| Categories: | |
![]() | Apex APEXi AFC Neo (Engine Management) -401-A018 (Old: 401-A017) | |
| Colour Display Airflow Converter. Does not include APEXi General Purpose Stand. | DISCONTINUED |
![]() | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | |
| Super Air Flow Converter II. | DISCONTINUED |
![]() | Blitz R-FIT (Engine Management) -15120 | |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
![]() | Rs Racing Service RRP Super ECU (Engine Management) -E-400 | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Super ECU Harness (Engine Management) -E-401 | |
| DISCONTINUED |
![]() | TRUST GReddy E-01 (Engine Management) -15500208 | |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
![]() | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate More Info (Engine Management) -15500501 | |
| Engine Control Unit Manager ULTIMATE. The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of existing sensors, the ability to easily alter factory settings and not having to tune from scratch. Requires harness kit (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate Universal Harness Kit (Engine Management) -15901500 | |
| Universal harness. For applications where no car specific harness is available. 18P, 14P, 12P connectors and wiring set. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Universal Harness Kit Type 2 (Engine Management) -15901510 | |
| Universal harness. For applications where no car specific harness is available. With current reverse flow diode. 18P, 14P, 12P connectors and wiring set. | $ 106.71 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | |
| For use with Trust GReddy e-Manage Ultimate. | $ 45.73 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $ 26.33 |
![]() | TRUST GReddy v-manage (Engine Management) -15500551 | |
| Variable Valve Timing Manager. | DISCONTINUED |
![]() | TRUST GReddy v-manage Option Part (Engine Management) -15901601 | |
| DISCONTINUED |
![]() | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
![]() | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $ 350.60 |
![]() | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $ 166.29 |
![]() | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
![]() | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
![]() | Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | |
| DISCONTINUED |
![]() | Apex APEXi Smart Accel Controller (Other Controllers) -410-A001 | |
| Throttle controller. 7 throttle modes: ECO x 3, Low Throttle, Boost Mode x 2 and High Throttle. Automatically reverts to standard mode when transmission put in reverse. Single button operation (Indicated by colour). | $ 106.71 |
![]() | Apex APEXi Smart Accel Controller Harness (Other Controllers) -417-A010 | |
| For use with APEXi Smart Accel Controller. Car specific harness. | $ 40.19 |
![]() | Billion VFC II (Other Controllers) -BVTW-03 | |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $ 124.72 |
![]() | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | |
| Variable Fan Controller PRO DD. | DISCONTINUED |
![]() | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $ 22.87 |
![]() | Blitz E-ESC (Other Controllers) -16087 | |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
![]() | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | DISCONTINUED |
![]() | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | |
| $ 73.45 |
![]() | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | |
| $ 115.02 |
![]() | PIVOT 3-DRIVE BLP More Info (Other Controllers) -3-DRIVE-BLP | |
| Throttle controller with built in manual transmission auto-blipping function. Auto-Blipping removes the need for the conventional heel and toe technique used to raise rpm with the accelerator while braking at the same time in an attempt to prevent slipping and turbulent motion caused by rapid downshifts when sports driving in manual transmission model cars. This allows the driver to concentrate more on braking which in turn results in a more accurate and smoother deceleration. Operation is safe, as the Auto-Blipping function does not operate when accelerating without braking, or when a set speed has not been reached. The controller has three throttle modes to match your driving style and conditions whether driving for sport, driving on slippery roads, or driving with gas efficiency in mind: Normal Mode for regular response, Sports Mode with 7 steps for a quicker response, and ECO Mode with 3 steps for a slower response. The choice is yours. | $ 181.73 |
![]() | PIVOT 3-DRIVE Brake Harness More Info (Other Controllers) -BR-6 | |
| Option part for use with 3-DRIVE BLP for seamless bolt on installation. | $ 22.45 |
![]() | PIVOT 3-DRIVE Car Specialized Harness (Other Controllers) -TH-1A | |
| Car specific harness, for bolt on installation of PIVOT 3-DRIVE throttle controllers. | $ 34.64 |
![]() | PIVOT 3-DRIVE Clutch Harness (Other Controllers) -BR-2 | |
| Option part for use with 3-DRIVE BLP for seamless bolt on installation. | $ 22.45 |
![]() | PIVOT 3-DRIVE Compact More Info (Other Controllers) -THC | |
| High performance, low cost, all in a compact body. | DISCONTINUED |
![]() | PIVOT 3-DRIVE EVO (Other Controllers) -3DE | |
| Throttle controller with no OBD Connection necessary! All-in-One design means most value for your money. Compatible with Collision Mitigation Systems and Euro Cars. Easy Connection to Accelerator Connector - Simplified wiring prevents signal malfunctions caused by decreased voltage due to low-current circuitry. Suitable for use with OBD connected products - With no need for a power connection to the OBD, it is possible to use other OBD connected products without a splitter connection. Compact Controller Provides discrete standard-style installation - The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. 17 Step / 4 Mode Wide-Range Adjustment The four modes include: POWER mode with 7 steps for increasing response across all ranges, RESPONSE mode with 5 steps for increasing response, like a wire throttle, in the lower and middle ranges, ECO mode with 5 steps for suppressing rapid acceleration to help increase gas mileage, and NORMAL mode for regular driving. | $ 128.88 |
![]() | PIVOT 3-DRIVE Extension Cable (Other Controllers) -THC-EC | |
| 1m extension cable for 3-DRIVE Car Specialized Harnesses. For use with: PIVOT 3-DRIVE EVO, 3-DRIVE LIGHT, 3-DRIVE COMPACT and 3-DRIVE AC. | $ 15.24 |
![]() | PIVOT 3-DRIVE Flat More Info (Other Controllers) -THF2 | |
| Ultra thin compact throttle controller for a sleek, clean look. | DISCONTINUED |
![]() | PIVOT 3-DRIVE PRO (Other Controllers) -3DP | |
| Throttle controller with no OBD Connection necessary! Low-Profile Controller allows discrete installation. Compatible with Collision Mitigation Systems and Euro Cars. Easy Connection to Accelerator Connector - Simplified wiring prevents signal malfunctions caused by decreased voltage due to low-current circuitry. Suitable for use with OBD connected products - With no need for a power connection to the OBD, it is possible to use other OBD connected products without a splitter connection. Compact Controller Provides discrete standard-style installation - The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. 17 Step / 4 Mode Wide-Range Adjustment The four modes include: POWER mode with 7 steps for increasing response across all ranges, RESPONSE mode with 5 steps for increasing response, like a wire throttle, in the lower and middle ranges, ECO mode with 5 steps for suppressing rapid acceleration to help increase gas mileage, and NORMAL mode for regular driving. | $ 165.60 |
![]() | PIVOT 3-DRIVE X More Info (Other Controllers) -3-DRIVE-X | |
| World's first throttle controller with multi monitor for display of engine parameters. | DISCONTINUED |
![]() | PIVOT Fan Control Gauge (Other Controllers) -FCG | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Super Temp Controller (Other Controllers) -STC | |
| Fan controller with water or oil temperature display. | DISCONTINUED |
![]() | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $ 176.27 |
![]() | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | |
| DISCONTINUED |
![]() | TRUST GReddy Relay Kit (Other Controllers) -15901400 | |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $ 18.68 |
![]() | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | |
| DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | |
| For use with Okachan Water Temp oC. | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP (Performance Meters) -405-A012 | |
| The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. This new aesthetically pleasing model was crafted to match the likes of other highly popular APEXi electronics such as the VAFC (VTEC Controller) and the AVCR (Boost Controller). The new screen utilizes the easy to read VFD (Vacuum Fluorescent Display) with built in light sensor used in many of APEXi's line up. The new unit also delivers a host of new functions. Standard features include: Engine RPM, Vehicle Speed, Travel Distance, and Battery Voltage (All which can be displayed in real time graph mode, numerical mode, or analogue mode; 1-4 channels at a time.), Peak Hold, Replay (With 60 second playback.), Speed Limiter Cut, 0-100m, 200m, 400m times with trap speed, 0-100km/h, 200km/h, 300km/h times, 100km/h, 200km/h, 300km/h b 0 times, user defined Mid Range Acceleration, Stop Watch functions, Best Time Memory, RPM Warning, Speed Warning, RPM and Speed Outputs (For external devices requiring an RPM or speed signal.), Tire Size Correction (For acceleration and timing accuracy.), and Vehicle weight input. One of the most exiting of the new features is the option to utilize the revolutionary APEXi G-Sensor (Sold separately.). The G Sensor allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G on the race track, or used in an array of new features including: Highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, Horse Power Calculation, and Loss Power Calculation. By taking advantage of the optional G Sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel-spin. Using the G Sensor modifies the speed sensor signal, compensating for wheel-spin and producing impeccably accurate acceleration times. | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP G-Sensor (Performance Meters) -430-A013 | |
| An added feature to the Rev Speed Meter GP, the G-Sensor unit allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G's on the race track, or used in an array of new features including: highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, horse power calculation, and loss power calculation. By taking advantage of the optional G-sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel spin. The G-sensor modifies the speed sensor signal, compensating for wheel spin and producing impeccably accurate times. For use with APEXi Rev/Speed Meter GP (Sold separately). | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP Shift Lamp (Performance Meters) -430-A011 | |
| With the optional shift indicator light, you can easily incorporate shift points into an A'PEXi Rev Speed Meter-GP (Sold separately). | DISCONTINUED |
![]() | ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | |
| DISCONTINUED |
![]() | ARK Design Meter Stand (Performance Meters) -01-0106X-L | |
| DISCONTINUED |
![]() | ARK Design MFD (Performance Meters) -01-0003X-00 | |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
![]() | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | |
| DISCONTINUED |
![]() | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | |
| DISCONTINUED |
![]() | Blitz MMD i-Color (Performance Meters) -15062 | |
| Multi Function & Multi Angle Display. | DISCONTINUED |
![]() | Blitz Power Meter iD III (Performance Meters) -15086 | |
| DISCONTINUED |
![]() | Blitz Touch-B.R.A.I.N. (Performance Meters) -15158 | |
| OBD multi monitor that can display up to 50 items of vehicle information by simply connecting to the failure diagnosis connector (OBD). 3.5 inch touch panel type TFT liquid crystal adoption. It is also excellent in expandability. Simple install - simply connect to OBD part with connector. A variety of beautiful graphics. "Racing" emphasizing visibility, "3D" incorporating near future design - 56 kinds of rich display methods such as "Eco" to support econmical driving. For software version 1.30+, "TOYOTA HYBRID" exclusive communication is available - displays data specific to the hybrid vehicles that would not normally be available. Multi-angle display (left, vertical, right) screen switching. Special holder is included as standard equipment for various mounting positions. microSD card slot and USB port enables data linkage/software update with PC. Option features: - Data logging on USB memory/micro SD card, data analysis via Blitz DATA LOGGING SOFT (Free download). . Real time loggin is available with use of Blitz PC Link Cable - sold separately. By connecting Blitz Sensor Junction Box (sold separately), unit can display additional sensor data (sensors sold separately). Includes Universal Monitor Holder. | DISCONTINUED |
![]() | Blitz Touch-B.R.A.I.N. Option Part (Performance Meters) -15162 | |
| $ 16.63 |
![]() | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | $ 521.56 |
![]() | HKS A/F Sensor (Performance Meters) -44999-AK022 | |
| For use with HKS A/F Knock Amp 2/3. | $ 143.18 |
![]() | HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | |
| For use with HKS A/F Knock Amp 2/3. | $ 53.42 |
![]() | HKS CAC Cute (Performance Meters) -44007-AK002 | |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | $ 168.94 |
![]() | HKS CAMP (Performance Meters) -4801-SA001 | |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
![]() | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | |
| DISCONTINUED |
![]() | HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | |
| $ 66.77 |
![]() | HKS OB-LINK More Info (Performance Meters) -44009-AK001 | |
| Display/monitor car parameters from OB port via Bluetooth to your Android device (Not included, v2.1+). "Carscope" and "OB-BRIDGE" applications available for download from Google Play. | $ 81.76 |
![]() | HKS OB-LINK Type-001 More Info (Performance Meters) -44009-AK002 | |
| Connects to vehicle's OBD II connector for display of vehicle data on iOS/Android via Bluetooth. "Carscope" and "OB-BRIDGE" applications available for download from iTunes/Google Play. In addition, the information is logged within its internal memory, and can be setup and accessed via the HKS OB LINK Log Manager app (available from iTunes/Google Play). | DISCONTINUED |
![]() | PIVOT Speed Meter X (Performance Meters) -SML-X | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Speed Meter Z (Performance Meters) -SML-Z | |
| Discontinued. | DISCONTINUED |
![]() | SARD A/F Device (Performance Meters) -67502 | |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $ 611.13 |
![]() | SARD A/F Device A/F Sensor (Performance Meters) -67519 | |
| Part included with A/F Device (repair part). | $ 311.80 |
![]() | SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | |
| Part included with A/F Device (repair part). | $ 112.25 |
![]() | SARD A/F Device Sensor Fitting (Performance Meters) -67517 | |
| Part included with A/F Device (repair part). | $ 17.46 |
![]() | SARD Analyzer-II (Performance Meters) -67515 | |
| DISCONTINUED |
![]() | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
![]() | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | |
| For NA and Turbo. | DISCONTINUED |
![]() | Blitz ASTT-X (Turbo Timers) -14360 | |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-DCIV (Turbo Timers) -14369 | |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-X (Turbo Timers) -14362 | |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + (Turbo Timers) -15043 | |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
![]() | Blitz FATT-DCIV (Turbo Timers) -14368 | |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz FATT-X (Turbo Timers) -14361 | |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
![]() | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | |
| DISCONTINUED |
![]() | FET QRS III (Boss Kits) -FQS005 | |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
