) Type HC-M1 (Brake Pads) -F506-M1 | ITEM DETAILS |
| Hyper Carbon M1. The flagship model of the HC series that covers everything from city driving to sports driving. In addition to the linear effect of the pedal control, it exhibits outstanding and stable braking power in the high temperature range. These pads have been finished with specifications that suppress dust as much as possible among graphite metal materials. Street Sports. Super graphite metallic. 50~800°C. Friction coefficient: 0.41~0.55. | $ 130.14 |
 | Project μ (Mu) Type HC+ (Brake Pads) -F506-HCPL (Old: F906-HCPL) | ITEM DETAILS |
| Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. | $ 122.26 |
 | Project μ (Mu) Type HC+ R3 (Brake Pads) -F506-R3 (Old: F906-R3) | ITEM DETAILS |
| Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. Significantly improved fade resistance of the HC series, covers everything from street to sports driving. In addition to stability in the high temperature range, this compound also allows greater pedal control by taking into account the characteristics of recent electronic control devices and ABS intervention. | $ 122.26 |
 | Project μ (Mu) Type NR (Brake Pads) -F906-NR | ITEM DETAILS |
| Street Sports. Asbestos Free. 0~600°C. Friction coefficient: 0.33~0.43. | DISCONTINUED |
 | Project μ (Mu) Type NS (Brake Pads) -F906-NS | ITEM DETAILS |
| Street. Asbestos free. 0~400°C. Friction coefficient: 0.37~0.42. | DISCONTINUED |
 | Project μ (Mu) Type PS (Brake Pads) -F506-PS (Old: F906-PS) | ITEM DETAILS |
| Street Sports. Perfect Spec. Providing adequate braking power for street sports driving, while also being low dust and noise. Brake pedal feel and control performance are high across a wide range of light to heavy vehicle applications. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 108.09 |
 | DIXCEL 2 Piece Rotor (DIXCEL Replacment) (Brake Rotors) -FS-32630W72R/73L | ITEM DETAILS |
| 2 piece outer rotors only. For use with DIXCEL bell housings. | $ 282.20 |
| DIXCEL 2 Piece Rotor (Standard Replacement) (Brake Rotors) -FS-34032W76R/77L | ITEM DETAILS |
| 2 piece outer rotors only. For use with standard bell housings. | $ 411.45 |
 | DIXCEL 2 Piece Rotor Assembly (Brake Rotors) -FSBS32630W72R/73L | ITEM DETAILS |
| Rotors, bell housings and mounting parts (Assembled). | $ 548.52 |
 | DIXCEL FCR FP Disc Rotor (Brake Rotors) -FP 361 7023 S | ITEM DETAILS |
| Stronger type plain disc rotors with 20% increased carbon content. Heat treated for stable strength after repeated expansion/contraction. Improved distortion and crack resistance. Flexible surface hardness improves biting of pads. Excellent compatibility with various compounds. Brake squeal suppressed through excellent damping characteristics. Anti rust (special heat resistant coating). Pair of 2 (Left and right). | $ 175.49 |
 | DIXCEL FCR FS Disc Rotor More Info (Brake Rotors) -FS 361 7023 S | ITEM DETAILS |
| Stronger type slit (6) disc rotors with 20% increased carbon content. Heat treated for stable strength after repeated expansion/contraction. Improved distortion and crack resistance. Flexible surface hardness improves biting of pads. Excellent compatibility with various compounds. Brake squeal suppressed through excellent damping characteristics. Anti rust (special heat resistant coating). Pair of 2 (Left and right). 12 slit type option available (Please contact us for further details). | $ 220.84 |
 | DIXCEL PD Disc Rotor (Brake Rotors) -PD 361 7023 S | ITEM DETAILS |
| Standard type, plain disc rotor with enhanced corrosion resistance (rust prevention). High quality but reasonably priced, ideal for those who want a little more performance than standard disc rotors. Pair of 2 (Left and right). | $ 140.38 |
 | DIXCEL SD Disc Rotor More Info (Brake Rotors) -SD 361 7023 S | ITEM DETAILS |
| Slit type disc rotor. 20% improved braking performance for greater stability. Pair of 2 (Left and right). | $ 132.66 |
 | ENDLESS BASIC Brake Rotor More Info (Brake Rotors) -ER716B x 2 | ITEM DETAILS |
| FC Forged. Pair of 2. 1 piece brake rotors. Ideal for users who wish to use a higher quality brake rotors when replacing standard units. | $ 362.82 |
 | ENDLESS BASIC SLIT Brake Rotor More Info (Brake Rotors) -ER716BS2 x 2 | ITEM DETAILS |
| FC Forged (Heat treated). 1 (single) piece curving slit (Slotted) brake rotors. Ideal for users who wish to upgrade standard rotors for better stability/cooling performance in hard driving conditions. Pair of 2 (Left and right). ENDLESS blue high temp painted bell hats. Please note that shape and number of internal vanes varies between specific vehicle models. | $ 257.00 |
 | ENDLESS E-SLIT Brake Rotor More Info (Brake Rotors) -ER716ES x 2 | ITEM DETAILS |
| FC Forged. Pair of 2. 1 piece E-SLIT type (Slotted) brake rotors. Ideal for users who wish to improve lap times at the circuit and for better compatibility with higher performance brake pads. | $ 498.88 |