![]() | FET QRS III Steering Plate (Boss Kits) -FQS006 | |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
![]() | HKS Q-Release WB Rapfix II Keylock Set (Boss Kits) -51007-AK721 | |
| The Works Bell RAPFIX II KEYLOCK SET is now available in an HKS oil color. This set includes the RAPFIX II steering wheel detachment system, which provides the highest level of safety and convenience, born from the pursuit of speed, and the RAPFIX II KEYLOCK SYSTEM, which prevents vehicle theft and has an audible warning function. Comes with a cover for the key lock system to prevent scratches during storage and to prevent the key cylinder number from being read when installed. Steering boss kit to suit vehicle is required for installation (Sold separately). Vehicles with a steering angle sensor connector at 12 o'clock, such as the BNR32, cannot be used. Limited edition item. | $ 573.84 |
![]() | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | |
| $ 16.38 |
![]() | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | |
| DISCONTINUED |
![]() | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
![]() | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | |
| For use with regular boss kits (sold separately). | DISCONTINUED |
![]() | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $ 238.17 |
![]() | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | $ 32.64 |
![]() | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $ 203.78 |
![]() | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $ 44.72 |
![]() | Works Bell Boss Kit (Boss Kits) -414 | |
| Depending on vehicle, normal, airbag, and/or auto cruise types available. Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 68.34 |
![]() | Works Bell Rapfix Flipper (Boss Kits) -103260 | |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.79 |
![]() | Works Bell Rapfix GTC (Boss Kits) -103270 | |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $ 245.09 |
![]() | Works Bell Rapfix GTC-R (Boss Kits) -103282 | |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $ 276.53 |
![]() | Works Bell Rapfix II (Boss Kits) -103030 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 203.21 |
![]() | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | $ 120.31 |
![]() | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 231.87 |
![]() | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
![]() | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $ 157.70 |
![]() | Works Bell Rapfix Racing (Boss Kits) -103330 | |
| Steering wheel quick release system for competition cars. | $ 208.50 |
![]() | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $ 309.28 |
![]() | Works Bell Short Boss for Rapfix (Boss Kits) -414S | |
| Short type (low height) boss kit ideal for use with Works Bell Rapfix. Suitable for 70mm x 6 PCD (MOMO, OMP, SIMONI Racing) type steering wheels. | $ 100.47 |
![]() | Works Bell Wiring Plate (Boss Kits) -103284 | |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $ 18.27 |
![]() | SARD RD-1 (Clusters and Cluster Gauges) -67520 | |
| Racing Display 1. | DISCONTINUED |
![]() | STACK ST8100 (Clusters and Cluster Gauges) -67000 | |
| DISCONTINUED |
![]() | STACK ST8130 (Clusters and Cluster Gauges) -67003 | |
| DISCONTINUED |
![]() | STACK ST8130P (Clusters and Cluster Gauges) -67002 | |
| $ 1530.66 |
![]() | BRIDE Dress Up Floor Mat (Floor Mats) -FS022A | |
| $ 252.27 |
![]() | HKS Kansai Floor Mat (Floor Mats) -KYS001 | |
| Thick anti flammability material (FMVSS NO.302 test compliant) cut into shape to suit each specific vehicle type. Equipped with hoook holes and anti slip backing. Right hand drive models only. Made in Japan. | $ 103.56 |
![]() | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $ 48.09 |
![]() | Monster Sport Floor Mat (Floor Mats) -894500-4650M | |
| DISCONTINUED |
![]() | Blitz Meter Holder (Gauge Mounts) -19160 | |
| $ 17.13 |
![]() | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | |
| On dash type. | $ 118.74 |
![]() | Defi Fitting Kit (Gauge Mounts) -DF05301 | |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
![]() | HKS Display Stand (Gauge Mounts) -53002-AK001 | |
| $ 11.97 |
![]() | HKS Meter Cap (Gauge Mounts) -53002-AK002 | |
| $ 8.00 |
![]() | HKS Meter Hood (Gauge Mounts) -5404-SA001 | |
| $ 32.44 |
![]() | HKS Meter Stand (Gauge Mounts) -5404-SA006 | |
| DISCONTINUED |
![]() | Monster Sport Meter Pod (Gauge Mounts) -853140-4600M | |
| Gauge pod for additional gauges. | $ 165.98 |
![]() | Monster Sport Pillar Meter Hood (Gauge Mounts) -851510-4600M | |
| $ 128.88 |
![]() | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | |
| DISCONTINUED |
![]() | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | |
| Meter not included. Includes double sided tape. | DISCONTINUED |
![]() | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | |
| $ 95.49 |
![]() | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | |
| $ 507.57 |
![]() | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | |
| DISCONTINUED |
![]() | Project μ (Mu) Seat Belt Pad (Harnesses) -ACC-SP02 | |
| These seat belt pads feature a zipper closure for easy attachment and reduce the pressure of the seat belt digging into the body. Pair of 2. | $ 48.25 |
![]() | SARD 4 Point Harness (Harnesses) -80221 | |
| FIA-approved 4-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 233.38 |
![]() | SARD 6 Point Harness (Harnesses) -80223 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 317.15 |
![]() | SARD GR Aero Stabilizing Shoulder Pad (Harnesses) -76013 | |
| $ 29.61 |
![]() | SARD GR Racing Harness (6 Point) (Harnesses) -76023 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. | $ 478.72 |
![]() | SPOON SPORTS Racing Harness (Harnesses) -ALL-81450-000 | |
| $ 519.04 |
![]() | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | |
| $ 110.55 |
![]() | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | |
| $ 116.22 |
![]() | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | |
| DISCONTINUED |
![]() | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 243.30 |
![]() | TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 362.04 |
![]() | TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | |
| Set of 2. | $ 19.27 |
![]() | TAKATA FORMULA 6 (Harnesses) -73000-0 | |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | |
| 4 point harness. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
![]() | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA RACE 2x2 (Harnesses) -94005-0 | |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 484.71 |
![]() | TAKATA RACE 3x2 (Harnesses) -94004-0 | |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 379.83 |
![]() | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
![]() | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $ 487.70 |
![]() | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 (Harnesses) -72000-0 | |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 (Harnesses) -72004-0 | |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA Shoulder Pads (Harnesses) -SP-301 | |
| Pair. | DISCONTINUED |
![]() | TAKATA Stress Plate (Harnesses) -STP-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Shoulder Pad (Harnesses) -18001988 | |
| Pair. | $ 21.10 |
![]() | TRUST GReddy Sports Harness (Harnesses) -16500004 | |
| 4 x 4 point harness. | DISCONTINUED |
![]() | Blitz Hybrid Aircon Filter (Other) -18728 | |
| World's first aircon filter using light catalyst for deodrisation of air. Replacement for standard aircon filter. Along with anti-bacterial properties, filters against dust and pollen. Washable (air dry). | $ 30.55 |
![]() | OKUYAMA DASH Heel Adjust Plate (Other) -315 609 0 | |
| Driver's side floor plate. RHD vehicles only. | DISCONTINUED |
![]() | OKUYAMA CARBING Passenger Plate More Info (Other) -420 002 0 | |
| 3mm aluminium. Attatched to floor carpet by velcro tape. | $ 87.75 |
![]() | Suzuki Sport Carbon Meter Panel (Other) -852500-4650 | |
| DISCONTINUED |
![]() | LAILE Beatrush Driver Foot Rest (Pedals) -S48041DR | |
| In motor sports where intense Gs take place, a firmly, well planted left foot is a necessity. Anodized, drilled aluminium reduces chances of slipping. Pedal: Aluminium. Brackets: Steel. Right hand drive models only. | $ 39.37 |
![]() | Monster Sport Foot Rest Cover (Pedals) -841501-4650M | |
| $ 37.32 |
![]() | Monster Sport Foot Rest Set (Pedals) -849561-4650M | |
| Sports Foot Rest and Sports Driving Clutch Pedal set. | DISCONTINUED |
![]() | Monster Sport Sports Driving Clutch Pedal (Pedals) -846500-4650M | |
| Offsets and lowers clutch pedal to ideal sports driving position. | DISCONTINUED |
![]() | Monster Sport Sports Driving Pedal Covers (Pedals) -849500-4650M | |
| Sports driving pedal set. | $ 63.05 |
![]() | Monster Sport Sports Foot Rest (Pedals) -842561-4650M | |
| Footrest with raised position for accurate pedal operation and reduction of fatigue by maintaining a stable driving position during sports or long distance driving. | DISCONTINUED |
![]() | BRIDE FO Type Super Seat Rail (Seat Accessories) -S073FO | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA seats. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. | $ 144.75 |
![]() | BRIDE FX Type Super Seat Rail (Seat Accessories) -S073FX | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. Aluminium side brackets. Fixed type. FIA approved. | $ 146.14 |
![]() | BRIDE Import Side Stay (Seat Accessories) -A35NPO | |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $ 45.70 |
![]() | BRIDE MO Type Super Seat Rail (Seat Accessories) -S073MO | |
| For use with BRIDE reclinable seats. EUROSTER series, STREAMS series, DIGO series, ZAOU, edirb 032/054, edirb 110/132, EURO II series, BRIX (Old), ERGO (Old), XAX (Old), REVS. Also suitable for: - SPARCO - Star 2, Torino 2, Milano 2, Monza, Sportivo, Speed, Sprint. | $ 134.04 |
![]() | BRIDE RO Type Super Seat Rail (Seat Accessories) -S073RO | |
| For use with BRIDE reclinable seats. GIAS series, STRADIA series, deirb 023/033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, PROS. Super Low Position (maximum -30mm). Also suitable for: - RECARO - SR series, L series. - GULL (Love Lark). - D&W. Also suitable for (with BRIDE Import Side Stay - Sold separately): - RECARO - SPG-N. - Sparco - Corsa, Rev II, Pro 2000, Evo. | $ 120.66 |
![]() | BRIDE Side Stay (Seat Accessories) -A02NPO | |
| $ 32.31 |
![]() | BRIDE XL Type Super Seat Rail (Seat Accessories) -S073XL | |
| For use with BRIDE ZIEG IV WIDE, ZETA III type-XL seats. Super low position (maximum -30mm). | $ 171.52 |
![]() | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | |
| DISCONTINUED |
![]() | HKS Kansai Low Position Seat Rail (Seat Accessories) -KIS001 | |
| Optimises seating position of standard seats. Compatible with seat lifter and/or other functions of the standard seats. | $ 193.69 |
![]() | RECARO Side Protector (Seat Accessories) -7216966 | |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $ 61.10 |
![]() | Prodrive Competition Seat (Seats) -55660011 | |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
![]() | Monster Sport Shift Knob A Type (Shift Knobs) -831131-0000M (Old: 831130-0000M) | |
| Round type duracon shift knob. Diameter: 46mm. Height: 78mm. Thread length: 25mm. Weight: 85g. Includes 5 speed shift pattern emblem. | $ 48.09 |
![]() | Monster Sport Shift Knob A Type (Plug) (Shift Knobs) -83111-17350M (Old: 831110-7350M) | |
| Round type duracon shift knob. Plug type. Weight: 76g. Includes 5 speed shift pattern emblem and screw. | $ 51.08 |
![]() | Monster Sport Shift Knob AT Type (Shift Knobs) -831161-0000M (Old: 831160-0000M) | |
| Stick type duracon shift knob for automatic transmission models. Diameter: 39.5mm. Height: 78mm. M8 x 1.25. Thread length: 27mm. Weight: 85g. Black. Not suitable for models where shift lock cancel (on/off) button/lever is on shift knob. | DISCONTINUED |
![]() | Monster Sport Shift Knob B Type (Shift Knobs) -831141-0000M (Old: 831140-0000M) | |
| Stick type duracon shift knob. Diameter: 39.5mm. Height: 78mm. Thread length: 25mm. Weight: 85g. Includes 5 speed shift pattern emblem. | $ 48.09 |
![]() | Monster Sport Shift Knob B Type (Plug) (Shift Knobs) -831121-7350M (Old: 831120-7350M) | |
| Stick type duracon shift knob. Plug type. Weight: 76g. Includes 5 speed shift pattern emblem and screw. | $ 51.08 |
![]() | Monster Sport Shift Knob WR Type (Shift Knobs) -831120-0000M | |
| Round type duracon shift knob as used in JWRC cars. Diameter: 44mm. Height: 52mm. Thread: M12 x P1.25. Weight: 60g. Includes 5 speed shift pattern emblem. | DISCONTINUED |
![]() | TRUST GReddy Shift Knob A Type More Info (Shift Knobs) -14500571 (GSK-A01) | |
| Height adjustable aluminium shift knob. Includes 5 types of shift pattern sticker. | $ 48.82 |
![]() | IKEYA FORMULA Sequen Shifter (Shifter Kits) -(GL)INSKIKFZC31S01 | |
| Changes the normal shift pattern to sequential "I" (forwards and backwards) pattern. Full bolt on installation. Shift Indicator sold separately. | DISCONTINUED |
![]() | IKEYA FORMULA Sequen Shifter Boot (Shifter Kits) -(GL)INSKIKFZC31S01-BOOT | |
| DISCONTINUED |
![]() | IKEYA FORMULA Sequen Shifter Indicator (Shifter Kits) -(GL)INSKIKFZC31S01-SHIFT-S | |
| Option part for use with IKEYA FORMULA Sequen Shifter. Displays current gear. | $ 142.04 |
![]() | IKEYA FORMULA Series II Bracket (Shifter Kits) -(GL)INSKIKFZC31S01-BRACKET | |
| DISCONTINUED |
![]() | LAILE Beatrush Quick Shift (Shifter Kits) -S78041QSC | |
| DISCONTINUED |
![]() | LAILE Beatrush Quick Shift Lever (Shifter Kits) -S78041QS | |
| DISCONTINUED |
![]() | Monster Sport SS Shifter (Shifter Kits) -391500-4350M | |
| DISCONTINUED |
![]() | Suzuki Sports SS Shifter (Shifter Kits) -391500-4650 | |
| DISCONTINUED |
![]() | TM-SQUARE CAE Ultra Shifter (Shifter Kits) -TMUS-AG3711 | |
| Quick shift kit. In normal quick shift kits the shift lever from the fulcrum to the shift knob is shortened, and the shift stroke is suppressed. Although the stroke is reduced, shifting becomes heavy due to the lever ratio. This CAE Ultra Shifter uses a special shift lever made of aluminum that is longer than standard, and has a revised fulcrum position to suppress the stroke length while not making shifting heavy. In addition, by using pillow ball joint for lateral movement, the clearances are greatly reduced, making the shift feel more direct and extremely easy to operate. Due to the longer shift lever, the position of the shift knob is closer to the steering wheel. This shortens the distance from the steering wheel to the shift knob during shifting, improving drivability. | DISCONTINUED |
![]() | Blitz Sports Steering Wheel (Steering Wheels) -13530 | |
| DISCONTINUED |
![]() | CUSCO Racing Steering Wheel (Steering Wheels) -00B 763 A330 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 299.83 |
![]() | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
![]() | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | |
| D shape steering wheel. | $ 453.53 |
![]() | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | |
| Round shape steering wheel. | $ 535.42 |
![]() | MOMO MOD.08 (Steering Wheels) -M-58 | |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | $ 213.85 |
![]() | Nardi Personal Blitz (Steering Wheels) -P071 | |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
![]() | Nardi Personal Blitz Leather (Steering Wheels) -P075 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | $ 221.09 |
![]() | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 278.42 |
![]() | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 224.87 |
![]() | Nardi Personal Neo Grinta (Steering Wheels) -P024 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | $ 267.71 |
![]() | Nardi Personal Pole Position (Steering Wheels) -P002 | |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | $ 203.46 |
![]() | Nardi Classic Punching Leather (Steering Wheels) -N005 | |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | $ 203.46 |
![]() | Nardi Classic Smooth Leather (Steering Wheels) -N111 | |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | $ 278.42 |
![]() | Nardi Classic Suede Leather (Steering Wheels) -N115 | |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | $ 203.46 |
![]() | Nardi Personal Trophy (Steering Wheels) -P051 | |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | $ 240.94 |
![]() | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
![]() | SARD Steering - D-shape (Steering Wheels) -80219 | |
| 345 x 320 mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 310.54 |
![]() | SARD Steering - Semi Deep (Steering Wheels) -80227 | |
| 345mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 359.04 |
![]() | TOMEI MOMO MOD.08 (Steering Wheels) -763034 | |
| TOMEI x MOMO collaboration MOD.08 model steering wheel. The center mark is a chic grey, with the TOMEI logo embroidered on the spokes and the mark embroidered on the bottom of the grip. The included horn button also has a design unique to this collaboration. | $ 428.33 |
![]() | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 203.46 |
![]() | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | |
| Steering boss (hub) kit is required for installation (Sold separately). | DISCONTINUED |
![]() | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | $ 348.02 |
![]() | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 294.48 |
![]() | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 267.71 |
![]() | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | $ 37.98 |
![]() | Blitz SUS Power Air Cleaner More Info (Air Filters) -26171 | |
| Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. | DISCONTINUED |
![]() | Blitz SUS Power Core Type LM More Info (Air Filters) -56171 | |
| Filter colour: blue. | DISCONTINUED |
![]() | Blitz SUS Power Core Type LM Red More Info (Air Filters) -59171 | |
| Filter colour: red. | DISCONTINUED |
![]() | HKS Racing Suction (Air Filters) -70020-AS101 | |
| The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits. To maximise intake capacity, HKS has carefully revised their HKS Racing Suction Reloaded for each car model, delivering the ultimate intake system to further increase the power. Filters use the new hyper stealth frame, where the opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. | $ 212.59 |
![]() | HKS Racing Suction Reloaded (Air Filters) -70020-AS002 | |
| DISCONTINUED |
![]() | HKS Kansai RS-RD Fitting Kit (Air Filters) -KPS005 | |
|   | $ 119.18 |
![]() | HKS Kansai Suction Kit (Air Filters) -KPS004 | |
| DISCONTINUED |
![]() | Monster Sport Air Funnel Cleaner COMPE-PX (Air Filters) -213501-4650M | |
| DISCONTINUED |
![]() | Suzuki Sport Air Funnel Cleaner Compe (Air Filters) -212560-4650 | |
| DISCONTINUED |
![]() | Suzuki Sport Air Funnel Cleaner Compe-PX (Air Filters) -213501-4650 | |
| DISCONTINUED |
![]() | Suzuki Sport Front Bumper Air Duct (Air Filters) -711100-4650 | |
| Front bumper air intake. | DISCONTINUED |
![]() | Suzuki Sport Ram Air Induction Box (Air Filters) -215510-4650 | |
| DISCONTINUED |
![]() | Suzuki Sport Silicon Hose (Air Filters) -232500-4650 | |
| DISCONTINUED |
![]() | TRUST GReddy AIRINX B-Type (Air Filters) -12591001 (SZ-M001B) | |
| Car specific kit using a 3D hemispherical high efficiency filter body. Combined with the 2 layer filter, both filtering performance, and air flow efficiency are improved. | DISCONTINUED |
![]() | ZERO1000 Carbon Filter Shield (Air Filters) -913-C009 | |
| Option carbon filter heat shield for use with ZERO1000 power chamber filters (sold separately). Affixed with air filter hose band. | $ 63.87 |
![]() | ZERO1000 Power Chamber Type 2 (Air Filters) -102-S001 | |
| Carbon Type. POWER CHAMBER an intake system designed to improve engine power, torque and response by utilizing inlet airflow to the engine bay. TYPE-2 is composed of a premium carbon tube for the chamber section and polished aluminum pipes that enhance racing appearance to the engine bay as well as improve engine performance while reducing weight. POWER CHAMBER TYPE-2 provides you cool aspiring sound that you can never experience with ordinary intake systems and makes you feel fun in driving! | $ 196.34 |
![]() | Blitz SUS Power Air Filter LM (Air Filters (Panel/OEM) Type) -SS-24B 59572 | |
| Standard air filter replacement using dry type special fiber material (fabric) and mesh filter as used in proven SUS POWER core type air cleaners. Highly durable and strong due to the stainless steel coated material. In addition, the two layer structure reduces pressure loss, further improving suction efficiency while effective in collection of dust and other particles. | $ 25.35 |
![]() | HKS Super Air Filter More Info (Air Filters (Panel/OEM) Type) -70017-AS103 | |
| New standard (stock) replacement type air filter utilizing newly developed dry non-woven fabric filter. High dust collection capacity and low resistance are implemented together at a high level. | $ 23.97 |
![]() | HKS Super Hybrid Filter More Info (Air Filters (Panel/OEM) Type) -70017-AS003 | |
| 3 layered filter, with each layer serving a different function. Well balanced stock replacement type air cleaner for sporty quick engine response while being highly durable. | DISCONTINUED |
![]() | Monster Sport Power Filter 2 (Air Filters (Panel/OEM) Type) -SA16 | |
| DISCONTINUED |
![]() | Monster Sport Power Filter PFX300 (Air Filters (Panel/OEM) Type) -SD16 | |
| $ 37.32 |
![]() | Suzuki Sport Power Filter (Air Filters (Panel/OEM) Type) -SA16 | |
| DISCONTINUED |
![]() | TM-SQUARE Sports Intake Filter (Air Filters (Panel/OEM) Type) -TMIN-I01601 | |
| The TM-SQUARE sports intake filter is a genuine replacement type dry air filter that can easily improve the intake efficiency of the engine. The filter part has a three-layer structure in which highly durable non-woven fabric is sandwiched between nets, so the suction resistance is greatly reduced while securing the dust collection effect. In addition, the non-woven fabric uses TM-SQUARE's brand color, champion yellow, and the rubber frame uses the TM-SQUARE logo, so you can tell at a glance that it is a TM-SQUARE product. | $ 31.41 |
![]() | TRUST GReddy AIRINX GT (Air Filters (Panel/OEM) Type) -12592507 (SZ-7GT) | |
| High performance standard replacement (drop in) air cleaner/filter. Special high performance dry type fiber filter drastically improves intake efficiency. High rigidity and durability are achieved by using a steel net laminate structure. Rubber frame provides excellent sealing performance, keeping dust out. High performance and high quality, at a reasonable price. Direct swap for the genuine (stock) air filter, and can be easily replaced. | $ 28.69 |
![]() | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | |
| DISCONTINUED |
![]() | HKS Kansai Air Duct and In Mani Plate Set (Induction Boxes and Ducts) -KPS003 | |
| Carbon Air Duct and Carbon Intake Manifold Plate Set. | DISCONTINUED |
![]() | HKS Kansai Carbon Air Duct (Induction Boxes and Ducts) -KPS001 | |
| Air duct only. | DISCONTINUED |
![]() | HKS Kansai Carbon In Mani Plate (Induction Boxes and Ducts) -KPS002 | |
| Carbon Intake Manifold Plate. | DISCONTINUED |
![]() | LAILE Beatrush Intake Kit (Induction Boxes and Ducts) -S98041SPS2 | |
| Greatly reduces intake air temperature. Increased diameter and shape of suction pipe raises both power and torque across the entire rev range, greatly increase engine response. | $ 426.51 |
![]() | Monster Sport Air Induction Box 2 (Induction Boxes and Ducts) -215520-4650M | |
| Induction box designed to deliver air efficiently to Monster Sport Air Clerner COMPE (Sold separately). | DISCONTINUED |
![]() | Monster Sport Front Bumper Air Duct (Induction Boxes and Ducts) -8FBD05 | |
| For use with Monster Sport Air Induction Box and Air Cleaner COMPE. | $ 76.22 |
![]() | Monster Sport PFX Intake Kit (Induction Boxes and Ducts) -8FBP20 (Old: 8FBP10) | |
| Decreased intake resistance, improved dust collection efficiency and lower intake air temperature, result in strong power feeling and excellent throttle response. | DISCONTINUED |
![]() | Top Fuel Intake Duct Kit (Induction Boxes and Ducts) -IN-CFRP | |
| $ 194.64 |
![]() | TRUST GReddy Ram Air Duct (Induction Boxes and Ducts) -12595003 | |
| Increases air charge (pressure) by efficiently directing intake air. | DISCONTINUED |
![]() | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | DISCONTINUED |
![]() | SARD Sports Catalyzer (Catalytic Converters / Straight Pipes) -89700 | |
| Sports catalytic converter for high power and high response. Vehicle specific models feature either a 200/180cpsi large metal honeycomb structure cell (withstands 1200°C, made in Japan), heat plate (shield) precision welded into a unit designed to replace the standard unit. | DISCONTINUED |
![]() | TRUST GReddy Street Spec Front Pipe (Catalytic Converters / Straight Pipes) -10691001 | |
| DISCONTINUED |
![]() | MAXIM WORKS Exhaust Manifold (Exhaust Manifolds (NA) / Headers) -1100SE076 | |
| $ 999.34 |
![]() | Monster Sport 4-2-1 Twin Catalyzer Exhaust Manifold (Exhaust Manifolds (NA) / Headers) -255102-4650M | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Exhaust Manifold Cover (Exhaust Manifolds (NA) / Headers) -E32-208 | |
| $ 71.30 |
![]() | TODA Exhaust Manifold (Exhaust Manifolds (NA) / Headers) -18100-ZC3-100 | |
| $ 1101.07 |
![]() | TRUST GReddy Circuit Spec Exhaust Manifold (Exhaust Manifolds (NA) / Headers) -10590601 | |
| Manifold that emphasizes improving mid to high power and torque for circuit use. | DISCONTINUED |
![]() | TRUST GReddy Street Spec Exhaust Manifold and Front Pipe (Exhaust Manifolds (NA) / Headers) -10694001 | |
| DISCONTINUED |
![]() | TRUST GReddy Street Spec Exhaust Manifold, Front Pipe and Center Pipe Set (Exhaust Manifolds (NA) / Headers) -10695002 | |
| DISCONTINUED |
![]() | FUJITSUBO AUTHORIZE R (Exhaust Systems (Cat Back)) -550-81523 | |
| FUJITSUBO A-R exhaust systems are designed to handle all situations from city driving to sports driving, with a balance of sound, exhaust efficiency, and design. | $ 467.39 |
![]() | FUJITSUBO AUTHORIZE RM (Exhaust Systems (Cat Back)) -250-81521 | |
| $ 265.82 |
![]() | FUJITSUBO Super Ti (Exhaust Systems (Cat Back)) -450-81524 | |
| Titanium. | DISCONTINUED |
![]() | KAKIMOTO Racing Kakimoto R (Exhaust Systems (Cat Back)) -SS319 | |
| High quality sound with heavy bass. Suitable for high torque / high power applications. A balanced sound and performance, all-round type muffler. JASMA compliant. | $ 564.71 |
![]() | Monster Sport TYPE Sp-X Dual Muffler (Exhaust Systems (Cat Back)) -241590-4650M | |
$ 465.50 |
![]() | TODA Rear Muffler (Exhaust Systems (Cat Back)) -18000-ZC3-10R | |
| $ 544.23 |
![]() | TRUST GReddy Comfort Sports GT Slash Muffler (Exhaust Systems (Cat Back)) -10190701 | |
| Comfort Sports GTS. | $ 393.06 |
![]() | TRUST GReddy Power Extreme Ti-R Muffler (Exhaust Systems (Cat Back)) -10191050 | |
| DISCONTINUED |
![]() | Monster Sport Muffler Cutter Ti (Exhaust Tips) -765500-4650M | |
| Titanium exhaust tip(s). | DISCONTINUED |
![]() | Rs Racing Service RRP Super Front Pipe Kit (Front and Centre Pipes) -E-217 | |
| Designed to maximise exhaust efficiency. Stainless steel. | $ 215.49 |
![]() | TODA Center Pipe (Front and Centre Pipes) -18000-ZC3-1RF | |
| $ 878.71 |
![]() | TRUST GReddy Street Spec Center Pipe (Front and Centre Pipes) -10693001 | |
| Sports catalyzer center pipe. | DISCONTINUED |
![]() | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | |
| DISCONTINUED |
![]() | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | |
| DISCONTINUED |
![]() | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | |
| DISCONTINUED |
![]() | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $ 38.99 |
![]() | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $ 210.76 |
![]() | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
![]() | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | |
| $ 13.04 |
![]() | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $ 10.68 |
![]() | TRUST GReddy Reserve Tank (Breather Tanks) -12094301 | |
| DISCONTINUED |
![]() | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | |
| Universal gear oil cooler kit. | $ 792.41 |
![]() | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | |
| Universal differential oil cooler kit. | $ 776.35 |
![]() | TM-SQUARE Window Duct (Ducts and Ducting) -TMDF-A00501 | |
|   | $ 178.39 |
![]() | HKS S TYPE Intercooler Kit (Intercoolers) -13001-AS001 | |
| S TYPE is designed for street use; ideal for stock vehicles, lightly tuned vehicles, and for vehicles with stock replacement type turbines. The engine response under street driving and performance at a mid to high speed range are well-balanced. Core features: Inner fins 1. Short type - We have adopted short type that the pitch is optimized for fin shape, for small and light to improve the cooling efficiency. 2. Triangular straight type - We adopted triangular straight type for less pressure loss of air flow. Outer Fins (triangular louver type) - Cooling efficiency improved with louver because of the shorter length and angle of the fin. - Wide surface of louver make it more efficient in cooling. Aluminium polished piping type kits available for some models. | DISCONTINUED |
![]() | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
![]() | TRUST GReddy Oil Cooler Air Guide (Oil Coolers) -12491000 | |
| DISCONTINUED |
![]() | TRUST GReddy Oil Cooler Kit (Standard LS) (Oil Coolers) -12095261 | |
| DISCONTINUED |
![]() | TRUST GReddy Oil Cooler Kit (Standard Type) (Oil Coolers) -12094605 | |
| $ 401.56 |
![]() | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $ 23.56 |
![]() | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | |
| 1 piece. | DISCONTINUED |
![]() | ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | |
| 1 piece. | DISCONTINUED |
![]() | TRUST Gear Oil Pump (Other) -12004820 | |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $ 257.00 |
![]() | TRUST GReddy Washer Tank (Other) -13506101 | |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | $ 28.35 |
![]() | Blitz Racing Radiator Cap (Radiator Caps) -18561 | |
| BLITZ racing radiator cap that supports everything from light to hard tuned applications. The valve opening pressure of the pressure control valve is set to 127kpa (1.3kg/cm2) to maximize the cooling performance of the radiator. The pressure valve spring has a high accuracy of ± 0.1 kg/cm2 maintaining high accuracy under a strict management system. Rust-resistant stainless steel is used for the metal parts to improve durability. Silicon synthetic rubber, has high elasticity and has high heat resistance is used for the rubber packing. | $ 15.75 |
![]() | CUSCO High Pressure Radiator Cap More Info (Radiator Caps) -00B 050 B13 | |
| 1.3kg/cm2 (Boiling temp: approx 126.5°C. | $ 22.99 |
![]() | Monster Sport High Pressure Radiator Cap More Info (Radiator Caps) -ZZEC20 | |
| $ 28.35 |
![]() | Rs Racing Service RRP High Performance Radiator Cap (Radiator Caps) -E-307 | |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
![]() | Suzuki Sport High Pressure Radiator Cap (Radiator Caps) -4ZE36-C20 | |
| DISCONTINUED |
![]() | TM-SQUARE High Pressure Radiator Cap (Radiator Caps) -TMRC-HP1 | |
| $ 22.17 |
![]() | TRUST GReddy Radiator Cap (Radiator Caps) -13901003 | |
| The TRUST Greddy High Pressure Radiator Cap raises the boiling point by increasing the opening pressure of the main pressure valve compared to the standard cap. The temperature difference compared to the external temperature is increased reducing chances of overheating while improving cooling effect. 1.3 kg/cm2 (127kPa). Rust-resistant stainless steel body. Silicon rubber seal which is superior in heat and corrosion resistance. Made in Japan. | $ 19.53 |
![]() | Billion Super Solid Coolant Line (Radiator Pipes and Hoses) -BWL-61 | |
| DISCONTINUED |
| Monster Sport Silicone Radiator Hose (Radiator Pipes and Hoses) -265500-4650M | ||
| Heavy duty silicone rubber (VMQ). SUS201/301 hose bands (12.7mm thick). | DISCONTINUED |
![]() | SARD Radiator Hose (Radiator Pipes and Hoses) -79590U | |
| Silicone. 3 ply. | $ 62.36 |
| TM-SQUARE TM Silicone Radiator Hose Set (Radiator Pipes and Hoses) -TMSH-AE3111 | ||
| 4.5mm triple layer silicone radiator hose set. Includes Triton hose bands. Brilliant yellow silicone rubber on the outermost layer, highly rigid middle layer excellent for pressure resistance, and finally blue silicone rubber used in the inner most layer. | $ 85.81 |