 | ENDLESS Racing CURVING SLIT Brake Rotor More Info (Brake Rotors) -ER716RC x 2 | ITEM DETAILS |
| Special carbon blended steel (heat treated) rotors and super high strength aluminium alloy bell housings. Curving slit (slotted). Pair of 2 (Left and right). Bell housing colour: Blue Alumite. | $ 717.46 |
 | ENDLESS Racing E-SLIT Brake Rotor More Info (Brake Rotors) -ER716RE x 2 | ITEM DETAILS |
| Special carbon and steel rotors and super high strength aluminium alloy bell housings. E SLIT ROTOR features a long slit that draws a gentle curve and an E slits that are lined up on the long slit. The long slit that smoothly cuts the pad and the E-slit that provides strong braking force double the shaving effect, so that the brake pad is always kept in an optimum state, and the braking force is further improved. When the long slit on the rotor surface disappears and the letter E rises, it is a sign for replacement (wear indicator). Through extensive testing, these rotors have excellent compatibility with ENDLESS ceramic carbon brake pads (MX72/MX72PLUS/CC-Rg) and suppresses the occurrence of judder. Pair of 2 (Left and right). Bell housing colour: Blue Alumite. | $ 792.41 |
 | Project μ (Mu) SCR (Brake Rotors) -SCRF058 | ITEM DETAILS |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy (TUFRAM anodised). Suitable for circuit use. Pair of 2 (Left and right). The two-piece structure reduces weight and improves cooling efficiency, while the floating structure reduces distortion and vibration at high temperatures. The tension spring used at the joint minimizes unpleasant noise on the street, while also supporting heavy use such as circuit driving. In addition, the bell housing and bobbin have been specially treated to suppress wear. | $ 281.31 |
 | Project μ (Mu) SCR PRO (Brake Rotors) -GPRF058 | ITEM DETAILS |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy. Suitable for circuit use. Pair of 2 (Left and right). This model uses a two-piece structure that is excellent in durability, heat resistance, and heat dissipation. High-alloy high-carbon FC cast iron greatly improves crack resistance. Original screw design achieves high heat dissipation. In addition, many hot air flow paths, and unlike other models, the fins are arranged at a slight angle to the center instead of perpendicularly, which increases the speed of the hot air flow and quickly dissipates heat. | $ 512.80 |
 | Project μ (Mu) SCR-GT (Brake Rotors) -GPRF058-F | ITEM DETAILS |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy (TUFRAM anodised). Suitable for circuit use. Pair of 2 (Left and right). The two-piece structure reduces weight and improves cooling efficiency, while the floating structure reduces distortion and vibration at high temperatures. The tension spring used at the joint minimizes unpleasant noise on the street, while also supporting heavy use such as circuit driving. In addition, the bell housing and bobbin have been specially treated to suppress wear. | $ 616.42 |
 | Project μ (Mu) FS2A Forged Sports Caliper Kit 2pistons REAR More Info (Brake Upgrade Kits) -FS2A-F203R | ITEM DETAILS |
| High-performance rear dedicated model designed for strengthening rear brake power with an emphasis on balance with front brakes. Caliper size: Total length : 188.0mm / Total width : 144.2mm (Excluding brake line attachment protrusion) / Total height : 50.0mm. Includes Type NS-C pads as standard. Type NS/D1 Spec R can be optioned at time of order. | $ 1462.63 |
 | Project μ (Mu) FS44 Forged Sports Caliper Kit 4pistons x 4pads More Info (Brake Upgrade Kits) -FS44-F105A | ITEM DETAILS |
| The ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking. Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Caliper size: Total length : 282.8mm / Total width : 156.25mm (Excluding brake line attachment protrusion) / Total height : 72.3mm. Includes Type NS-C pads as standard, Type NS/D1 Spec F can be optioned at time of order. | $ 1916.16 |
 | Project μ (Mu) FS44R Forged Sports Caliper Kit 4pistons x 4pads REAR More Info (Brake Upgrade Kits) -FS44R-F203 | ITEM DETAILS |
| The ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking balance. Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Caliper size: Total length : 282.8mm / Total width : 156.25mm (Excluding brake line attachment protrusion) / Total height : 72.3mm. Includes Type NS-C pads as standard, Type NS/D1 Spec R can be optioned at time of order. | $ 2256.30 |
| Project μ (Mu) FS44S Forged Sports Caliper Kit 4pistons x 4pads SLIM More Info (Brake Upgrade Kits) -FS44S-F105 | ITEM DETAILS |
| Slim body greatly reduces caliper interference with wheels, thus making the 4Pistons x 4Pads SLIM model ideal for extreme applications. Maintains the ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking. Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Caliper size: Total length : 282.8mm / Total width : 140.2mm (Excluding brake line attachment protrusion) / Total height : 72.3mm. Kit includes: Caliper bodies, aluminum brackets, brake pads (NS-C*), 2-piece rotors, Teflon brake lines, pad support springs and other fitting parts. * Type NS-C pads as standard, Type NS/D1 Spec F can be optioned at time of order. | $ 1962.77 |
 | Project μ (Mu) FS6 Forged Sports Caliper Kit 6Pistons More Info (Brake Upgrade Kits) -FS6-F105A | ITEM DETAILS |
| The ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking. Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Caliper size: Total length : 282.8mm / Total width : 153mm (Excluding brake line attachment protrusion) / Total height : 74mm. Includes Type NS-C pads as standard, Type PS/D1 Spec ZERO can be optioned at time of order. | $ 2086.23 |
 | STi Brake Kit (Brake Upgrade Kits) -26100ZR000 | ITEM DETAILS |
| $ 3143.83 |
 | STi Brakes Pads (Brake Kit) (Brake Upgrade Kits) -ST262964S081 | ITEM DETAILS |
| $ 287.23 |
 | CUSCO Pillow Ball Bushes (Bushes and Collars) -692 464 BV | ITEM DETAILS |
| Change to the rigid metal ball joint pivots, for precise control and stability! Race proven high quality spherical joint bearings result in no compression, no squeeze bushings, making the suspension work. Bearings are assembled in high quality shells with the rubber dust boots (on the majority of models). | $ 97.01 |
 | CUSCO Steering Rack Bush Reinforcement Brackets (Bushes and Collars) -692 026 A | ITEM DETAILS |
| Power steering rack stay suppresses unnecessary distortion and shaking, making more direct steering control possible. | $ 38.11 |
 | PROVA Cross Member Collar (Bushes and Collars) -45230SN0100 | ITEM DETAILS |
| These collars are inserted between the crossmember and chassis, taking up the slop present with the stock fasteners and effectively locking the crossmember to the vehicle. This prevents unwanted motion of the crossmember, which provides a more solid, consistent feeling, particularly in sports driving. Produced in cooperation with Spoon Sports. The position of the crossmember in relation to the body may change slightly after installing these collars. Suspension alignment is recommended after installation. After installation, be sure to check the crossmember fixing bolts periodically for tightness. | $ 126.61 |
 | SPOON SPORTS Rigid Collar (Bushes and Collars) -50261-GRB-000 | ITEM DETAILS |
| Strengthens and increases chassis rigidity without going overboard and compromising the cars inherent handling characteristics. Rigid collars are simple in their shape, clever in their design, made from a aluminium alloy (kept confidential), provides performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan. Rigid collar kits are simple to fit and low cost, without affecting the basic geometry of the body. The way the Rigid Collars works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. When the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins. This is why an older vehicles fitted with new bushes, shocks and springs, still doesn't behave like a new car. Rigid Collars are a aluminium washer with a square outer taper that increases adhesion on the thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and bolt hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and permanently stopping movement. Rigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident. | DISCONTINUED |
 | Arai Motorsport AMS Response Front Member Brace (Chassis Bars) -FMB001AMS001 | ITEM DETAILS |
| $ 133.03 |
 | Arai Motorsport AMS Response RFB Floor I (Chassis Bars) -(GL)SUCB-ARM-GRB-01 | ITEM DETAILS |
$ 564.30 |
 | Arai Motorsport AMS Response RFB Rear Control I (Chassis Bars) -(GL)SUCB-ARM-GRB-03 | ITEM DETAILS |
$ 142.42 |
 | Arai Motorsport AMS Response RFB Rear Member I (Chassis Bars) -(GL)SUCB-ARM-GRB-05 | ITEM DETAILS |
$ 54.45 |
 | Arai Motorsport AMS Response RFB Strut I (Chassis Bars) -(GL)SUCB-ARM-GRB-02 | ITEM DETAILS |
| Front strut stiffening braces. Developed to increase the rigidity of the front strut and increase the response to steering. By installing RFB Strut I, steering response when entering a corner will be significantly improved. It also prevents in-lift, which improves traction on the inner wheels. | DISCONTINUED |
 | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | ITEM DETAILS |
| Performance damper unit only. | DISCONTINUED |
 | CUSCO Lower Arm Bar Version I (Chassis Bars) -692 475 A | ITEM DETAILS |
| Reduce chassis flexing and improve body rigidity. The lateral arm improves body rigidity by connecting at the lower arm points, thus preventing body flex and therefore dramatically improving steering rigidity and response, and traction. | $ 68.79 |
 | CUSCO Lower Arm Bar Version II (Chassis Bars) -692 477 A | ITEM DETAILS |