![]() | Suzuki Sport Super Cooling Ventilator (Radiator Shrouds (Hoods)) -797550-4650 | |
| DISCONTINUED |
![]() | Blitz Racing Radiator Type ZS (Radiators) -18851 | |
| All polished aluminium model. 42mm wide (2 core). - Low cost, lightweight, all aluminium radiator. Possible by new manufacturing method. - 42mm thick core and large tanks makes for substantial increase in cooling capacity. Designed for use with standard electic fans and shrouds (some models may require some modifications for fitting). - Polished finish on tanks. - 1/8PT sensor attachment hole. - New type outer fin enhances heat dissipation. - Designed specifically for each vehicle type, with optimised tube pitch (angle). - Anodised drain bolt and BLITZ radiator cap are included. | $ 328.18 |
![]() | HKS Kansai Aluminium Radiator (Radiators) -KWS400 | |
| All aluminum radiator. Includes Kansai Service radiator cap (127kPa). | DISCONTINUED |
![]() | HPI Radiator Evolve (Radiators) -HPARE-ZC31S | |
| Aluminium. 2 core (wide tube). | DISCONTINUED |
![]() | KOYO High Pressure Radiator Cap (Radiators) -SK-C13 | |
| Rust resistant stainless steel and chrome plated finish. Special synthetic rubber that is resistant to heat and corrosion. 1.3 kg/cm2 (127kPa). | $ 20.13 |
![]() | KOYO Type-M Radiator (Radiators) -KV101969R | |
| Aluminium 2 row 36mm. All aluminium type. Thin type core for easy bolt on installation in tight spaces, all without impairing cooling performance. | $ 370.14 |
![]() | Rs Racing Service RRP Sports Radiator (Radiators) -E-301 | |
| $ 580.77 |
![]() | SARD Racing Radiator (Radiators) -29048 | |
| Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. | DISCONTINUED |
![]() | Top Fuel All Aluminium Large Volume Radiator (Radiators) -(GL)CLRD-TPF-ZC31S-01 | |
| All aluminum radiator. Made in Japan. | $ 790.84 |
![]() | SARD Reserve Tank (Reserve Tanks) -29700 | |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $ 91.97 |
![]() | Billion Super Thermo (Thermostats) -BSSZ-43 | |
| Low temp thermostat. Suppresses over heating and loss of power by maintaining optimum engine water temperature. This low temp thermostat that opens approx 10~20°C (Depending on application) earlier than the standard thermostat. | $ 47.09 |
![]() | Monster Sport Low Temp Thermostat (Thermostats) -263352-9880M | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Middle Temp Thermostat (Thermostats) -E-300 | |
| $ 35.59 |
![]() | SARD Cooling Thermo (Thermostats) -19416 | |
| Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | $ 49.45 |
![]() | Suzuki Sport Low Temp Thermostat (Thermostats) -263352-9880 | |
| DISCONTINUED |
![]() | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | |
| Universal transmission oil cooler kit. | $ 829.89 |
![]() | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | |
| Universal compact transmission oil/power steering fluid cooler. | $ 321.25 |
![]() | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | |
| Universal transmission or differential oil cooler kit. | $ 524.71 |
![]() | Advance Black Alternator (Alternators) -BA-M90 | |
| High power, low resistance, better cooling. DENSO SC stator coil. Black body, red or blue aluminium pulley. | $ 318.87 |
![]() | Rs Racing Service RRP Hyper Kevlar Belt (Belts and Chains) -E-603 | |
| Reinforced belt with greatly improved durability, heat resistance, slip resistance, and abrasion resistance. | $ 35.34 |
![]() | Monster Sport Heavy Duty Valve Springs (Camshaft and Valvetrain Parts) -124100-4650M | |
| $ 85.98 |
![]() | Rs Racing Service RRP Big Valve Kit (Camshaft and Valvetrain Parts) -E-118 | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Heavy Duty Valve Springs (Camshaft and Valvetrain Parts) -E-106 | |
$ 153.13 |
![]() | Rs Racing Service RRP Inner Shim (Camshaft and Valvetrain Parts) -E-108-210 | |
| Inner shim for use with R's Racing Service RRP Valve Lifters. | $ 7.97 |
![]() | Rs Racing Service RRP Lightened Valve Lifter Kit (Camshaft and Valvetrain Parts) -E-107 | |
| $ 215.49 |
![]() | Monster Sport High Flow Camshaft (Camshafts and Camshaft Kits) -119500-4650M | |
| Intake and exhaust camshafts. | DISCONTINUED |
![]() | Rs Racing Service RRP High Performance Camshaft (Camshafts and Camshaft Kits) -E-105 | |
| DISCONTINUED |
![]() | TODA High Power Profile Camshaft (Camshafts and Camshaft Kits) -14111-M16-001 | |
| $ 190.86 |
![]() | TODA Inner Shim Kit (Camshafts and Camshaft Kits) -14730-M16-00T | |
| Outer to inner shim type lifter conversion kit. Removes weight from the moving parts of the valve train, reducing inertia and friction, allowing the engine to rev higher. For high lift camshafts (10.5~12.0mm). | $ 453.53 |
![]() | TOMEI PROCAM Camshaft (Camshafts and Camshaft Kits) -14C0240090 | |
| DISCONTINUED |
![]() | TOMEI PONCAM Camshaft Kit (Camshafts and Camshaft Kits) -143076 | |
$ 417.62 |
![]() | Monster Sport High Performance Conrods (Connecting Rods and Parts) -141500-4650M | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Racing Conrods (Connecting Rods and Parts) -E-123 | |
| DISCONTINUED |
![]() | Monster Sport Carbon Look Plug Cover (Covers) -925500-4350M | |
| DISCONTINUED |
![]() | Suzuki Sport Carbon Look Plug Cover (Covers) -925500-4350 | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Engine Mount Urethane Support (Engine Mounts) -S-401 | |
| $ 89.76 |
![]() | Rs Racing Service RRP Heavy Duty Engine and Transmission Mount (Engine Mounts) -S-400 | |
| $ 261.72 |
![]() | TM-SQUARE Heavy Duty Engine Mount (Engine Mounts) -TMEM-AF3502 | |
| $ 96.48 |
![]() | Blitz Fuel Pump (Fuel Pumps) -31255 | |
| DISCONTINUED |
![]() | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | |
| DISCONTINUED |
![]() | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | |
| DISCONTINUED |
![]() | SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | |
| DISCONTINUED |
![]() | SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | |
| DISCONTINUED |
![]() | SARD Fuel Filter (Fuel Pumps) -58254 | |
| $ 4.03 |
![]() | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | |
| $ 194.32 |
![]() | SARD Pump Harness Kit (Fuel Pumps) -58253 | |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $ 55.12 |
![]() | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | $ 225.82 |
![]() | Rs Racing Service RRP Racing Fuel Rail (Fuel Rails) -E-126 | |
| DISCONTINUED |
![]() | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $ 90.58 |
![]() | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
![]() | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $ 81.89 |
![]() | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $ 156.85 |
![]() | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $ 40.44 |
![]() | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
![]() | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 118.11 |
![]() | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 92.60 |
![]() | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | |
| $ 283.46 |
![]() | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | |
| Mount bracket. | $ 32.88 |
![]() | Auto Staff Insulation Gasket (Gaskets) -AS-INGK-SUZ2 | |
| Heat insulating gasket that uses a special material to be used between the intake manifold and the engine block. Intake manifold temperature is suppressed, increasing intake efficiency as heat generated from the engine block is not transmitted to the intake manifold as easily. | $ 45.83 |
![]() | Monster Sport Reinforced Metal Head Gasket (Gaskets) -171107-9720M | |
| $ 142.67 |
![]() | Power Enterprise Heavy Metal Gasket (Gaskets) -(GL)ENGK-PRE-M16A-01 | |
| The definitive version of metal gaskets, with a track record of use in WRC and touring car applications. | $ 130.26 |
![]() | Rs Racing Service RRP Super Cool Insulation Gasket (Gaskets) -E-121 | |
| Intake manifold gasket. | $ 66.61 |
![]() | Rs Racing Service RRP Super Metal Head Gasket (Gaskets) -E-109 | |
| Heavy duty metal head gasket with perfect sealing performance improvement and extremely high durability for the cylinder block and cylinder head. Special coating on the gasket surface ensures perfect adhesion to the cylinder head and cylinder block to prevent water and oil leaks. | $ 146.20 |
![]() | TODA High Stopper Metal Head Gasket More Info (Gaskets) -12251-M16-106 | |
$ 177.00 |
![]() | Monster Sport Titanium Exhaust Manifold Plate (Heat Shields and Heat Wrap (Bandages)) -8FCS20 | |
| DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | |
| Voltage stabiliser and earthing system. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $ 91.59 |
![]() | mature HIGHSPARK Ignition Coil (Ignition System Parts) -(GL)ENIP-MAU-SUZ-03 | |
| Specially tuned ignition coils with modified coil design that raises the secondary voltage output. By outputting a high and stable secondary voltage, engine quietness, increased torque and response idle/low rpm, and high output during acceleration. | $ 111.87 |
![]() | OKADA Projects Plasma Direct (Ignition System Parts) -SD262021R | |
| Ignition coil with a built in high power amplifier. Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Plug and play installation. Compatible with OBD-II (On-Board-Diagnostics). | $ 340.15 |
![]() | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | |
| DISCONTINUED |
![]() | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | |
| DISCONTINUED |
![]() | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | |
| DISCONTINUED |
![]() | PIVOT SPARK EARTH (Ignition System Parts) -SES | |
| DISCONTINUED |
![]() | SARD Magic Box (Ignition System Parts) -62311 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | SARD Sweeper (Ignition System Parts) -62310 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | TM Works High-Performance Coil (Ignition System Parts) -TM16140 x 2 | |
| Ignition coil that increases ignition power and realizes high efficiency of combustion! | $ 146.14 |
![]() | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | |
| DISCONTINUED |
![]() | Rs Racing Service RRP 360cc Injector (Injectors) -E-405 | |
| DISCONTINUED |
![]() | SARD 380cc Injector (Injectors) -63568 | |
| $ 97.63 |
![]() | CUSCO Oil Catch Tank More Info (Oil Breather Tanks) -616 009 A | |
| Car specific kit. | $ 63.75 |
![]() | CUSCO Reduce Lead Valve (Oil Breather Tanks) -619 729 AN | |
| Control blow-by gas generated in engine combustion process. Engine response & torque increased as well as reduction in shift shock. In the crankcase of a reciprocating engine, non combustible gases (generally called blowby gas) is always generated during the combustion stroke. The CUSCO Reduce Lead Valve works to control this blowby gas properly and reduces the load on the engine to improve the engine response and torque. In addition, the shift shock is reduced and the noise of the engine is also reduced to achieve a higher level of smoothness and a better sporty driving experience. The 1 way valve opens and closes in response to crank pulsation reducing the pressure inside the crankcase which in turn reduces the rotational resistance of the crank. By using a reed type valve system, the flow of the blowby gas is not obstructed, which is different from conventional slide valve systems. Service parts (valves) can be replaced when performance degraded due to deterioration due to age (Sold separately). | $ 194.64 |
![]() | CUSCO Replacement Lead Valve (Oil Breather Tanks) -(GL)619 729 AN-Repair | |
| Repalcement valve(s) for CUSCO Reduce Lead Valve. | $ 30.35 |
![]() | LAILE Beatrush Oil Catch Tank (Oil Breather Tanks) -S98041CT | |
| $ 158.55 |
![]() | SARD Oil Catch Tank (Oil Breather Tanks) -29300 | |
| Oil catch (breather) tank kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | |
| Universal kit. 1000ml. | $ 92.60 |
![]() | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | |
| Universal kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | |
| Hose for use with TRUST GReddy Breather Tanks. | $ 10.90 |
![]() | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | |
| Universal kit. 680ml. | $ 87.24 |
![]() | HKS Oil Filter (Oil Filters) -52009-AK010 | |
| New concept oil filter improves oil pressure drop and flow properties. The oil pressure drop and flow properties are improved by approximately 30% compared to current sports oil filters. The stress on the engine is reduced for better engine response. Utilizing the filter original designed for HKS Oil Filter and increasing its filter surface area by 15%, compared with a conventional product, greatly improved particle collection performance. HKS Oil Filter's minimum particle size is 20μ compared with 25μ of JIS standard which corresponds to the filtration performance requirement of most engines. Filter replacement is recommended every 10,000 km or 6 months under the normal driving environment. For sports and/or race use, it is recommend to replace filters every 3,000 km ~ 5,000km. | $ 16.13 |
![]() | Monster Sport Power Filter PFX100 High Performance Oil Filter (Oil Filters) -68SZ | |
| Power Filter PFX100 is a performance filtered derived from engine development engineers after research and development. Oil pressure drop reduced to approx 15% while exhibiting the same high dirt collection performance as a normal filter. It stabilizes the hydraulic pressure even in the harsh sports driving scene and contributes to engine protection. | $ 21.16 |
![]() | Monster Sport Power Filter Ti-100 (Oil Filters) -68SU | |
| Titanate Fiber Oil Filter. | DISCONTINUED |
![]() | TM-SQUARE Oil Filter (Oil Filters) -TMOL-VO2902 | |
| The TM-SQUARE oil filter features a short case with a height of 50mm that is compatible with sandwich blocks. These are high-performance filters that provides reliable dust collection without interfering with flow rate. | $ 19.99 |
![]() | Monster Sport JRC Oil Pan Baffle System (Oil Pans (Sumps) and Baffle Plates) -164100-4650M | |
|   | $ 211.96 |
![]() | Rs Racing Service RRP Oil Pan Baffle Plate (Oil Pans (Sumps) and Baffle Plates) -E-122 | |
|   | $ 123.78 |
![]() | TM-SQUARE Oil Pan Sports Baffle Plate (Oil Pans (Sumps) and Baffle Plates) -TMRS-H01501 | |
| DISCONTINUED |
![]() | Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 0W-20 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 5W-30 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 10W-40 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 15W-50 SL/CF. 4 litres. | $ 67.40 |
![]() | Billion Racing PS Tank (Other) -BRPS-090 | |
| Power steering fluid tank. | DISCONTINUED |
![]() | Rs Racing Service RRP Oil Level Gauge Hook (Other) -E-115 | |
| Hook for preventing the oil level gauge of the from coming off. When the engine is rotated at high speed, the blow-by pressure may rise and the oil level gauge may rise due due to deterioration over time. This item that will give you peace of mind from street to circuit driving applications. | DISCONTINUED |
![]() | Monster Sport Forged Piston Kit (Piston Kits and Parts) -193500-4650M | |
| $ 690.69 |
![]() | Monster Sport M19 Kit (Piston Kits and Parts) -139500-4650M | |
| 1884cc stroker piston kit. | DISCONTINUED |
![]() | Rs Racing Service RRP Racing Forged Piston Kit (Piston Kits and Parts) -E-116 | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Racing Forged Piston Kit II (Piston Kits and Parts) -E-130 | |
| DISCONTINUED |
![]() | TODA High Power Profile Piston Kit (Piston Kits and Parts) -13050-M16-B00 | |
| Forged piston kit. | $ 596.52 |
![]() | TODA Power Liner Kit (Piston Kits and Parts) -11102-M16-003 | |
| $ 1303.89 |
![]() | LAILE Alternator Pulley (Pulleys) -S98401PB | |
| Duralumin A7075. | DISCONTINUED |
![]() | LAILE Crank Pulley (Pulleys) -S98401PA | |
| Duralumin A7075. | DISCONTINUED |
![]() | Monster Sport Low Friction Water Pump Pulley (Pulleys) -8FAS20 | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Racing Water Pump Pulley (Pulleys) -E-312 | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Ultra Light Pulley Kit (Pulleys) -E-104 | |
| DISCONTINUED |
![]() | TODA Lightweight Front Pulley Kit (Pulleys) -13810-M16-HAC | |
| Developed to give lighter and sportier engine characteristic. By reducing the overall weight (and inertia) of the pulleys, and by modifying the alternator pulley ratio to take advantage of the more sporty use, the burden on the engine is reduced helping to improve acceleration performance. A good affinity material is used on the oil seal face of the crank pulley to reduce friction improving sealing and to reduce wear. | $ 341.41 |
![]() | Nagai Denshi ULTRA Blue Point Plug Wire (Spark Plug Leads) -3734-40 | |
| Ideal for extracting maximum performance from modern spark plugs (iridium etc). Silicone rubber covered cable, boots, and caps (cobalt blue colour), is excellent at withstanding voltage, and heat resistance. The copper core wire features excellent conductivity, and with the three layer structure of silicone core, glass braid (sheath) and silicone rubber cloth (like that featured in the conventional silicone series), these wires can withstand voltages of 150,000 V or more. Matched to modern spark plug characteristics, "Blue point power plug cords" are low resistance cords. Low uniform resistance value of 0.5 KΩ (Less than 1/2 of the conventional Ultra Silicone wires) for each cylinder. These wires also incorporate of line resistance technology (noise prevention device). With the low resistance value of 0.5 kΩ, the winding type noise suppressor (resistance) efficiently cuts noise by the effect of the L (inductance) component. Moreover, by adopting ultra unique proprietary noise suppressor at the end of the plug cord, a uniform resistance value is realized for each cylinder, and by adopting a low resistance value of 0.5 kΩ, the maximum spark energy is supplied without loss. The low resistance value of 0.5 kΩ per cylinder is best matched to plug with R (register) and iridium plugs. | DISCONTINUED |
| Nagai Denshi ULTRA Silicone Power Plug Wire (Spark Plug Leads) -3734-10 | ||
| High conductivity copper core wires. Using winding fixed resistors developed for each type of vehicle, these wires extract, and supply the maximum, uniform spark energy for each cylinder regardless of the length of the cord. Winding resistance is set in the boot of both cord terminals, and noise is efficiently eliminated by the noise source. Ultra's original construction method combined with the copper core wire creates a wire with excellent tensile strength. The pure silicone rubber outer cover provides excellent weather resistance and can withstand high voltages, providing durability that often exceeds the life of the car. | $ 81.26 |
![]() | Suzuki Sport Racing Plug Cord (Power Ignition 900) (Spark Plug Leads) -272500-9700 | |
| DISCONTINUED |
![]() | HKS Super Fire Racing M (Spark Plugs) -50003-M35I | |
| M Series. Improved ignition performance, durability and anticarbon build-up. The Ultimate sparkspark plug for increasing performance of tuned or stock engines. Iridium and platinum spark plug. | $ 17.98 |
![]() | HKS Super Fire Racing Pro (Spark Plugs) -5408-R40I | |
| Centre electrode: Iridium 0.4mm. Tip: Platinum 0.8mm. | DISCONTINUED |
![]() | HKS Super Fire Racing S (Spark Plugs) -5408-S30I | |
| S Series. Iridium spark plug. | DISCONTINUED |
![]() | Suzuki Sport GTI Spark Plug (Spark Plugs) -271175-0000 | |
| DISCONTINUED |
![]() | TRUST GReddy Racing Plug (Iridium Tune) More Info (Spark Plugs) -13000077 | |
| These spark plugs are designed standard to highly modified engines. The center electrode on these plugs are iridium alloy, which provide stronger spark even at lower voltage, beneficial for creating power and response. 0.6mm high refraction iridium alloy center electrode. Nickel “project type” ground electrode. NA engines can expect an increase across the rpm range, and turbo engines can expect lower end torque. Sold individually (Single unit). | $ 17.70 |
![]() | TRUST GReddy Racing Plug PRO More Info (Spark Plugs) -13000127 | |
| Iridium center electrode and platinum outer electrode. Sold individually (Single unit). | DISCONTINUED |
![]() | TRUST GReddy Racing Plug PRO (Platinum) More Info (Spark Plugs) -13000138 | |
| Designed to dissipate extra heat created by increased horsepower engines. This plug type has high durability for wide range of high heat conditions. 0.8mm platinum center electrode and nickel outer electrode. Sold individually (Single unit). | $ 16.19 |
![]() | Monster Sport Super Charger MX160 Kit (Supercharger Kits) -193590-4651M | |
| Kit Includes: Super charger assembly, intake manifold, suction pipe, air conditioner piping, brake piping, belt pulley assembly, switch harness assembly, brackets, special ECU (require original ECU unit for rewrite) and spark plugs. | DISCONTINUED |
![]() | Rs Racing Service RRP Super Charger Kit EVO II (Supercharger Kits) -E-101 | |
| Super charger, super charger oil cooler, reserve tank, oil filter, intake pipe, installation kit, and sub computer. | DISCONTINUED |
![]() | TRUST Supercharger Kit (Supercharger Kits) -11591500 | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Big Throttle Kit (Throttle Bodies and Intake Parts) -E-207N | |
| $ 618.88 |
![]() | HKS Bolt On Turbo Kit (Turbocharger Kits) -11001-AS001 | |
| DISCONTINUED |
![]() | TRUST Toyota 380cc Injector Set (Turbocharger Kits) -23209-74220 x 4 | |
| $ 468.65 |
![]() | TRUST GReddy Turbo Kit (Turbocharger Kits) -11590407 (Old: 11590402) | |
| DISCONTINUED |
![]() | TRUST GReddy Turbo Kit Oil Pan (Turbocharger Kits) -11992002 | |
| DISCONTINUED |
![]() | Monster Sport Heavy Duty Push Rod (Clutch Parts) -392100-4650M | |
| Heavy duty item (competition use) for use with aftermarket clutches that have increased clamping force, which increase chances of damage to standard (plastic push rod). | DISCONTINUED |
![]() | Rs Racing Service RRP Heavy Duty Clutch Pivot Rod (Clutch Parts) -D-101 | |
| Replaces the standard plastic pivot rod with this heavy duty steel item. | $ 36.72 |
![]() | Rs Racing Service RRP Heavy Duty Release Bearing (Clutch Parts) -D-115 | |
|   | $ 41.89 |
![]() | Rs Racing Service RRP Heavy Duty Release Shaft II (Clutch Parts) -D-102A | |
| Reinforced release shaft, twice as strong as the standard item. | $ 104.88 |
![]() | Rs Racing Service RRP Heavy Duty Release Shaft II Plus (Clutch Parts) -D-102B | |
| Reinforced release shaft, twice as strong as the standard item. Includes reinforced (heavy duty) release bearing. | $ 142.67 |
![]() | Suzuki SST Clutch Release Bush Remover (Clutch Parts) -09922-46010 | |
|   | $ 17.01 |
![]() | CUSCO Clutch Cover (Clutches) -00C 022 B616 | |
|   | $ 132.53 |
![]() | CUSCO Copper Disc (Clutches) -00C 022 R616 | |
| Copper clutch disc. | $ 93.73 |
![]() | CUSCO Copper Single Set (Clutches) -616 022 F | |
| Copper Single Disc and Clutch Cover Set. | $ 203.08 |
![]() | CUSCO Metal Disc (Clutches) -00C 022 C616S | |
| Metal clutch disc. | $ 138.07 |
![]() | CUSCO Metal Set (Clutches) -616 022 G | |
| Metal Disc and Clutch Cover Set. | $ 242.89 |
![]() | EXEDY Single Sports Series Clutch Cover (Clutches) -SC13T | |
| $ 141.10 |
![]() | EXEDY Single Sports Series Clutch Disc (Clutches) -SD13H | |
| $ 112.44 |
![]() | EXEDY Single Sports Series Clutch Set (Clutches) -SK02H | |
| Disc and cover set. Approximately 40% higher clamp load than the standard clutch. | $ 235.58 |
![]() | EXEDY Hyper SINGLE VF (Clutches) -SH01SDV | |
| Various Friction. Metal and Organic (Ultra Fiber) damper type disc. Includes flywheel. Capable of handling a high torque capacity without sacrificing the feel of a standard clutch. Combination of cerametallic & organic friction facings allows for high heat durability. Unique cushioning plate design reduces pedal effort by 12% vs Hyper Single. 20 to 30% reduction in inertia vs OEM. 225mm disc models rated to 500Nm (approx 370 ft lbf). 200mm disc models rated to 300Nm (approx 220 ft lbf). Suitable for: Street Modified / Track day. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | $ 931.62 |
![]() | JUN Single Sports Clutch Kit (Clutches) -2511M-S003 | |
| Lightweight flywheel, clutch disc and heavy duty clutch cover kit. | $ 535.42 |
![]() | Monster Sport Sports Clutch Set (Clutches) -311520-4650M | |
| DISCONTINUED |
![]() | ORC Metal Series ORC-209 (Clutches) -ORC-209D-SZ0101 (ORC-209DB-SZ0101) | |
| Single Plate Clutch. | $ 715.31 |
![]() | ORC Light Series ORC-250-Light (Clutches) -ORC-250L-SZ0101 | |
| The fun of a manual transmission car is not only higher output and drifting, there is also the pleasure of comfortable operation by the driver. However, until now, the enjoyment of the reinforced clutch was a little different due to being difficult to use. This single plate clutch unit has the same operation feeling as the standard clutch. ORC's Light Clutch series is are clutches that allows the engine to run lightly, maintaining the fun of changing gears while providing good feel in semi engaged conditions. | $ 649.55 |
![]() | TODA Heavy Duty Clutch Cover (Clutches) -22300-M16-000 | |
|   | $ 137.60 |
![]() | TODA Heavy Duty Clutch Release Push Rod (Clutches) -46948-M16-000 | |
| Stainless steel replacement of standard plastic push rod. | $ 26.77 |
![]() | TODA Metal Clutch Disc (Clutches) -22200-M16-00M | |
|   | $ 143.49 |
![]() | TODA Non Asbestos Clutch Disc (Clutches) -22200-M16-00N | |
|   | $ 97.45 |
![]() | TODA Sports Clutch Kit (Metal Disc) - Balanced (Clutches) -26000-M16-00M | |
| Lightweight chromoly flywheel, clutch disc and heavy duty clutch cover (Balanced). | DISCONTINUED |
![]() | TODA Sports Clutch Kit (Non Asbestos) - Balanced (Clutches) -26000-M16-00N | |
| Lightweight chromoly flywheel, clutch disc and heavy duty clutch cover (Balanced). | $ 570.44 |
![]() | CUSCO LSD Initial Torque Check Tool (SST) (Differential Parts) -LSD SST 08 | |
| Limited slip differential initial torque check tool. Pricing for 1 unit (2 required for use). | $ 58.58 |
![]() | ATS Carbon LSD (Differentials) -CKFB8711 | |
| $ 997.76 |
![]() | ATS Metal LSD (New Type-R) (Differentials) -RKFB8711 | |
| New design provides strong but controlable lock and improved response to the the original LSD. Developed and tested in endurance races, sprint races, All Japan Gymkhana & Dirt Trial Championship events, the unique structure spreads oil over the entire plate maintaining performance in extreme conditions. Ideal oil lubrication is achieved by removal of the radial oil groove of the conventional outer claw plate. The new oil slow-through type S-type plates combine a polishing plate without distortion and an inner claw plate carved with a concentric grooves. Centrifugal force slowly moves the oil from the inside to the outside along the grooves, providing extremely ideal lubrication for LSD with high locking performance. By holding the oil on the friction surfaces with the concentric grooves, lock performance difference between when cold and warm is successfully minimised. By matching the polishing plate and the non-polishing plate (grooving/inner claw), the lock drag when the accelerator is off is halved. As a result, the transition time lag from free to lock is also halved to achieve a sharp and crisp lock feel. Combining with a sharp cam angle of 60 degrees and 70 degrees, the instant lock when the accelerator is applied realises a feel close to the lock reaction at the time of high initial or diff lock. Rough accelerator control is possible even during cornering because you do not feel the sudden lock reaction allowing for seamless, supple control experience. | $ 753.99 |
![]() | CUSCO Compact LSD Type RS (Differentials) -LSD 617 H | |
| LSD designed specifically for compact cars. Stable traction for street to circuit applications. RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. | $ 554.31 |
![]() | CUSCO LSD Type RS More Info (Differentials) -LSD 617 F | |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 554.31 |
![]() | CUSCO LSD Type RS Spec F More Info (Differentials) -LSD 617 FT | |
| Flat Friction Disc Type (For smoother/milder actuation). RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 554.31 |
![]() | KAAZ LSD (Differentials) -DBS1610 | |
| Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 718.34 |
![]() | KAAZ LSD Super Q (Differentials) -DBS1610SQ | |
| All the features of KAAZ standard type LSD with WPC treated clutch discs for further durability. Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 777.23 |
![]() | Monster Sport LSD (Differentials) -361154-4650M (Old: 361152-4650M) | |
| DISCONTINUED |
![]() | OS Giken Super Lock Dual Core ST (Differentials) -(GL)D-SZ202061404-DCST | |
| By using a new mechanism that maintains lock timing, the OS Giken Dual Core ST is effective for reducing traction due to in-lift on tight mini-circuits, gymkhana courses. | $ 878.08 |
![]() | Suzuki Sport LSD (Differentials) -365500-4650 | |
| Traction Drive 100. | DISCONTINUED |
![]() | Monster Sport Drive Shaft Set (Driveshafts) -371502-4650M | |
| DISCONTINUED |
![]() | Rs Racing Service RRP Final Gear Set More Info (Final Drive Gears) -D-112A | |
| Racing final gear set. | $ 501.72 |
![]() | Rs Racing Service RRP Heavy Duty High 5th Gear Kit (Final Drive Gears) -D-113 | |
| $ 325.34 |
![]() | Top Fuel Final Gear Set (Final Drive Gears) -(GL)DTFG-TPF-ZC31S-01 | |
| $ 668.32 |
![]() | CUSCO Super Lightweight Chromoly Flywheel (Flywheels) -619 023 A | |
| $ 331.96 |
![]() | EXEDY Single Sports Series Flywheel (Flywheels) -SF04 | |
| $ 294.48 |
![]() | JUN Light Weight Flywheel (STD) (Flywheels) -2001M-S001 | |
| The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | $ 278.42 |
![]() | JUN Light Weight Ultralight Flywheel (HS) (Flywheels) -2010M-S001 | |
| The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | $ 299.83 |
![]() | Monster Sport Chromoly Flywheel (Flywheels) -331101-4650M | |
| DISCONTINUED |
![]() | Monster Sport Flywheel Intallation Kit (Flywheels) -339200-4350M | |
| New parts recommended for use when installing Monster Sport Chromoly Flywheels. | DISCONTINUED |
![]() | Rs Racing Service RRP Light Weight Flywheel (Flywheels) -D-104 | |
| $ 262.35 |
![]() | SILK ROAD Chromoly Light Weight Flywheel (Flywheels) -FW33 | |
| Light weight, direct replacement flywheel made from chromoly steel. Suitable for use with standard clutch disc and cover. | $ 247.36 |
![]() | TM-SQUARE Light Weight Flywheel (Flywheels) -TMFW-U02601 | |
| $ 327.89 |
![]() | TODA Ultra Light Weight CrMo Flywheel (Flywheels) -22100-M16-000 | |
| Lightweight chromoly steel flywheel. | $ 264.56 |
![]() | CUSCO Adjustable Stabiliser Links (Anti Roll (Sway/Stabiliser) Bars) -00B 318 B30 | |
| Adjustable type front stabilizer (sway bar) link, that maximises the effect of the front stabilizer! Stabilizer angle can be corrected to proper angle according to lowered ride heights to provide more linear effect. | $ 135.37 |
![]() | CUSCO Stabiliser Bar More Info (Anti Roll (Sway/Stabiliser) Bars) -616 311 AJ23 | |
| Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. | $ 166.61 |
![]() | Monster Sport MSE Adjustable Anti Roll Bar (Anti Roll (Sway/Stabiliser) Bars) -625100-4650M | |
| $ 491.64 |
![]() | Monster Sport MSE Adjustable Anti Roll Bar Tool (Anti Roll (Sway/Stabiliser) Bars) -625190-0000M | |
| For use with Monster Sport adjustable anti roll bars. Designed to match the width of the adjustment blade so that stiffness can be easily adjusted. | $ 33.73 |
![]() | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 24.57 |
![]() | APP Brake Line System (Brake Lines) -SB118B-ST | |
| $ 138.64 |
![]() | ENDLESS Brake Lines (Swivel Racing Type) (Brake Lines) -EB803 | |
| Designed for hard use and high durability without wasting pedal force improving brake pedal response. Steel and SUS304 stainless construction ensures excellent reliability with improved anti corrosion properties. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: SUS304 Stainless. Socket: SUS304 Stainless. | $ 236.84 |
![]() | ENDLESS Brake Lines (Swivel Steel Type) (Brake Lines) -EB803SS | |
| Steel and stainless construction ensures durability and excellent reliability. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: Carbon Steel. Socket: Stainless. | $ 164.72 |
![]() | Project μ (Mu) Teflon Brake Lines (Brake Lines) -BLS-008AC | |
| Teflon hose, covered with stainless mesh hose, and PVC outer tube. | $ 167.55 |
![]() | TM-SQUARE Brake Line System (Brake Lines) -TMBL-T311 | |
|   | $ 202.78 |
![]() | TRUST GReddy Brake Line Kit (Brake Lines) -15092101 (SZ001) | |