| Reduce chassis flex even further with these bars that have multiple mounting locations (more than 2). This greatly increases rigidity and helps maintain chassis stiffness during the hardest of cornering. It also improves steering rigidity, response and tire traction. | $ 83.90 |
 | OKUYAMA CARBING Floor Sub Frame (Chassis Bars) -672 520 0 | ITEM DETAILS |
| DISCONTINUED |
 | OKUYAMA CARBING Lower Arm Bar (Chassis Bars) -681 514 1 | ITEM DETAILS |
| $ 306.19 |
 | OKUYAMA CARBING Member Brace (Chassis Bars) -671 514 0 | ITEM DETAILS |
| DISCONTINUED |
 | STi Flexible Draw Stiffener (Chassis Bars) -ST20118ZR000 | ITEM DETAILS |
| By installing between the car body and the cross member, we can compensate for the bending of the chassis while driving and to combine agile initial steering and supple ride comfort. In addition, by improving the road contact of the four wheels, stability during cornering increases, realizing a quick and straightforward steering wheel steering feeling. | $ 294.16 |
 | STi Flexible Support Kit (Chassis Bars) -ST20156ZR000 | ITEM DETAILS |
| A pillow ball bush mounted to the central part of the support plate which connects the sub-frame and body ensures that the necessary amount of power is transmitted to the rear wheels without delay, and at the same time blocks any unnecessary force input. This design improves the responsiveness and grip of the rear wheels, and increases roll rigidity, resulting in a more stable control and comfortable ride. | $ 186.45 |
 | STi Support Kit (Chassis Bars) -ST20106ZR000 | ITEM DETAILS |
| Improves stability when cornering, and provides fast, responsive steering performance while still allowing for a comfortable ride. | $ 186.45 |
 | Apex APEXi N1 Evolution Damper (Coilover Kits) -264CF021 | ITEM DETAILS |
| The N1 Evolution is the newest generation of the track engineered flag ship N1 suspension. All N1 dampers feature large piston, monotube design using a threaded base for height adjustments without compromising shock or spring travel. Features: - 25-Way damping force adjustment to adapt to a variety of driving conditions. - Monotube design with 46mm. diameter piston. - Adjustable lower case design that allows ride height to be adjusted without affecting preload. - Standardized 65mm. (ID) spring allows the use of a wide variety of readily available springs. - Front strut- type setups include camber adjustment plates that utilize premium quality pillow-ball spherical bearings to minimize deflection, binding, and noise. - GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation. - 100% Made in Japan, with precision Japanese components. | $ 2117.13 |
 | Blitz Damper ZZ-R (Coilover Kits) -92770 | ITEM DETAILS |
| Full length adjustable, single cylinder (monotube) coilover suspension with 32 levels of damper adjustment. | $ 951.20 |
 | Blitz Damper ZZ-R Spec-C (Coilover Kits) -93130 | ITEM DETAILS |
| Full length adjustable, single cylinder (monotube) coilover suspension with 2 way, 32 levels damper adjustment and separate tank. | $ 1501.63 |
 | Blitz Miracle Camber Adjuster (Coilover Kits) -92110 | ITEM DETAILS |
| Optional part for use with Blitz Damper ZZ-R. | $ 198.17 |
 | CUSCO Sport TN-R More Info (Coilover Kits) -692 64V CP | ITEM DETAILS |
| Race~Competition setting. For R-Comp tyres. Full length height adjustable. 2 way damping force adjustment (24 step extension side x 24 step contraction independent adjustment). TNS (Twin Needle System). Pillow ball upper mounts (on applicable models). CUSCO Blue Springs. | $ 1760.63 |
 | CUSCO Sport TN-S More Info (Coilover Kits) -692 64W CN | ITEM DETAILS |
| Street~Sports setting. For high grip radial tyres. Full length height adjustable. 2 way damping force adjustment (24 step extension side x 24 step contraction independent adjustment). TNS (Twin Needle System). Heavy Duty rubber upper mounts (on applicable models). CUSCO Blue Springs. | $ 1571.47 |
 | HKS HIPERMAX MAX IV GT 20SPEC (Coilover Kits) -80230-AF001A | ITEM DETAILS |
| Resetting of the HIPERMAX IV GT with the latest technology that balances handling performance and street comfort. It's perfect for daily street drive with style and performance. You and your passenger can have a comfortable ride even when lowered. Single Tube Damper Design Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. PNE Coating Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. "M Shaft" With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. New Design Needle Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. Reduction of Unsprung Weight In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium (Not for all vehicles). 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street or circuit. | $ 1132.88 |
 | HKS HIPERMAX MAX IV GT Spec-A (Coilover Kits) -80230-AF001V | ITEM DETAILS |