| Teflon hose, covered with stainless mesh hose. | DISCONTINUED |
![]() | DIXCEL EC Type (Brake Pads) -EC 371 039 | |
| EXTRA Cruise. Street/Winding (Normal) use. 0~450°. NAO (Non Asbestos Organic material). Low dust, squealing and rotor wear. Ideal for upgrade from standard pads. | $ 43.84 |
![]() | DIXCEL ES Type (Brake Pads) -ES 371 039 | |
| EXTRA Speed. Street/Winding (Normal)/Winding (Hard) use. 0~600°. NAO (Non Asbestos Organic material). Ideal for highway/winding sports driving. | $ 49.13 |
![]() | DIXCEL M Type (Brake Pads) -M 371 039 | |
| Street/Winding (Normal) use. 0~500°. Non Asbestos Ceramic material. Super low dust. Ideal for users who want low dust and higher control. | $ 89.82 |
![]() | DIXCEL R01 Type (Brake Pads) -R01 371 039 | |
| Ultra low heat conduction racing compound. For N1 racing, tarmac rallying and circuit use. 200~900°. HD (High Density) Graphite metallic material. Initialμ: 0.48, Averageμ: 0.38~0.43. | $ 135.18 |
![]() | DIXCEL Special Endurance Compound R30S More Info (Brake Pads) -R30S 335 112 | |
| Special Order Series. For Super Taikyu (Endurance) racing. Extremely hard touch that lasts the distance and excellent in stability. Also good compatibility with slit rotors, so that braking can be improved while maintaining sufficient wear resistance. Sintered metal material. Initialμ: 0.36, Averageμ: 0.32~0.35. | $ 356.90 |
![]() | DIXCEL RA Type (Brake Pads) -RA 335 112 | |
| High performance, linear control racing compound. Race/rally/circuit use. 200~900°. Carbon semi metallic material. Initialμ: 0.51, Averageμ: 0.40~0.45. | $ 155.33 |
![]() | DIXCEL RD Type (Brake Pads) -RD 335 112 | |
| Rear specific compound. Gymkhana/drift/rally/dirt trial use. Sinterred metallic material. μ: 0.55~0.60 (At operating temperature). For application where rear wheel locki is desired. | $ 170.45 |
![]() | DIXCEL RE Type (Brake Pads) -RE 371 039 | |
| ABS specific high performance, linear control racing compound. Ideal for sprint race/rally/circuit use. 200~900°. Carbon semi metallic material. Initialμ: 0.51, Averageμ: 0.40~0.45. | DISCONTINUED |
![]() | DIXCEL RN Type (Brake Pads) -RN 371 039 | |
| Rear pad compound specific for FF vehicles. N1 racing/Circuit use. Non asbestos material. Lower μ rsults in better overall balance and prevention of locking. | $ 109.98 |
![]() | DIXCEL S Type (Brake Pads) -S 371 039 | |
| Street/Winding (Normal/Hard) use. 0~700°. Non Asbestos low steel material. Offers a good balance of initial effectiveness and touch. The definitive street and sports pad! | $ 78.23 |
![]() | DIXCEL Specom Beta More Info (Brake Pads) -BE 335 112 | |
| Racing compound as used in Super Taikyu (Endurance) racing. Consistent pedal touch and control over long operation periods providing driver with confindence. Carbon semi metallic material. Initialμ: 0.48, Averageμ: 0.40~0.43. | $ 230.92 |
![]() | DIXCEL X Type (Brake Pads) -X 335 112 | |
| Street/Winding (Normal)/Off road use. Ideal for heavier cars, mini van, SUVs and large wheel applications. 0~700°. Graphite metallic. | $ 94.86 |
![]() | DIXCEL Z Type (Brake Pads) -Z 371 039 | |
| Street to circuit use. 0~850°. Graphite metallic material. High stopping power and controlable all round performance compound. | $ 115.02 |
![]() | ENDLESS CC-Rg (Brake Pads) -EP430CRG2 | |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $ 121.57 |
![]() | ENDLESS CC32 (Brake Pads) -EP430CC32 | |
| Circuit Compound. Low steel. 50~650°C. Average friction coefficient: 0.30~0.32. | $ 125.98 |
![]() | ENDLESS CC33 (S55G) (Brake Pads) -EP430CC33 | |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.28~0.33. | DISCONTINUED |
![]() | ENDLESS CC35 type-E (N84M) (Brake Pads) -EP430CC35E | |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.30~0.35. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 228.02 |
![]() | ENDLESS CC38 (ME22) (Brake Pads) -EP430CC38 | |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.33~0.38. Based on the CC40 (ME20) compound, this variation with slightly lowered friction coefficient, allows for more control. Ideal for medium weight vehicles with high breaking loads or heavy vehicles on low speed circuits. | $ 142.99 |
![]() | ENDLESS CC40 (ME20) (Brake Pads) -EP430CC40 | |
| Circuit Compound. Semi metallic. 0~650°C. Average friction coefficient: 0.22~0.28. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 142.99 |
![]() | ENDLESS CC43 (N35S) (Brake Pads) -EP430CC43 | |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.40~0.43. These brake pads deliver stable performance even under high temperatures and high loads, especially when used continuously with heavy vehicles, putting a large strain on the brakes. They pads are recommended for high-powered vehicles driving on circuits, where increased braking performance is desired. The material provides excellent control and stable braking force, enough to be used in the WRC. They also feature excellent release control with a moderate pedal stroke and a tactile feel. - Circuit driving for heavy vehicles weighing approximately 2 tons. - Circuit driving for high-powered vehicles. | $ 136.06 |
![]() | ENDLESS CC60 (N30C) (Brake Pads) -EP430CC60 | |
| Circuit Compound (Rally Use). Semi metallic. 150~800°C. Average friction coefficient: 0.50~0.60. | $ 139.52 |
![]() | ENDLESS MX72 (Brake Pads) -EP430MX72 | |
| Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $ 132.91 |
![]() | ENDLESS MX72 PLUS (Brake Pads) -EP430MXPL | |
| Street~circuit use. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~750°C. Average friction coefficient: 0.39~0.47. | $ 137.95 |
![]() | ENDLESS MXRS (Brake Pads) -EP430MXRS | |
| Street~circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.38~0.47. | DISCONTINUED |
![]() | ENDLESS NA01-rear (NC44) (Brake Pads) -EP312NA01 | |
| Circuit Compound. Semi metallic. 100~600°C. Average friction coefficient: 0.22~0.29. Designed for use on rear of front wheel drive (FF) vehicles. | $ 131.65 |
![]() | ENDLESS NEW Type R (Brake Pads) -EP430TRN | |
| Winding road/circuit. Material: Low steel. Brake rotor operating temperature: 50~650°C. Average friction coefficient: 0.30~0.35. Ideal tyre: radial/high grip radial. | DISCONTINUED |
![]() | ENDLESS SNP (Brake Pads) -EP430SNP | |
| Street. NAO compound (Non-Asbestos-Organic). 0~400°C. Average friction coefficient: 0.35~0.41. | DISCONTINUED |
![]() | ENDLESS SR01 (Brake Pads) -EP430SR01 | |
| Sports pad with excellent controllability that is suitable for everything from city riding to driving events. Braking power from the moment you start driving. Street~circuit use. Material: Low steel. Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.35~0.40. | $ 117.79 |
![]() | ENDLESS SSM (Brake Pads) -EP430SSM | |
| Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | DISCONTINUED |
![]() | ENDLESS SSM PLUS (Brake Pads) -EP430MP | |
| Super Street M-Sports PLUS. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~550°C. Average friction coefficient: 0.33~0.40. | $ 132.91 |
![]() | ENDLESS SSS (Brake Pads) -EP430SS2 | |
| Super Street S-Sports. Street. Non asbestos. 0~480°C. Average friction coefficient: 0.38~0.45. | $ 82.52 |
![]() | ENDLESS SSY (Brake Pads) -EP430SY2 | |
| Super Street Y-Sports. Street. Non asbestos. 0~400°C. Average friction coefficient: 0.35~0.45. | $ 56.06 |
![]() | ENDLESS Type R (Brake Pads) -EP430TR | |
| Winding road/circuit. Material: Non asbestos. Brake rotor operating temperature: 0~650°C. Average friction coefficient: 0.35~0.44. | DISCONTINUED |
![]() | ENDLESS W-003 (Brake Pads) -EP430W003 | |
| Circuit. Ceramic Carbon Metal. 200~850°C. Average friction coefficient: 0.40~0.45. | $ 215.43 |
![]() | Project μ (Mu) B-SPEC (Brake Pads) -F890-BSP | |
| Street Sports. Reliable braking power and fade resistance suitable for sports driving, all at a reasonable price. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 75.02 |
![]() | Project μ (Mu) BESTOP (Brake Pads) -F890-BESTOP | |
| Genuine type. Asbestos free. 0~380°C. Friction coefficient: 0.30~0.38. | $ 41.01 |
![]() | Project μ (Mu) CLUBMAN SINTERED (Brake Pads) -F890-ClubmanSintered | |
| Circuit Race. Ideal for clubman racing or amateur endurance racing. Designed for high durability and heat resistance experienced during high load circuit racing. Material: Super alloy sintered. Temperature range: 350~1000°C. Friction coefficient: 0.28~0.35. | DISCONTINUED |
![]() | Project μ (Mu) COMP-B for Gymkhana (Brake Pads) -F890 GYM | |
| Compound dedicated to the gymkhana competition, pursuing the pleasure of freely controlling the vehicle. Competition. Carbon metal. Front: 0~450°C. Friction coefficient: 0.38~0.49. Rear: 0~400°C. Friction coefficient: 0.48~0.60. | DISCONTINUED |
![]() | Project μ (Mu) D1 Spec (Brake Pads) -R389-D1SP | |
| Competition. Asbestos free. 0~380°C. Friction coefficient: 0.50~0.55. | $ 56.12 |
![]() | Project μ (Mu) D1 Spec ZERO (Brake Pads) -R389-D1Z | |
| Achieves brake control according to pedaling force by reducing changes in effectiveness and touch with respect to temperature. A low mu model that specializes in controllability in extreme conditions during drifting. Competition. Super Graphite Metallic. 0~550°C. Friction coefficient: 0.27~0.34. | $ 75.02 |
![]() | Project μ (Mu) NS-C (Brake Pads) -F890-NSC | |
| Street. Non steel. 0~400°C. Friction coefficient: 0.34~0.38. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | $ 65.57 |
![]() | Project μ (Mu) RACING 777 (Brake Pads) -F890-R777 | |
| Circuit Race. Carbon metal. 300~800°C. Friction coefficient: 0.40~0.55. | $ 122.26 |
![]() | Project μ (Mu) RACING 999 (Brake Pads) -F890-R999 | |
| Circuit Race. Carbon metal. 200~800°C. Friction coefficient: 0.42~0.59. | $ 122.26 |
![]() | Project μ (Mu) RACING-N+ (Brake Pads) -F890-RNPL | |
| Circuit Race. Super Graphite Metallic. 100~800°C. Friction coefficient: 0.39~0.48. | $ 112.82 |
![]() | Project μ (Mu) RACING-N1 (Brake Pads) -F890-RN1 | |
| Circuit Race. Carbon metal. 100~800°C. Friction coefficient: 0.33~0.45. | $ 112.82 |
![]() | Project μ (Mu) RACING-N1 FFR (Brake Pads) -R389-RacingN1-FFR | |
| Specially designed for the easy to lock up rears on FF cars. Circuit Race. Super graphite metallic. 100~600°C. Friction coefficient: 0.29~0.35. Formerly N1-RACING for FF Rear. | DISCONTINUED |
![]() | Project μ (Mu) SL-Metal (Brake Pads) -R389-SL | |
| Competition. Full metal pad that provides sharp lock performance for drift and gymhkhana, with no drop off in performance, even in the later stages of competition. Super alloy sintered. 0~400°C. Friction coefficient: 0.50~0.70. | $ 145.88 |
![]() | Project μ (Mu) Type HC-CS (Brake Pads) -F890-CS | |
| Hyper Carbon - Circuit Spec. Street Sports. Carbon metal. 50~800°C. Friction coefficient: 0.41~0.50. | $ 112.82 |
![]() | Project μ (Mu) Type HC-M1 (Brake Pads) -R389-M1 | |
| Hyper Carbon M1. The flagship model of the HC series that covers everything from city driving to sports driving. In addition to the linear effect of the pedal control, it exhibits outstanding and stable braking power in the high temperature range. These pads have been finished with specifications that suppress dust as much as possible among graphite metal materials. Street Sports. Super graphite metallic. 50~800°C. Friction coefficient: 0.41~0.55. | $ 122.26 |
![]() | Project μ (Mu) Type HC+ (Brake Pads) -F890-HCPL | |
| Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. | $ 112.82 |
![]() | Project μ (Mu) Type HC+ R3 (Brake Pads) -R389-R3 | |
| Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. Significantly improved fade resistance of the HC series, covers everything from street to sports driving. In addition to stability in the high temperature range, this compound also allows greater pedal control by taking into account the characteristics of recent electronic control devices and ABS intervention. | $ 122.26 |
![]() | Project μ (Mu) Type PS (Brake Pads) -F890-PS | |
| Street Sports. Perfect Spec. Providing adequate braking power for street sports driving, while also being low dust and noise. Brake pedal feel and control performance are high across a wide range of light to heavy vehicle applications. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 98.64 |
![]() | TRUST GReddy Sports Pad (Brake Pads) -15092001 | |
| Low steel, non asbestos. 0~600°C. Friction coefficient: 0.30~0.40. | DISCONTINUED |
![]() | DIXCEL FCR FP Disc Rotor (Brake Rotors) -FP 371 4019 | |
| Stronger type plain disc rotors with 20% increased carbon content. Heat treated for stable strength after repeated expansion/contraction. Improved distortion and crack resistance. Flexible surface hardness improves biting of pads. Excellent compatibility with various compounds. Brake squeal suppressed through excellent damping characteristics. Anti rust (special heat resistant coating). Pair of 2 (Left and right). | $ 130.14 |
![]() | DIXCEL FCR FS Disc Rotor More Info (Brake Rotors) -FS 371 4019 | |
| Stronger type slit (6) disc rotors with 20% increased carbon content. Heat treated for stable strength after repeated expansion/contraction. Improved distortion and crack resistance. Flexible surface hardness improves biting of pads. Excellent compatibility with various compounds. Brake squeal suppressed through excellent damping characteristics. Anti rust (special heat resistant coating). Pair of 2 (Left and right). 12 slit type option available (Please contact us for further details). | $ 165.41 |
![]() | DIXCEL PD Disc Rotor (Brake Rotors) -PD 371 4019 | |
| Standard type, plain disc rotor with enhanced corrosion resistance (rust prevention). High quality but reasonably priced, ideal for those who want a little more performance than standard disc rotors. Pair of 2 (Left and right). | $ 89.94 |
![]() | DIXCEL SD Disc Rotor More Info (Brake Rotors) -SD 371 4019 | |
| Slit type disc rotor. 20% improved braking performance for greater stability. Pair of 2 (Left and right). | $ 118.55 |
![]() | ENDLESS BASIC Brake Rotor More Info (Brake Rotors) -ER801B x 2 | |
| FC Forged. Pair of 2. 1 piece brake rotors. Ideal for users who wish to use a higher quality brake rotors when replacing standard units. | $ 272.12 |
![]() | ENDLESS CURVING SLIT Brake Rotor More Info (Brake Rotors) -ER801CS x 2 | |
| FC Forged (Heat treated). 1 piece curving slit (Slotted) brake rotors. Ideal for users maximise the potential of the brake pads. Pair of 2 (Left and right). | $ 328.81 |
![]() | ENDLESS E-SLIT Brake Rotor More Info (Brake Rotors) -ER801ES x 2 | |
| FC Forged. Pair of 2. 1 piece E-SLIT type (Slotted) brake rotors. Ideal for users who wish to improve lap times at the circuit and for better compatibility with higher performance brake pads. | $ 385.50 |
![]() | TRUST GReddy Brake Rotor (Brake Rotors) -1509301 | |
| Pair of 2. | DISCONTINUED |
![]() | APP Brake Caliper Kit (Brake Upgrade Kits) -WC41P-ZC31S | |
| Forged aluminium, heat resistant painted (blue) calipers. Lightweight 2 piece rotors, brackets, stainless mesh brake hoses, and brake pads. | DISCONTINUED |
![]() | APP Brake Caliper Kit (Titanium Coating) (Brake Upgrade Kits) -WC41K-ZC31S | |
| Forged aluminium, titanium ion plated calipers for better heat and abrasion resistance. Lightweight 2 piece rotors, brackets, stainless mesh brake hoses, and brake pads. | DISCONTINUED |
![]() | ENDLESS System Inch Up Kit (4 POT) More Info (Brake Upgrade Kits) -ECY4XZC31S (Old: EC4XZC31S ECZ4XZC31S) | |
| 4POT caliper kit mainly for compact and kei cars. A low-cost caliper that is perfect for those who want to step up from standard calipers and sports/racing brake pads. These calipers use the same lightweight and highly-rigid forged aluminum as other ENDLESS high-end calipers, providing sufficient brake control performance. 2 x Caliper (Blue alumite), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 1863.24 |
![]() | CUSCO Pillow Ball Bushes (Bushes and Collars) -616 464 BV | |
| Change to the rigid metal ball joint pivots, for precise control and stability! Race proven high quality spherical joint bearings result in no compression, no squeeze bushings, making the suspension work. Bearings are assembled in high quality shells with the rubber dust boots (on the majority of models). | $ 116.22 |
![]() | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | |
| Performance damper unit only. | DISCONTINUED |
![]() | CUSCO Lower Arm Bar Version II (Chassis Bars) -616 477 A | |
| Reduce chassis flex even further with these bars that have multiple mounting locations (more than 2). This greatly increases rigidity and helps maintain chassis stiffness during the hardest of cornering. It also improves steering rigidity, response and tire traction. | $ 96.06 |
![]() | NAGISA Auto Gachiri Support (Chassis Bars) -(GL)0001ZC31S | |
| 3D designed, patented steel inner fender braces. | DISCONTINUED |
![]() | OKUYAMA CARBING Frame Brace (Chassis Bars) -693 609 0 | |
| $ 106.77 |
![]() | OKUYAMA CARBING Lower Arm Bar (Chassis Bars) -680 609 0 | |
| DISCONTINUED |
![]() | OKUYAMA CARBING Trunk Brace Bar (Chassis Bars) -695 609 0 | |
| DISCONTINUED |
![]() | Sunline Racing SLR Inner Brace Kit (Chassis Bars) -(GL)SUCB-SUL-ZC31S-01 | |
| Improves stability at high speeds and cornering. | $ 164.78 |
![]() | Tryforce Front Tension Bar (Chassis Bars) -480012 | |
| $ 148.50 |
![]() | Blitz Damper ZZ-R (Coilover Kits) -92775 | |
| Full length adjustable, single cylinder (monotube) coilover suspension with 32 levels of damper adjustment. | $ 871.93 |
![]() | Blitz Damper ZZ-R Spec DSC (Coilover Kits) -93775 | |
| Full length adjustable, single cylinder (monotube) coilover suspension with (up to) 96 levels of electronically controlled damper adjustment. | $ 1239.72 |
![]() | CUSCO Compact S More Info (Coilover Kits) -616 60G A | |
| $ 698.43 |
![]() | CUSCO Compact Zero-1 More Info (Coilover Kits) -616 60H CB | |
| DISCONTINUED |
![]() | CUSCO Compact Zero-2 More Info (Coilover Kits) -616 60L CB | |
| DISCONTINUED |
![]() | CUSCO e-con2 (Coilover Kits) -00B 60J 1212 | |
| Real time, in cabin 40 Step Electronic Damping Force Controller. 7 colour illumination (selectable) display. | $ 259.18 |
![]() | CUSCO e-con2 G Sensor (Coilover Kits) -00B 60J G | |
| Optional part for use with e-con2. By connecting the optional G sensor, the direction and level of front and rear, right and left G are displayed in real time. The display can be switched between hi range (1.5 G) and low range (0.5 G). Maximum G force can be stored with the peak memory function. | DISCONTINUED |
![]() | CUSCO SPORT G (Coilover Kits) -616 64C SB0 | |
| Single cylinder, high volume type shock absorber. 24 step damping force adjustment (New needle valve type). Heavy duty knuckle brackets, for reduced flex when under high lateral and braking loads. Compatible with pillow upper mounts (Sold separately). Does not include upper mounts or springs. | $ 1462.34 |
![]() | CUSCO SPORT R More Info (Coilover Kits) -616 64R CB | |
| Full specification coilovers which allow precise settings for circuit driving. Single cylinder type shock absorber. 24 step damping force adjustment. Newly developed CUSCO SPORT Blue springs. Full length adjustable ride height. Pillow ball upper mounts (where possible). Ram type (inverted type) front shock absorbers. Camber adjustable bracket (front strut type only on non adjustable upper mount models). Suitable for use with S (Sports tyres). | $ 1462.34 |
![]() | CUSCO SPORT S More Info (Coilover Kits) -616 64S CB | |
| Single cylinder type shock absorber. 24 step damping force adjustment. Newly developed CUSCO SPORT Blue springs. Full length adjustable ride height. Ram type (inverted type) front shock absorbers. Camber adjustable bracket (front strut type only on non adjustable upper mount models). Suitable for high grip radial (Street) tyres. | $ 1298.65 |
![]() | CUSCO SPORT X (Coilover Kits) -616 64X CB | |
| Single cylinder type shock absorber. 3 way, 24 step damping force adjustment. Newly developed CUSCO SPORT Blue springs. Full length adjustable ride height. Separate tank. Pillow ball upper mounts (where possible). Ram type (inverted type) front shock absorbers. Camber adjustable bracket (front strut type only on non adjustable upper mount models). Suitable for use with S (Sports tyres). | $ 2826.47 |
![]() | CUSCO Street More Info (Coilover Kits) -616 62K CBF | |
| Provides lower ride height while maintaining comfort in daily driven applications. Entry level street system for the budget conscious. Low compression twin-tube shock absorber with redesigned base valve. Precision cut shock case thread with special coating. Quiet operation. Fixed damper front, 14 way rear adjustable shocks (8 way with some models). For use with standard upper mounts. | $ 657.38 |
![]() | CUSCO Street Zero More Info (Coilover Kits) -616 62P CBF | |
| Low compression twin-tube shock absorber with redesigned base valve. Full height adjustable structure & fixed damper set at most ideal rate (8 way rear adjustable shocks included with some models). Precision cut shock case thread with special coating. Quiet operation. Ribbed lower bracket made with specific metal according to each vehicle. Custom spring rates available at no extra cost. | $ 698.43 |
![]() | CUSCO Street Zero A More Info (Coilover Kits) -616 62N CB | |
| 40 step damping force adjustable. Full length/Ride Height Adjustable. | $ 873.04 |
![]() | DG-5 Suspension Kit (Coilover Kits) -(GL)SHCODG5ZC31S01 | |
| Coilover kit that adjusts to all driving styles, for street and track conditions. - 30 Step adjustable damper. - Enhanced strength utilising a 50/60mm diameter cylinder. - Superior strength steel brackets. - Adjustable upper mounts (Applicable models). - Additional helper/traction spring for improved tractability (Applicable models). - Highest quality Swift 65mm springs. | $ 1610.04 |
![]() | KYB Real Sports Damper Spec TR More Info (Coilover Kits) -MR-ZC31S | |
| $ 1076.75 |
![]() | OHLINS DFV Type HA Complete Kit (Coilover Kits) -(GL)SHCO-OHL-ZC31S-01 | |
| Screw type coilover system. | $ 1230.99 |
![]() | Suzuki Sport Height Adjustable Suspension Set (Coilover Kits) -560530-4650 | |
| DISCONTINUED |
![]() | TEIN EDFC (Coilover Kits) -EDK04-K4469 + EDK05-10120 | |
| Electronic Damper Force Controller. For use with TEIN suspension compatible with EDFC. | DISCONTINUED |
![]() | TEIN EDFC 5 (Coilover Kits) -EDK04-R6655 + EDK05-12120 | |
| Automatic and flexible adjustment with new Jerk-Reactive control for enhanced driving experience. EDFC5 utilizes jerk-reactive adjustment feature, which is developed as a part of industry-academia collaboration with Prof. Dai Watanabe of Shibaura Institute of Technology, successfully combining both sharp handling and comfortable ride, to automatically provide most desirable driving behavior for all drivers. AI (learning function) helps to realize suitable driving feel, without sense of discomfort, for all sorts of situations. In addition, EDFC5 employs new approach to control motors to reduce operating sound, to maintain quietness like original parts/components. Controller screen uses VA panel, as opposed to HTN panel used in previous models, for better looking and easy-to-read display. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $ 519.64 |
![]() | TEIN EDFC 5 and GPS Kit (Coilover Kits) -EDK04-R6655 + EDK05-12120 + EDK07-P8022 | |
| Automatic and flexible adjustment with new Jerk-Reactive control for enhanced driving experience. EDFC5 utilizes jerk-reactive adjustment feature, which is developed as a part of industry-academia collaboration with Prof. Dai Watanabe of Shibaura Institute of Technology, successfully combining both sharp handling and comfortable ride, to automatically provide most desirable driving behavior for all drivers. AI (learning function) helps to realize suitable driving feel, without sense of discomfort, for all sorts of situations. In addition, EDFC5 employs new approach to control motors to reduce operating sound, to maintain quietness like original parts/components. Controller screen uses VA panel, as opposed to HTN panel used in previous models, for better looking and easy-to-read display. GPS kit allows longitudinal and lateral G-actuated and speed-sensitive automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $ 570.22 |
![]() | TEIN EDFC Active (Coilover Kits) -EDK04-P8021 + EDK05-10120 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor allows longitudinal G-actuated automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN EDFC Active and GPS Kit (Coilover Kits) -EDK04-P8021 + EDK05-10120 + EDK07-P8022 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor and optional GPS kit allows longitudinal G-actuated and speed-sensitive automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN EDFC Active PRO and GPS Kit (Coilover Kits) -EDK04-Q0349 + EDK05-10120 + EDK07-P8022 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor and optional GPS kit allows longitudinal and lateral G-actuated and speed-sensitive automatic adjustment of damping force while driving. PRO features: individual adjustment of 4 shock absorbers, vehicle speed pulse input and 2 additional input ports. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $ 471.45 |
![]() | TEIN EDFC ActivePRO (Coilover Kits) -EDK04-Q0349 + EDK05-10120 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor allows longitudinal and lateral G-actuated automatic adjustment of damping force while driving. PRO features: individual adjustment of 4 shock absorbers, vehicle speed pulse input and 2 additional input ports. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $ 412.55 |
![]() | TEIN EDFC II (Coilover Kits) -EDK04-P9669 + EDK05-10120 | |
| Electronic Damper Force Controller II. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN FLEX COMPACT (Coilover Kits) -DSU32-71AS2 | |
| DISCONTINUED |
![]() | TEIN FLEX Z (Coilover Kits) -VSU46-C1AS2 | |
| Full-spec high-quality damper at a smashing low price. Twin tube. Full length and damping force adjustable. | $ 826.20 |
![]() | TEIN MONO FLEX (Coilover Kits) -GSU32-F1AS2 | |
| DISCONTINUED |
![]() | TEIN MONO FLEX (Custom) (Coilover Kits) -CM-GSU32-F1AS2 | |
| Custom made damper (Made to order). | $ 2197.52 |
![]() | TEIN Street Advance Z (Coilover Kits) -GSU46-91AS2 | |
| 16 step damper adjustable (simultaneous compression and rebound). Thread type height adjustable. Twin-tube damper. For use with standard upper mounts. EDFC compatible (most models). All new sealed structure design, greatly reducing production cost. | $ 637.18 |
![]() | TRUST GReddy Performance Damper Type-S (Coilover Kits) -14092201 | |
| Sports suspension kit suitable for enjoying the circuit, while maintaining ride quality around town on the streets. Linear damping force, supporting the stable driving. A wide range of damping characteristics makes it possible to achieve both supple ride comfort, and sports performance. | $ 954.89 |
![]() | Project μ (Mu) P.MU Master Cylinder Cap (Other) -ACC-TC18 | |
| A simple design that simply covers the standard cap. Green alumite color finish that can be attached to various car models (if the size matches). | $ 27.87 |
![]() | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | |
|   | $ 12.60 |
![]() | PROVA Resevoir Tank Cover (Other) -90000JL0200 | |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
![]() | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | |
| Mechanical lifter kit. | DISCONTINUED |
![]() | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.13 |
![]() | Monster Sport Rear Camber Shim (Rods and Control Arms) -586500-4650M | |
| Rear camber shim for wheel alignment setting brings cornering performance during sports driving. Secures tire grip during cornering and increase the handling performance of the vehicle. | DISCONTINUED |
![]() | MOONFACE Super Lap Adjustable Stabi Link (Rods and Control Arms) -SAL601 | |
| Adjustable stabilizer (Sway bar) links. | $ 206.29 |
![]() | MOONFACE Super Lap RC Arms (Rods and Control Arms) -SAA61 | |
| Roll Center Arms. Optimises suspension geometry by correcting the roll center to appropriate values especially in excessively lowered applications. | DISCONTINUED |
![]() | Rs Racing Service RRP Camber Adjust Lock Kit (Rods and Control Arms) -S-312 | |
| Prevents shift of camber bolts during heavy load. Adjustable width to cater for various types of damper/coilover. | DISCONTINUED |
![]() | Rs Racing Service RRP Chromoly Heavy Duty Camber Bolt (Rods and Control Arms) -S-303 | |
| For adjusting the front camber of the Swift. The RRP bolts are made of chromium-moly material and are nearly twice as strong as the standard bolts, so you can use them with confidence. Adding camber can improve road contact when cornering on a circuit or winding road. | $ 34.33 |
![]() | Rs Racing Service RRP Reinforced Front Lower Arms (Rods and Control Arms) -S-300 | |
| DISCONTINUED |
![]() | SunLine Racing Front Lower Arm Kit (Rods and Control Arms) -(GL)SHRC-SUL-ZC31S-01 | |
| DISCONTINUED |
![]() | TM-SQUARE Camber Shim (Rods and Control Arms) -TMCS-C00901 | |
| Rear camber shim kit. | $ 142.94 |
![]() | TM-SQUARE Toe Less Shim (Rods and Control Arms) -TMCS-T00904 | |
| Shims to reduce rear toe while retaining camber. | $ 80.37 |
![]() | TRUST Rear Camber Adapter (Rods and Control Arms) -14093400 | |
| Rear camber shims. Changes camber (and toe in) on rear torsion beam type suspension. | $ 73.21 |
![]() | ESPELIR Super DOWNSUS More Info (Springs) -ESS-742 | |
| Designed individually for a wide variety of vehicles so that the lowering amount is ideal. The stroke amount - which determines the riding comfort is accurately calculated, then design and development is carried out as to achieve both lowdown which tends to be inversely proportional and riding comfort. In addition, the height of the spring at maximum load is grasped for each vehicle type and reflected in the stress calculation, making it a product with excellent durability without fatigue. | $ 124.72 |
![]() | ESPELIR Super DOWNSUS Rubber (Springs) -BR-742F | |
| When installing low down spring, the vehicle height will drop and the suspension stroke will decrease at the same time. This is because the length of the standard bump rubber is set to the standard vehicle height, and if the low down spring is mounted as it is, the bump rubber will touch when going over bumps (This can happen even when the car is stationary). In this state, the stroke of the lowering range (range of movement of the spring) is completely lost and it is impossible to further lowered. This is especially the case in applications with large amount of reduction in ride height (Eg. Super DOWNSUS Type-2) is installed, the specified lowering amount will not be as set. In addition, the feeling of thrusting up due to the unevenness of the road surface cannot be absorbed, which may cause a lumpy sound or a creaking noise, and when the steering wheel is turned, an unpleasant noise is generated. With the installation of the Super DOWNSUS Rubber, these issues are greatly improved, and driving performance (braking, cornering performance, etc.) and riding comfort are greatly improved. Depending on the car model, there may be settings only for the front or only the rear. The shape and installation method of this product differ depending on the car model. | $ 33.70 |
![]() | RS-R RS-R Down Suspension Coil (Springs) -S135D | |
$ 107.71 |
![]() | RS-R Ti2000 Suspension Coil (Springs) -S135TD | |
| Titanium formulated for extreme durability (higher sag resistance and corrosion resistance), and maximum drop height without compromising ride comfort. With the new materials used in the Ti2000, it has become possible to manufacture a highly durable suspension coil, with a smaller diameter, and fewer spring coils. The result is lightweight springs making a noticeable difference in driving performance. For example: Toyota Altezza SXE10: 7.0398kg (Std: 9.3594kg), 24.7% reduction. | $ 152.12 |
![]() | TANABE SUSTEC DF210 (Springs) -ZC31SDK | |
| Dress Up Form. Set of 4. | DISCONTINUED |
![]() | TANABE SUSTEC GF210 (Springs) -ZC31SGK | |
| Grip Feeling. Set of 4. | DISCONTINUED |
![]() | TEIN HIGH.TECH Springs (Springs) -SKU32-G1B00 | |
| Luxury Master. Stylish and comfortable - the ultimate lowering springs. Light weight and flexible vanadium alloy (SAE9254) provides longer stroke, improving the spring's capability to absorb bumpiness/roughness of road surfaces, thus providing better maneuverability and stability. Not only durable, but also provides sag prevention qualities. Perfect spring rate designed for each vehicle type. | DISCONTINUED |