| Ultimate Street Damper with Latest Theory Based on MAX IV GT. "MAX IV GT Spec-A" was developed based on the thought of what is the best for a street sports damper, eliminating the harsh stereotype of aftermarket sports dampers. Experience the mild damping and profound ride feeling from the moment you start driving. Single Tube Damper Design Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. PNE Coating Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. "M Shaft" With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. New Design Needle Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. Reduction of Unsprung Weight In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium (Not for all vehicles). 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street or circuit. Secured Effective Stroke Length For a vehicle height adjustment type suspension, the wide adjustable range is one of advantages. "MAX IV GT" and "S-style" series have wider vehicle height adjustable ranges for a wide variety of purposes of use. However, for "MAX IV GT Spec-A", unused range for vehicle height adjustment is utilized in the effective stroke length for ride quality improvement and higher and more stable driving performance. New Design Bump Rubber Newly designed bump rubbers act as sub-springs across a wide bump range enabling the main spring rate to be reduced which provides the stable and superior driving performance. Rally driver Mr. Toshihiro Arai Rally driver Mr. Toshihiro Arai joined testing and his experience and feedback was utilized to finalize the setup. High ride quality and superior driving performance are implemented in an extremely high level. | $ 1091.30 |
 | OHLINS DFV Complete Kit (Coilover Kits) -(GL)SHCOOLGVB02 | ITEM DETAILS |
| Dual Flow Valve System. | $ 2090.21 |
 | OHLINS Road & Track Complete Kit (Coilover Kits) -(GL)SHCOOLGVB01 | ITEM DETAILS |
| $ 2213.16 |
 | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | ITEM DETAILS |
| $ 12.60 |
 | PROVA Resevoir Tank Cover (Other) -90000JL0200 | ITEM DETAILS |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
 | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | ITEM DETAILS |
| Mechanical lifter kit. | DISCONTINUED |
 | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | ITEM DETAILS |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.13 |
 | CUSCO Adjustable Rear Upper Arms (Rods and Control Arms) -965 474 L | ITEM DETAILS |
| $ 312.43 |
 | CUSCO Auto Leveliser Adjust Rod (Rods and Control Arms) -00B 628 C | ITEM DETAILS |
| Automatic Headlight Levelizer Adjustment Rod. The modern automobiles of today are equipped with an automatic headlight leveler that adjusts to the vehicle's ride height in real time. When the vehicle suspension is altered, (in most cases ride height lowered) the headlights are pointed down towards the ground. This is due to the leveler sensor being located only in the rear of the car. To counter this issue, CUSCO has engineered the AUTO LEVELIZER which allows axis adjustment so that the headlight trajectory can be corrected. In some cases, the settings in the ECU can readjust the headlights according to its vehicle height, however there are parameter limitations for the electronic sensors which will eventually require a mechanical approach to solve. | $ 35.59 |
 | CUSCO Rear Lateral Link (Rods and Control Arms) -692 474 LA | ITEM DETAILS |
| $ 251.96 |
 | CUSCO Rear Trailing Rod (Rods and Control Arms) -692 474 T | ITEM DETAILS |
| $ 199.80 |
 | MOONFACE Super Lap Bump Adjust Tie Rod Ends (Rods and Control Arms) -STE43 | ITEM DETAILS |
$ 155.02 |
 | MOONFACE Super Lap RC Joint (Rods and Control Arms) -SAB41 | ITEM DETAILS |
| Roll Center Joints. | DISCONTINUED |
 | RS-R Rear Lower Arm (Rods and Control Arms) -RLAF040 | ITEM DETAILS |
| Fully adjustable rear lower arms. Toe/Camber adjustment: Turn buckle (Heavy duty rubber bush). Knuckle side: 2 positions (Roll centre, damper stroke, ride height). Damper attachment: 3 positions (Damper stroke). Stabiliser link attachment: 2 positions (Stabiliser rate). Pair (Left and right). | $ 301.56 |
 | SILK ROAD Rear Lateral Links (Rods and Control Arms) -1D1-G05R | ITEM DETAILS |
| $ 226.76 |
 | SILK ROAD Rear Toe Rods (Rods and Control Arms) -1D1-G03 | ITEM DETAILS |
| $ 182.04 |
 | STi Lateral Link Set (Rods and Control Arms) -ST20250ZR000 | ITEM DETAILS |
| By replacing the rubber bushes with pillow ball bushes, these lateral links smoothen the movement of the rear suspension, decreases friction during movement stroke, as well as improves camber stiffness. This item can deliver sharp handling on corners and linear suspension characteristics from turn-in to acceleration at the exit. | $ 306.13 |
 | Blitz Strut Tower Bar (Strut Tower Bars) -96146 | ITEM DETAILS |
| $ 100.63 |
 | CUSCO Hybrid Strut Tower Bar (Strut Tower Bars) -692 542 A | ITEM DETAILS |