![]() | TEIN S.TECH Springs (Springs) -SKU32-S1B00 | |
| Dress Up Master. Easy lowering springs, in green to brightly decorate your suspension. Simple suspension tuning for beginners - at an affordable price. | $ 175.58 |
![]() | TRUST GReddy BL Comfort Down Spring (Springs) -14091317 SZG017 | |
| BL Comfort Springs produces an attractive style with a moderate drop in ride height while maintaining a comfortable ride. Designed for safe and calm handling characteristics even with the lowered ride height. Vanadium is mixed as metal additive in order to be durable for hard repetition of extension and compression during sports driving. The springs maintain high strain and high heat resistance and is durable against sag, maintaining stable performance. Different from springs designed only for low ride height, TRUST GReddy pursued the ideal design as a tuning parts maker. Total balance was considered while using the standard genuine shock absorber, calculate preload and it ensures stable traction when cornering. BL Comfort Spring is considered rebound performance conspicuous, and simultaneously enables comfortable ride, spring rate is suitable 10-20% up than standard genuine spring. Black coated, double shot peened. | $ 139.21 |
![]() | CUSCO Hybrid Strut Tower Bar (Strut Tower Bars) -616 542 A | |
| Hybrid oval shaft. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Two center bar types are available, specifically set per application. Includes hybrid bushes. | $ 99.02 |
![]() | CUSCO Strut Tower Bar Type OS (Strut Tower Bars) -616 540 A | |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. | $ 81.26 |
![]() | HKS Kansai Tower Bar (Strut Tower Bars) -KTS002 | |
| DISCONTINUED |
![]() | LAILE Beatrush Strut Tower Brace (Strut Tower Bars) -S88041-FTA | |
| Strut tower bar. | $ 100.94 |
![]() | OKUYAMA CARBING Strut Tower Bar More Info (Strut Tower Bars) -614 609 0 | |
| $ 126.48 |
![]() | CUSCO Centre Lock Pillow Ball Upper Mounts (Upper Mounts) -616 6SR 01S | |
| Sharpens handling, more direct feel. This product is a necessity for high performance driving, dedicated for the race track. Vehicles with high grip tires, still equipped with the normal rubber factory upper mounts, usually have the tendency of camber fluctuations causing understeer. This is due to the rubber absorbing the lateral G and stretching out of their static specification. By replacing the easily malleable factory rubber with CUSCO's pillowball units, the user will experience an efficient suspension movement, relative to direct road surface feedback and increased tire grip. | $ 211.96 |
![]() | Monster Sport Heavy Duty Upper Mount Set (Upper Mounts) -541510-4650M | |
| $ 84.00 |
![]() | TM-SQUARE Pillow Upper (ML) (Upper Mounts) -TMPU-R01111 | |
| Aluminium block, pillow ball joint upper mounts. | $ 170.13 |
![]() | Tryforce Adjustable Pillow Upper Mounts (Upper Mounts) -410031 | |
| $ 209.13 |
![]() | Blitz Racing Wheel Nut (Wheel Nuts) -14010 | |
| High-strength nuts made from forged SCM435 chrome-molybdenum steel. Lightweight nuts, weighing just 47g each. Made in Japan. | $ 22.99 |
![]() | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | |
| Inconel 625 complexe alloy steel wheel nuts. | $ 33.01 |
![]() | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.15 |
![]() | Monster Sport Lightweight Heptagon Wheel Nut Set (Wheel Nuts) -684520-0000M | |
| Sports wheel nut "Lightweight heptagon wheel nut" which adopted heptagon (heptagonal) design with theft prevention function. The material is a high strength chromium vanadium steel that is not easily loosened even at high temperatures, making it both durable, smaller and lighter. The aluminum head with anodized and engraved MONSTER SPORT logo is ideal for dressing up your cars look. | DISCONTINUED |
![]() | Monster Sport Lightweight Heptagon Wheel Nut Set Type 2 (Wheel Nuts) -684520-0020R | |
| Sports wheel nut "Lightweight heptagon wheel nut" which adopted heptagon (heptagonal) design with theft prevention function. The material is a high strength chromium vanadium steel that is not easily loosened even at high temperatures, making it both durable, smaller and lighter. The aluminum cap on the tip gives the wheel an accent despite being a short size ideal for compact cars. | $ 88.19 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 83.52 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 114.64 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 137.38 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 113.44 |
![]() | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | |
| $ 218.89 |
![]() | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | |
| DISCONTINUED |
![]() | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 27.81 |
![]() | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | |
| Chrome molybdenum steel (SCM435) wheel bolts. | $ 40.03 |
![]() | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 35.84 |
![]() | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 43.46 |
![]() | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.15 |
![]() | Suzuki Sports Lightweight Heptagon Wheel Nut Set (Wheel Nuts) -684520-0000 | |
| DISCONTINUED |
![]() | WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | |
| DISCONTINUED |
![]() | WORK Lock Nut Set (Wheel Nuts) -240254 | |
| Robust steel lock nut set. The special lock nuts prevent tightening or removal with a regular torque wrench, helping to prevent theft. | $ 66.77 |
![]() | WORK RS Nut (Wheel Nuts) -240007 | |
| This lightweight lock nut set is made from A6061-T6 material, which is also used in aircraft, and offers excellent strength and hardness. The anodized surface not only provides excellent corrosion and abrasion resistance, but its colorful design also adds a touch of fashionability, enhancing the dress-up effect. Thanks to its carefully calculated shape and design, the weight is 25g, less than half that of the average steel nut. The nuts are 21HEX, non-penetrating type with a total length of 34mm. The WORK logo "W" is featured on the top of the nuts and lock nuts. Pack of 20 (16 nuts, 4 lock nuts, 1 adapter wrench). | $ 84.72 |
![]() | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | |
| $ 28.47 |
![]() | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | |
| $ 27.46 |
![]() | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | |
| $ 38.55 |
![]() | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | |
| Spring type rear hatch/boot lid hooks. | $ 30.55 |
![]() | Monster Sport Air Outlet Carbon Bonnet (Bonnets) -8FQB12 | |
| DISCONTINUED |
![]() | STOUT Aero Bonnet Type S (Bonnets) -(GL)ETBN-STO-ZC31S-01 | |
| $ 835.25 |
![]() | STOUT Light Weight Bonnet (Bonnets) -(GL)ETBN-STO-ZC31S-04 | |
| Same design as standard bonnet but made with lightweight material. | $ 659.51 |
![]() | TRUST GReddy Carbon Front Grill (Front Grilles) -17091000 | |
| DISCONTINUED |
![]() | TRUST GReddy Aero Kit Front Skirt Ver 2 (Front Spoilers (Lip Spoilers)) -17090004 | |
| $ 159.99 |
![]() | TRUST GReddy Front Skirt (Front Spoilers (Lip Spoilers)) -17090000 | |
| $ 163.46 |
![]() | Sunline Racing SLR Multi LED Tail Lamp (Lights (Head, Tail, Indicator)) -(GL)ETLI-SUL-ZC31S-01 | |
| $ 406.29 |
![]() | TM-SQUARE Wide Range Door Mirror (Mirrors and Mirror Covers) -TMET-Q02401 | |
| Eliminates the blind spots of standard mirrors. These wide Range Door Mirror utilizes a convex mirror design to expand the rearward field of view. This minimizes blind spots diagonally behind the vehicle. Special coating with high anti-glare properties, significantly reduces glare from the headlights of following vehicles at night. Installed over standard mirrors with double sided tape. | $ 91.68 |
![]() | LAILE ARP SPORT Mud Flaps (Mud Flaps) -A68041-F2 | |
| Protect vehicle body and suspension from stones and debris kicked up by tyres. | $ 84.85 |
![]() | OKUYAMA DASH Mud Flap (Mud Flaps) -550 609 0 | |
| Protects body and floor from mud and stones during off road rally. Lightweight and durable urethane (red). | DISCONTINUED |
![]() | Garage Vary Universal Turbulator (Other) -30-4001 | |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | $ 69.04 |
![]() | KENSTYLE Accent Screws (Other) -(GL)AS01 | |
| Universal dress up accent screws. Ideal for completing the wide fender look. | $ 27.72 |
![]() | TM-SQUARE Door Handle Protector (Other) -TMHP-D01 | |
| $ 24.88 |
![]() | Monster Sport Carbon GT Wing (Spoilers/Wings) -8FQW10 | |
| $ 719.98 |
![]() | SARD GT Wing 014 More Info (Spoilers/Wings) -61554-1400 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1410.98 |
![]() | SARD GT Wing 015 More Info (Spoilers/Wings) -61557-1610-Type1 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1470.82 |
![]() | TRUST GReddy Rear Under Spoiler (Spoilers/Wings) -17090001 | |
| DISCONTINUED |
![]() | TRUST GReddy Rear Wing Spoiler (Spoilers/Wings) -17071002 | |
| DISCONTINUED |
![]() | Suzuki Door Visors (Window Visors) -83905-63JV1 (Old: 83905-63J01) | |
| $ 62.99 |
![]() | Suzuki Ventilated Door Visors (Window Visors) -99000-99064-PAR | |
| DISCONTINUED |
![]() | Maroya Bonnet Damper (Bonnet Dampers) -119 | |
| $ 68.66 |
![]() | TRUST Engine Hood Lifter (Bonnet Dampers) -18590101 | |
| Hydraulic bonnet lifters. Real carbon surface cylinder. Set of 2 (Left and right). | DISCONTINUED |
![]() | HKS Kansai Carbon Front Short Lip (Exterior Parts) -KAS002 | |
| DISCONTINUED |
![]() | ORIGIN Front EX Canard (Exterior Parts) -W037-SET | |
| Universal. Pair (Left and right). | $ 95.05 |
![]() | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET | |
| Universal. Pair (Left and right). | $ 149.29 |
![]() | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | |
| Universal. Pair (Left and right). | DISCONTINUED |
![]() | SARD Aero Blade (Exterior Parts) -61967 | |
| Sold individually (1 piece). | $ 20.31 |
![]() | SARD Front Bumper Canard (Exterior Parts) -61965 | |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
![]() | SARD Front Under Flap (Exterior Parts) -61966 | |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
![]() | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | $ 38.68 |
![]() | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | |
| $ 217.69 |
![]() | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | |
| Gas/Petrol cap cover. | DISCONTINUED |
![]() | Blitz i-Burner Expansion Kit (Globes) -14566 | |
| DISCONTINUED |
![]() | Blitz i-Burner Spark Lights (Globes) -14565 | |
| DISCONTINUED |
![]() | Ganador LED Super Mirror (Mirrors) -LM-53PCL | |
| DISCONTINUED |
![]() | Ganador Super Mirror (Mirrors) -SM-53PCL | |
| DISCONTINUED |
![]() | HKS Kansai Carbon Mirror Cover (Mirrors) -KAS01C | |
| 0.5mm Dry Carbon Covers (Pair). | DISCONTINUED |
![]() | Suzuki Sport Sports Mirror (Mirrors) -791500-4650 | |
| DISCONTINUED |
![]() | HKS Billet Oil Filler Cap (Oil Filler Caps) -24003-AN001 | |
| Duralumin. | $ 51.15 |
![]() | Monster Sport Racing Oil Filler Cap (Aluminium) (Oil Filler Caps) -293120-0000M | |
| 105g. M33x3.5. | DISCONTINUED |
![]() | Monster Sport Racing Oil Filler Cap (Black) (Oil Filler Caps) -293110-0000M | |
| Duracon. 55g. M33x3.5. | DISCONTINUED |
![]() | Suzuki Sport Racing Oil Filler Cap (Aluminium) (Oil Filler Caps) -293120-0000 | |
| 105g. M33x3.5. | DISCONTINUED |
![]() | Suzuki Sport Racing Oil Filler Cap (Black) (Oil Filler Caps) -293110-0000 | |
| Duracon. 55g. M33x3.5. | DISCONTINUED |
![]() | Monster Sport Battery Stay More Info (Other) -297100-0000SA | |
| Billet aluminium battery bracket. Appearance and strength are improved while minimising weight. Recommended for refreshing/replacing the corroded standard stay (bracket). | $ 53.48 |
![]() | TRUST GReddy Cable Ties (Other) -18001742 | |
| GReddy logo cable ties. | $ 14.19 |
![]() | HKS Emblem (Stickers and Emblems) -51003-AK027 | |
| Silver. 87 x 35mm. | DISCONTINUED |
![]() | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | $ 15.75 |
![]() | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | |
| ABS resin emblem of Tuned by HKS. Size:115mm x 19mm. | $ 28.22 |
![]() | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | $ 12.35 |
![]() | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | $ 12.35 |
![]() | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | $ 12.35 |
![]() | HKS Sticker - Metal Logo (Stickers and Emblems) -51007-AK231 | |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | $ 12.35 |
![]() | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | $ 12.35 |
![]() | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | |
| HKS logo on oil color. | $ 12.35 |
![]() | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | |
| Tuned by HKS sticker. Hairline finish. | $ 12.35 |
![]() | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | $ 12.35 |
![]() | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | |
| Small-sized transcription sticker. | $ 12.35 |
![]() | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | |
| ABS plastic emblem with chrome (mekki) finish. | $ 23.56 |
![]() | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | |
| High brightness reflective sheet. | $ 24.76 |
![]() | Monster Sport M16A Monster Tuning Sticker (Stickers and Emblems) -896160-0000M | |
$ 16.38 |
![]() | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
![]() | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | $ 8.94 |
![]() | Suzuki Body Graphic (Sports Mind) (Stickers and Emblems) -99000-99036-B21 | |
| $ 11.34 |
![]() | Suzuki Sticker (Sports Mind) (Stickers and Emblems) -99000-99036-A16 | |
| $ 6.30 |
![]() | TOMEI 70 Sticker (Stickers and Emblems) -761031 | |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | $ 9.76 |
![]() | TOMEI Emblem (Stickers and Emblems) -763000 | |
| 120 x 22mm. | $ 19.65 |
![]() | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
![]() | Top Fuel Emblem (Stickers and Emblems) -26735831 | |
| Metal plate emblem with engraved Top Fuel logo. | $ 12.28 |
![]() | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | |
| DISCONTINUED |
![]() | Blitz Towing Strap (Tow Hooks/Straps) -13890 | |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 20.31 |
![]() | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | $ 33.07 |
![]() | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | |
| $ 41.04 |
![]() | HKS Kansai Tow Hook (Tow Hooks/Straps) -KAS010 | |
| Ball lock type. Can be fixed at 0 and 90 degree angles. HKS Kansai logo on tow hook extension portion. Made in Japan. | DISCONTINUED |
![]() | LAILE Beatrush Tow Hook (Tow Hooks/Straps) -S108041TF-FS | |
| $ 62.17 |
![]() | OKUYAMA CARBING Flip Up Tow Hook (Tow Hooks/Straps) -301 046 0 | |
| Steel swivel tow hook for installation to standard tow hook hole. Can locked at 0degree/90degrees/180degrees positions to prevent from scratching car body. Drive vehicle on the street with the hook locked in folded position. | $ 105.70 |
![]() | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | $ 63.93 |
![]() | TOMEI Towing Strap (Tow Hooks/Straps) -763032 | |
| Universal towing strap (belt). Maximum Towing Capacity: 3.0 tons. Loop Length: 10 cm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 42.33 |
![]() | BBS Air Valve Cap (Valve Caps) -P5615011 x 4 | |
| Set of 4. | $ 19.84 |
![]() | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | $ 27.15 |
![]() | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC50 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | $ 13.13 |
![]() | Project μ (Mu) Air Valve Cap (Old) (Valve Caps) -ACC-TC15 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | DISCONTINUED |
![]() | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | $ 36.85 |
![]() | TRUST GReddy Air Valve Cap (Valve Caps) -18001996 | |
| Aluminium air valve caps (Titanium gradation colour). 11mm x 11mm. Set of 4. | $ 15.43 |
![]() | Monster Sport Aero Wiper Blades (Wiper Blades) -763500-4600M | |
| Aero designed blade body that suppresses lift and reduces air resistance. Set of 2 (Left and right). | $ 63.05 |
![]() | Rs Racing Service RRP Carbon Aero Wiper (Wiper Blades) -B33-204 | |
| Aerodynamic wipers. Carbon look, finished individually by hand. | $ 66.96 |
Back | Back to TOP