| Hybrid oval shaft. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Two center bar types are available, specifically set per application. Includes hybrid bushes. | $ 85.04 |
 | CUSCO Strut Tower Bar Type OS (Strut Tower Bars) -692 540 A | ITEM DETAILS |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. | $ 77.10 |
 | HKS Kansai Tower Bar (Strut Tower Bars) -KTF003 | ITEM DETAILS |
| $ 118.11 |
 | OKUYAMA CARBING Strut Tower Bar More Info (Strut Tower Bars) -631 514 0 | ITEM DETAILS |
| DISCONTINUED |
 | Subaru STi Flexible Tower Bar (Strut Tower Bars) -SG517FG101 | ITEM DETAILS |
| This is a strut tower bar with a completely new concept - splitting an aluminum tower bar in the center and connecting the two pieces with pillow ball joints. As the left and right pieces are flexibly connected, the bar can moderately handle longitudinal forces such as from gaps on the road to maintain ride comfort while strongly holding against lateral forces during cornering. As a result, not only cornering performance but also straight-line stability and ride comfort is improved to enhance the comprehensive performance level of the car. | $ 186.45 |
 | STi Damper Kit (Suspension Kits) -20310ZR020 + 20310ZR030 + 20365ZR010 x 2 + ST20330ZR020 x 2 + ST20380ZR050 x 2 | ITEM DETAILS |
| $ 2199.93 |
 | CUSCO CC Pillow Ball Upper Mounts (Upper Mounts) -692 63X 01SN | ITEM DETAILS |
| Camber and castor adjustable pillow upper ball mounts. | $ 209.88 |
 | STi Hub Unit Complete (Wheel Hubs/Knuckles) -28373ZR000 x 2 | ITEM DETAILS |
| JDM Group N complete wheel hubs. | $ 629.90 |
 | Blitz Racing Wheel Nut (Wheel Nuts) -14010 | ITEM DETAILS |
| High-strength nuts made from forged SCM435 chrome-molybdenum steel. Lightweight nuts, weighing just 47g each. Made in Japan. | $ 22.99 |
 | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | ITEM DETAILS |
| Inconel 625 complexe alloy steel wheel nuts. | $ 33.01 |
 | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | ITEM DETAILS |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.15 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | ITEM DETAILS |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | ITEM DETAILS |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 83.52 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | ITEM DETAILS |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 114.64 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | ITEM DETAILS |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 137.38 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | ITEM DETAILS |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 113.44 |
 | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | ITEM DETAILS |
| $ 218.89 |
 | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | ITEM DETAILS |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 27.81 |
 | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel bolts. | $ 40.03 |
 | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 35.84 |
 | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 43.46 |
 | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.15 |
 | WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | WORK Lock Nut Set (Wheel Nuts) -240254 | ITEM DETAILS |
| Robust steel lock nut set. The special lock nuts prevent tightening or removal with a regular torque wrench, helping to prevent theft. | $ 66.77 |
 | WORK RS Nut (Wheel Nuts) -240007 | ITEM DETAILS |
| This lightweight lock nut set is made from A6061-T6 material, which is also used in aircraft, and offers excellent strength and hardness. The anodized surface not only provides excellent corrosion and abrasion resistance, but its colorful design also adds a touch of fashionability, enhancing the dress-up effect. Thanks to its carefully calculated shape and design, the weight is 25g, less than half that of the average steel nut. The nuts are 21HEX, non-penetrating type with a total length of 34mm. The WORK logo "W" is featured on the top of the nuts and lock nuts. Pack of 20 (16 nuts, 4 lock nuts, 1 adapter wrench). | $ 84.72 |
Suspension Parts
 | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | ITEM DETAILS |
| $ 28.47 |
 | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | ITEM DETAILS |
| $ 27.46 |
 | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | ITEM DETAILS |
| $ 38.55 |
 | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | ITEM DETAILS |
| Spring type rear hatch/boot lid hooks. | $ 30.55 |
 | STi Front Under Spoiler (Front Spoilers (Lip Spoilers)) -ST96020ZR260 | ITEM DETAILS |
| $ 277.79 |
 | STi Skirt Lip (Front Spoilers (Lip Spoilers)) -ST96020ST011 (Old: ST96020ST010) | ITEM DETAILS |
| Both protects under spoiler while reducing aerodynamic drag. | $ 85.98 |
 | Subaru STi Front Under Spoiler (Front Spoilers (Lip Spoilers)) -SG517FG010 | ITEM DETAILS |
| $ 291.01 |
 | Garage Vary Universal Turbulator (Other) -30-4001 | ITEM DETAILS |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | $ 69.04 |
 | KENSTYLE Accent Screws (Other) -(GL)AS01 | ITEM DETAILS |
| Universal dress up accent screws. Ideal for completing the wide fender look. | $ 27.72 |
 | STi Door Handle Protectors (Other) -ST91099ST020 | ITEM DETAILS |
$ 42.83 |
 | STi STi Side Under Spoiler (Side Skirts/Steps) -ST96030ZR020 | ITEM DETAILS |
| $ 363.77 |
 | SARD GT Wing 014 More Info (Spoilers/Wings) -61554-1400 | ITEM DETAILS |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1410.98 |
 | SARD GT Wing 015 More Info (Spoilers/Wings) -61557-1610-Type1 | ITEM DETAILS |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1470.82 |
 | STi Dry Carbon Rear Spoiler (Spoilers/Wings) -ST96050ZR532 (Old: ST96050ZR530) | ITEM DETAILS |
| $ 2204.02 |
 | STi Gurney Flap (Spoilers/Wings) -ST96010ST000 | ITEM DETAILS |
| Actual vehicle wind tunnel tests at STI developed this product that increases downforce by manipulating the air received on the wing face, without increasing the air resistance (CD/drag). | $ 60.79 |
 | STi Trunk Spoiler (Spoilers/Wings) -ST96050ZR230 | ITEM DETAILS |
| $ 262.04 |
Wheels
 | STi Wheel Set BBS (STi) -ST281004S100 | ITEM DETAILS |
| Individual BBS forged aluminum wheel. Lightweight and highly rigid, it improves chassis performance. The unsprung weight has been reduced, and along with the lateral rigidity due to the wide trim, high followability to the road surface has been achieved. | $ 694.78 |
Other Parts
 | ORIGIN Front EX Canard (Exterior Parts) -W037-SET | ITEM DETAILS |
| Universal. Pair (Left and right). | $ 95.05 |
 | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET | ITEM DETAILS |
| Universal. Pair (Left and right). | $ 149.29 |
 | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | ITEM DETAILS |
| Universal. Pair (Left and right). | DISCONTINUED |
 | SARD Aero Blade (Exterior Parts) -61967 | ITEM DETAILS |
| Sold individually (1 piece). | $ 20.31 |
 | SARD Front Bumper Canard (Exterior Parts) -61965 | ITEM DETAILS |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
 | SARD Front Under Flap (Exterior Parts) -61966 | ITEM DETAILS |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
 | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | ITEM DETAILS |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | $ 38.68 |
 | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | ITEM DETAILS |
| $ 217.69 |
 | STi Fuel Cap Oranament (Premium) (Fuel Filler Caps) -STSG18100630 | ITEM DETAILS |
| Premium (high) octane gasoline petrol fuel cap sticker. | $ 14.11 |
 | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | ITEM DETAILS |
| Gas/Petrol cap cover. | DISCONTINUED |
 | Blitz i-Burner Expansion Kit (Globes) -14566 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz i-Burner Spark Lights (Globes) -14565 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Billet Oil Filler Cap (Oil Filler Caps) -24003-AK002 | ITEM DETAILS |
| Duralumin. | $ 51.15 |
 | PROVA Oil Filler Cap (Oil Filler Caps) -94000AH0100 | ITEM DETAILS |
| Designed to directly replace the Subaru OEM part (M42 x P4.5), this oil filler cap installs easily and provides improved usability for easier engine maintenance. Usage of engineering plastics keeps weight to a minimum while boasting excellent thermal resistance to survive under-hood conditions. The bolt installed in the middle of the cap permits loosening with a wrench for situations where the cap is tightly installed. The Prova logo and engine oil mark on the top surface along with the cap's deep black color help beautify the engine bay. Please note that the bolt is for loosening the cap only (not intended for tightening). Weight: 82g. | DISCONTINUED |
 | TOMEI Oil Filler Cap (Oil Filler Caps) -763007 | ITEM DETAILS |
| $ 48.00 |
 | TRUST GReddy Oil Filler Cap B-Type More Info (Oil Filler Caps) -13901506 GOC-B06 | ITEM DETAILS |
| Machined from aluminum. Comes with a special tool that is convenient when the cap is hot or when the cap is difficult to remove. Includes O ring/seal. | $ 45.73 |
 | STi Battery Holder (Other) -ST82182ST000 | ITEM DETAILS |
| $ 59.59 |
 | TRUST GReddy Cable Ties (Other) -18001742 | ITEM DETAILS |
| GReddy logo cable ties. | $ 14.19 |
 | HKS Emblem (Stickers and Emblems) -51003-AK027 | ITEM DETAILS |
| Silver. 87 x 35mm. | DISCONTINUED |
 | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | ITEM DETAILS |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | $ 15.75 |
 | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | ITEM DETAILS |
| ABS resin emblem of Tuned by HKS. Size：115mm x 19mm. | $ 28.22 |
 | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | ITEM DETAILS |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | $ 12.35 |
 | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | ITEM DETAILS |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | $ 12.35 |
 | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | ITEM DETAILS |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | $ 12.35 |
 | HKS Sticker - Metal Logo (Stickers and Emblems) -51007-AK231 | ITEM DETAILS |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | $ 12.35 |
 | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | ITEM DETAILS |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | $ 12.35 |
 | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | ITEM DETAILS |
| HKS logo on oil color. | $ 12.35 |
 | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | ITEM DETAILS |
| Tuned by HKS sticker. Hairline finish. | $ 12.35 |
 | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | ITEM DETAILS |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | $ 12.35 |
 | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | ITEM DETAILS |
| Small-sized transcription sticker. | $ 12.35 |
 | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. | $ 23.56 |
 | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | ITEM DETAILS |
| High brightness reflective sheet. | $ 24.76 |
 | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | ITEM DETAILS |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
 | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | ITEM DETAILS |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | $ 8.94 |
 | STi Emblem (Carbon) (Stickers and Emblems) -STSG12100910 | ITEM DETAILS |
| DISCONTINUED |
 | STi Emblem (Hairline) (Stickers and Emblems) -STSG15100240 | ITEM DETAILS |
| $ 16.85 |
 | STi Metal Plate (Stickers and Emblems) -STSG16101210 | ITEM DETAILS |
| Electroformed nickel, PET material. | $ 27.87 |
 | TOMEI 70 Sticker (Stickers and Emblems) -761031 | ITEM DETAILS |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | $ 9.76 |
 | TOMEI Emblem (Stickers and Emblems) -763000 | ITEM DETAILS |
| 120 x 22mm. | $ 19.65 |
 | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | ITEM DETAILS |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
 | Top Fuel Emblem (Stickers and Emblems) -26735831 | ITEM DETAILS |
| Metal plate emblem with engraved Top Fuel logo. | $ 12.28 |
 | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Towing Strap (Tow Hooks/Straps) -13890 | ITEM DETAILS |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 20.31 |
 | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | ITEM DETAILS |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | $ 33.07 |
 | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | ITEM DETAILS |
| $ 41.04 |
| HKS Kansai Tow Hook (Tow Hooks/Straps) -KHF015 | ITEM DETAILS |
| Ball lock type. Can be fixed at 0 and 90 degree angles. HKS Kansai logo on tow hook extension portion. Made in Japan. | $ 60.47 |
 | OKUYAMA CARBING Flip Up Tow Hook (Tow Hooks/Straps) -301 062 0 | ITEM DETAILS |
| Steel swivel tow hook for installation to standard tow hook hole. Can locked at 0degree/90degrees/180degrees positions to prevent from scratching car body. Drive vehicle on the street with the hook locked in folded position. | $ 163.52 |
 | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | ITEM DETAILS |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | $ 63.93 |
 | TOMEI Towing Strap (Tow Hooks/Straps) -763032 | ITEM DETAILS |
| Universal towing strap (belt). Maximum Towing Capacity: 3.0 tons. Loop Length: 10 cm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 42.33 |
 | BBS Air Valve Cap (Valve Caps) -P5615011 x 4 | ITEM DETAILS |
| Set of 4. | $ 19.84 |
 | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | ITEM DETAILS |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | $ 27.15 |
 | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC50 | ITEM DETAILS |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | $ 13.13 |
 | Project μ (Mu) Air Valve Cap (Old) (Valve Caps) -ACC-TC15 | ITEM DETAILS |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | DISCONTINUED |
 | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | ITEM DETAILS |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | $ 36.85 |
 | STi Valve Cap Set (Valve Caps) -ST28102ST030 | ITEM DETAILS |
| Set of 4. | $ 25.79 |
 | TRUST GReddy Air Valve Cap (Valve Caps) -18001996 | ITEM DETAILS |
| Aluminium air valve caps (Titanium gradation colour). 11mm x 11mm. Set of 4. | $ 15.43 |
Back | Back to TOPCan't find a part or not listed for your model?
Email: enquiries@greenline.jp
Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.
|
Customer Services Contact Us Purchasing Information International Shipping Payment Methods Currency Conversion |
Don't Miss Out Mailing List Specials Product Catalogue |
About Greenline About Greenline |
We specialise in shipping internationally!
And offer local delivery by special arrangement.
© Greenline Motorsports, 2002-2026 Terms and Conditions, Privacy Policy
A Gosaru Solution
